Abstract
The aim of this study is to compare biomechanical features of different devices used in clinical routine for temporary epiphysiodesis (eight-Plate® and FlexTackTM). The tested implants were divided into four different groups (eight-Plate® vs. FlexTackTM for lateral and anterior implantation) á 10 samples for testing implanted eight-Plate® vs. FlexTackTM in fresh frozen pig femora for maximum load forces (Fmax) and axial physis distance until implant failure (lmax). A servo hydraulic testing machine (858 Mini Bionix 2) was used to exert and measure reproducible forces. Statistical analyses tested for normal distribution and significant (p < 0.05) differences in primary outcome parameters. There were no significant differences between the eight-Plate® lateral group and the FlexTackTM lateral group for neither Fmax (p = 0.46) nor lmax (p = 0.65). There was a significant higher Fmax (p < 0.001) and lmax (p = 0.001) measured in the eight-Plate® group compared to the FlexTackTM group when implanted anteriorly. In anterior temporary ephiphysiodesis, eight-Plate® demonstrated superior biomechanical stability. At this stage of research, there is no clear advantage of either implant and the choice remains within the individual preference of the surgeon.
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
1 Introduction
Angular deformities of the lower extremity—especially of the knee in the frontal plane—are considered as pre-arthrotic deformities [1, 2].
Treatment options to address these deformities are osteotomies that are surgically challenging and accompanied by a high risk of developing complications such as a compartment syndrome, neurovascular injuries, or over-/undercorrections [3]. Another disadvantage of osteotomies is the necessity of an internal or external fixation and thus limited weight bearing and mobilisation for at least 6 weeks after operation [3]. In case of open growth plates (in children and adolescents), corrective osteotomies of the distal femur or the proximal tibia can be avoided by growth guiding techniques such as (hemi)epiphysiodeses.
There are two categories of epiphysiodesis. The permanent and irreversible epiphysiodesis—originally described by Phemister—requires the destruction of the epiphyseal plate and is therefore indicated only when precisely calculating the remaining growth and determining the perfect age for surgery [3]. Canale and Christian [4] and Ogilvie and King [5] have focused on permanent percutaneous methods of minimal invasive epiphysiodesis using image intensification. Using these techniques, the physis is ablated or destroyed by drilling or curetting through small medial and lateral incisions. In 1998, Metaizeau et al. [6] described a further method of epiphysiodesis by placing two screws obliquely across the physis. The priniciple of this technique is based on applying compressive forces onto the physis [7].
The first temporary and possibly reversible hemiepiphysiodesis was described by Blount. His technique avoids physical damage by bridging the physis. This technique was described as early as 1949 for the first time and is performed by implanting 2 or 3 staples [8]. Increasing the number of staples correlates with a higher risk of damaging the physis. Therefore, Blount’s technique requires an accurate calculation of the remaining growth as well [7]. Due to the risk of damaging the physis, operations using this technique are consequently performed towards the end of growth and not during childhood [3].
Steven et al. described a “tension band principle” technique for temporary hemiepiphysiodesis by implanting an eight-Plate® (Orthofix, Lewisville, USA), which can be applied in younger patients as well [9]. Using this implant, a plate bridging the physis is used and fixed by two screws that are not fixed-angle. These plates lead to a temporary hemiepiphysiodesis with a good pressure distribution around the physis [3]. Different retrospective studies showed that eight-Plate® are as effective as staple hemiepiphysiodesis for guided growth in cases of angular deformity, even in younger patients [3, 10, 11].
Another implant, with a similar functional principle for guided growth, is the “FlexTack TM” (Merete, Berlin, Germany), which in contrast to the eight-Plate® is a one-piece implant without mechanical slackness.
This biomechanical in-vitro study was initiated to compare the biomechanical characteristics of this new FlexTackTM implant with the well-known eight-Plate® implant. Due to differences in design and implantation technique, it was hypothesised:
-
(1)
that the FlexTackTM can bear larger forces than the eight-Plate® before implant failure is observed and
-
(2)
that the FlexTackTM has a higher corrective potential as it develops momentum right after implantation, while the eight-Plate® has to experience angulation first to overcome initial mechanical slackness [11, 12].
2 Materials and methods
In this study, eight-Plate® (plate and screws) and “FlexTackTM” (flexible staples; Fig. 1) were tested for biomechanical features. For implant testing 40 fresh frozen pig femora, harvested at animal’s age of 9–12 months were used. The existence of an open physis in the femora was verified by x-ray and subsequent macroscopic examination when removing attached soft tissue from the bones. The femora were stored in a vacuum plastic bag and frozen at −24 °C before being used for testing. 24 h before implantation of eight-Plate® or FlexTackTM, the femora samples were defrosted and kept at 6 °C. Before implantation, the cortical bone was cut at the height of the distal femoral physis. The opposite side of the femoral bone was opened as well to confirm the anatomical structure of the physis. The femoral shaft and the distal femoral condyle were fixed with polymethylmethacrylat (PMMA cement) (Technovit 3040, Heraeus Kulzer, Wehrheim, Germany). Samples were subsequently randomised into four groups á 10 samples each.
Group 1 tested laterally implanted eight-Plate®, and Group 3 anteriorly implanted eight-Plate®. In analogy, groups 2 and 4 represented laterally and anteriorly implanted FlexTackTM. To test for the influence of implant positioning with regard to the femoral axis, groups 1 and 2 were divided in two subgroups each, including rectangular (>70°) and angulated (<70 °) implants (Figs. 2 and 3). In the FlexTackTM group samples were distributed even. In the eight-Plate® group there was a slight mismatch with less rectangular (4) and more angulated (6) samples. This difference in distribution is explained by an angel of less than 70° in one case that was initially assigned to the rectangular group.
For biomechanical evaluation, prepared femora were fixed in a servo hydraulic material testing machine (858 Mini Bionix 2, MTS, MN USA). The experimental set up was constructed as an axial pull out test. Strain was carried out with a preload pressure of 20 N and a constant speed of 10 mm/min. The fixation in the material testing machine was performed by a flange coupling and a cardan joint. The forces exerted (N) and the axial opening of the physis (mm) were recorded with a frequency of 100 Hz. A broken implant or an emigration of the implant were considered as fixation failure.
Final outcome parameters were axial distance until fixation failure (lmax in mm) and the maximum loads (Fmax in N) applicable to the implant before failure. Forces required for axial distraction of the physis of 2 mm and 4 mm were measured (F2mm and F4mm; Fig. 4).
The statistical analysis was carried out with SPSS 21.0 (IBM Corporation, Armonk, NY) software. Based on the Kolmogorov Smirnov test, the data was tested for normal distribution, followed by simple t-testing; p < 0.05 was considered significant.
3 Results
3.1 A. eight-Plate® lateral (Group 1) and FlexTackTM lateral (Group 2)
There was no significant difference (p = 0.46) between the average Fmax for the eight-Plate® lateral group (Group 1; 550 ± 157.5 N) and the FlexTackTM lateral group (Group 2; 506.1 ± 91.3 N). F2mm (Group 1: 289.2 ± 83.7 N vs. Group 2: 216.3 ± 40.6 N; p = 0.27) and F4mm (Group 1: 450.5 ± 120.8 N vs. Group 2: 422.2 ± 52.9 N; p = 0.51) did not differ significantly between both groups. There were no significant differences in average forces at 1–6 mm displacement and for lmax (Group 1: 7.1 ± 2.3 mm vs. Group 2: 7.7 ± 2.7 mm; p = 0.65; Fig. 5).
In Group 1, four plates were implanted angulated and six were implanted rectangular. There was no statistically significant difference between both types of angulation concerning Fmax (p = 0.19) and lmax (p = 0.18). In Group 2, half of the FlexTackTM were implanted straight and the remaining five were implanted rectangular. No significant differences concerning Fmax (p = 0.49) or lmax (p = 0.09) were found.
In five cases of Group 1 the reason for the implant failure was a screw breakout with bone tissue and in the other five cases cut-out of the screws without bone tissue. In Group 2 only two implant failures were associated with the original bone tissue breakout.
3.2 B. eight-Plate® anterior (Group 3) and FlexTackTM anterior (Group 4)
In Group 3, average Fmax was significantly higher (544.9 ± 87.4 N) than average Fmax in Group 4 (371.5 ± 60.3 N; p < 0.001). F4mm was significant higher for Group 3 than for Group 4 (Group 3: 463.3 ± 73.2 N vs. Group 4: 328.8 ± 78.3 N; p = 0.01). There was no significant difference for F2mm between both groups (Group 3: 335.4 ± 59.9 N vs. Group 4: 303.6 ± 58.7 N; p = 0.25; Fig. 6).
lmax was significantly larger for Group 3 compared to Group 4 (Group 3: 6.8 ± 1.8 mm vs. Group 4: 3.9 ± 1.2 mm; p = 0.001).
In nine of ten cases, the reason for implant failure in Group 3 was a screw breakout with a fracture apart from the screw (screw within bony tissue) and in one case a solitary breakout of the screw without adherent bone tissue.
In Group 4, three of ten cases showed a cut-out of the FlexTackTM implant with a bone flake and seven cases a cut-out without adherent osseous flake.
4 Discussion
Angular osseous deformities of the lower extremity during the growth period can be treated by different surgical techniques. In fact, there are permanent epiphysiodeses using the Phemister technique and temporary epiphysiodeses using Blount staples as traditional options to correct angular deformities. Both of these techniques require accurate calculation of the remaining growth as the primary requires destruction of the epiphyseal plate and the temporary epiphysiodesis according to Blount exposes an increased risk of epiphyseal plate injury.
An alternative surgical solution was introduced by eight-Plate® implants. The principle of this technique is tethering of the physeal periphery while enabling growth in the rest of the physis [13]. It is a well-described and established method to correct coronal plane deformities of the knee with minimal complications and has been tested in various studies [14, 15]. An implant, which was introduced more recently, is the FlexTackTM implant, which follows a similar functional principle. The advantage of both techniques compared to the definitive epiphysiodesis is, that implants can be removed once the angular deformity has been corrected. So far, however, there are no biomechanical or clinical studies comparing both solutions.
This is the first study to compare biomechanical features of eight-Plate® and FlexTackTM in a porcine in vitro model. Although both implants differ in design, there was no difference detected between both implant types regarding maximum loads (Fmax) and axial physis distance until fixation failure (lmax) when implanted laterally. When implanted anteriorly, FlexTackTM tended to fail at significantly lower maximum loads and showed significantly shorter axial physis distances until failure compared to eight-Plate®.
It remains questionable whether this difference between both implants affects clinical routine as most implants are brought in laterally/medially to correct varus/valgus deformities and only a minor percentage is implanted anteriorly for correction of flexion deformities of the knee (e.g. in neuromuscular disorders). This study was performed on porcine distal lateral and anterior femora and tested for osseous stability only. It did not respect soft tissue—implant interaction. In clinical routine, we made the experience that patients tend to complain more often about soft tissue irritation when treated by eight-Plate® than by FlexTackTM.
It is not exactly clear which forces are acting on the implants in-vivo as tendons, muscles and connective tissue may reduce distractive forces. It remains discussable if the implant behaviour of eight-Plate® changes in vivo after some weeks as its initial mechanical slackness between plate and screws will be turned into rigidity after a certain degree of angulation has been reached. In contrast, FlexTackTM are primarily fixed-angle without mechanical slackness—which has the advantage of immediate correction potential. This fact may contribute to earlier implant failure in the present study as eight-Plate® yield a an initial greater distraction stability due to the mechanical slackness [16]. In the present study, two implants were implanted anteriorly and one only laterally, which was based on our clinical standard and experience.
Although there is initial mechanical slackness between screws and plate in eight-Plate® implants, screw threads yield a high initial stability within bone. Considering the implantation mechanics of FlexTackTM staples it may be assumed—although staple’s legs are barbed—that they are initially less strong fixated within osseous tissue. However, the titanium alloy microstructured surface of the later allows for a rapid osteointegration, which results in a strong bone purchase after some weeks. In clinical practice, this fact requires special instruments (U-shaped chisels) for removal of deeply integrated FlexTackTM staple legs, while eight-Plate® screws can be removed more easily. Thus, the present study cannot replicate implant-depend osteointegrative features.
The present study demonstrated that there are no biomechanical deficits when implanting the mentioned devices in either a rectangular or angular fashion.
Thus, clinical studies need to evaluate and directly compare both, eight-Plate® and FlexTackTM with regard to clinical and radiological correction potential, adverse events, patient’s convenience and cost-benefit analysis.
5 Conclusion
For lateral temporary epiphysiodesis there is no biomechanical difference between eight-Plate® and FlexTackTM regarding the maximum loads bearable by the implants as well as the maximal distraction distance of implants until failure. In anterior temporary ephiphysiodesis, eight-Plate® demonstrated superior biomechanical features regarding the above mentioned parameters. At this stage of research, there is no clear preference towards one or the other implant and the choice remains within the individual preferences of the surgeon.
References
Oest O. [The significance of axial misalignment as a pre-osteoarthrotic deformity, and its radiological assessment]. Unfallheilkunde 1978;81:629–33.
Niethard M, Deja M, Rogalski M. [Correction of angular deformity of the knee in growing children by temporary hemiepiphyseodesis using the eight-plate]. Z Orthop Unfall. 2010;148:215–21. https://doi.org/10.1055/s-0029-1240732.
Wiemann JMT, Tryon C, Szalay EA. Physeal stapling versus 8-plate hemiepiphysiodesis for guided correction of angular deformity about the knee. J Pediatr Orthop. 2009;29:481–5. https://doi.org/10.1097/BPO.0b013e3181aa24a8.
Canale ST, Christian CA. Techniques for epiphysiodesis about the knee. Clin Orthop Relat Res. 1990;81–5.
Ogilvie JW, King K. Epiphysiodesis: two-year clinical results using a new technique. J Pediatr Orthop. 1990;10:809–11.
Metaizeau JP, Wong-Chung J, Bertrand H, et al. Percutaneous epiphysiodesis using transphyseal screws (PETS). J Pediatr Orthop. 1998;18:363–9.
Cain M, Stephenson M, Umapathysivam K, et al. Effectiveness of different minimally invasive epiphysiodesis techniques in the management of pediatric leg length discrepancies: a systematic review protocol. JBI Database Syst Rev Implement Rep. 2016;14:14–24. https://doi.org/10.11124/JBISRIR-2016-002935.
Blount WP, Clarke GR. Control of bone growth by epiphyseal stapling; a preliminary report. JBJS. 1949;31A:464–78.
Stevens PM. Guided growth for angular correction: a preliminary series using a tension band plate. J Pediatr Orthop. 2007;27:253–9. https://doi.org/10.1097/BPO.0b013e31803433a1.
Kulkarni RM, Ilyas Rushnaiwala FM, Kulkarni GS, et al. Correction of coronal plane deformities around the knee using a tension band plate in children younger than 10 years. Indian J Orthop. 2015;49:208–18. https://doi.org/10.4103/0019-5413.152484.
Vogt B, Horter M, Rodl R. [Special topics in pediatric orthopedics: options and limits of growth guidance]. Orthopade 2014;43:714–24. https://doi.org/10.1007/s00132-013-2223-9.
Burghardt RD, Herzenberg JE, Standard SC, et al. Temporary hemiepiphyseal arrest using a screw and plate device to treat knee and ankle deformities in children: a preliminary report. J Child Orthop. 2008;2:187–97. https://doi.org/10.1007/s11832-008-0096-y.
Sinha R, Weigl D, Mercado E, et al. Eight-plate epiphysiodesis. Bone Jt J. 2018;100-B:1112–6. https://doi.org/10.1302/0301-620X.100B8.BJJ-2017-1206.R3.
Joeris A, Ramseier L, Langendorfer M, et al. Paediatric lower limb deformity correction with the Eight Plate: adverse events and correction outcomes of 126 patients from an international multicentre study. J Pediatr Orthop B. 2017;26:441–8. https://doi.org/10.1097/BPB.0000000000000397.
Park KH, Oh CW, Kim JW, et al. Angular deformity correction by guided growth in growing children: Eight-plate versus 3.5-mm reconstruction plate. J Orthop Sci. 2017;22:919–23. https://doi.org/10.1016/j.jos.2017.06.004.
Vogt B, Schiedel F, Rodl R. [Guided growth in children and adolescents. Correction of leg length discrepancies and leg axis deformities]. Orthopade. 2014;43:267–84. https://doi.org/10.1007/s00132-014-2270-x.
Funding
Open Access funding enabled and organized by Projekt DEAL.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare no competing interests.
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Struwe, C., Walter, S.G., Druschel, C. et al. Biomechanical evaluation of temporary epiphysiodesis at the femoral epiphysis using established devices from clinical practice. J Mater Sci: Mater Med 32, 41 (2021). https://doi.org/10.1007/s10856-021-06515-9
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s10856-021-06515-9