Abstract
Objective
To develop Austrian, Italian, and Polish general population value sets for the EORTC QLU-C10D, a cancer-specific utility instrument based on the EORTC QLQ-C30, and to descriptively compare their index scores for distinct health states.
Methods
The QLU-C10D descriptive system comprises 10 health attributes and each can take on 4 levels. A standardised and pre-tested methodology has been applied for valuations including a web-based discrete choice experiment (DCE). It was administered in 1000 general population respondents per country recruited via online panels, aiming at representativeness for core socio-demographic variables.
Results
In all three countries, the attributes with the largest impact on utility were physical functioning, pain, and role functioning. Cancer-specific dimensions with the largest impact were nausea and fatigue or bowel problems. Utility values of the worst health state (i.e. severe problems on all 10 dimension) were -0.111 (Austria), 0.025 (Italy), and 0.048 (Poland). Country-specific utilities differed for a selection of health states across the continuum. Austrian utilities were systematically lower for moderately and severely impaired health states.
Conclusion
QLU-C10D cancer-specific utilities can now be calculated in three more countries. Differences between countries indicate that careful consideration is required when using non-country-specific value sets in economic evaluations.
Similar content being viewed by others
Avoid common mistakes on your manuscript.
Introduction
Cost-utility analyses (CUAs) are an essential source of information for rational decision-making in resource allocation in health care. Their primary outcome is quality adjusted life years (QALYs), a parameter which integrates survival time and the “value” of a specific health state: the health utility. Health utilities are cardinal values that represent an individual’s preferences for specific health states, with “0” considered equivalent to death and “1” reflecting perfect health. Among the different preference-based methods used to obtain utilities, multi-attribute utility instruments (MAUIs) are popular. Well-known and frequently used MAUIs include the EQ-5D [1, 2] and the SF-6D [3]. Like most MAUIs, these are generic, i.e. they cover very general health aspects (such as mobility, pain, or self-care) which makes them applicable to a broad range of different health conditions. This breadth is valuable, but may come at the price of missing specific health issues relevant to certain conditions, such as nausea and vomiting in cancer [4, 5]. However, utility instruments using a disease-specific health state description system are relatively scarce.
Non-preference-based disease-specific quality of life (QOL) measures are widely used in clinical research. By definition, they include aspects of health relevant to a certain disease, which arguably may be more sensitive to clinical changes [5]. However, they do not allow utility scoring, and therefore cannot be used in cost-utility analysis.
The recent development of the EORTC Quality of Life Utility-Core 10 Dimensions (QLU-C10D) [6] contributes to closing this gap, as it is a MAUI based on the EORTC Quality of Life Questionnaire Core 30 (QLQ-C30) [7], the most widely used QOL profile measure in clinical oncology research [8]. It helps to overcome the lack of disease-specific utility instruments in the field of oncology by providing a health state classification system and utility algorithm using 13 key items of the parent instrument, covering 10 QOL dimensions.
QLU-C10D valuations are currently being performed for a range of countries and tariffs have already been published for Australia [9], Canada [10], Germany [11], and the UK [12]. In the present study, we aim to determine the utility weights for health states of the Austrian, Italian, and Polish version of the QLU-C10D. Furthermore, we descriptively compare the utilities of the three countries for selected QLU-C10D health states.
Methods
For QLU-C10 valuations a standardised survey has been developed consisting of a discrete choice experiment (DCE) for the valuation of health states as its core element, and of feedback questions on the participants’ experience of the DCE, self-report instruments on QOL (EORTC QLQ-C30, EQ-5D) and distress (Kessler K-10), and questions on basic socio-demographic and basic clinical information [13]. Before adopting the approach as method of choice for QLU-C10D valuations, feasibility and reliability have been established using quantitative and qualitative methods. The wording of the DCE tasks and different layouts have been pre-tested in general population respondents which showed that although perceived difficult the tasks were considered manageable [14]. Utility weights resulting from the DCE showed to be unbiased by the ordering of attributes in the DCE [15] and stable within respondents over time [16].
The QLU-C10D descriptive system [6] consist of 13 of the 30 items of the parent instrument EORTC QLQ-C30 [17] covering the 10 QOL domains physical functioning, role functioning, social functioning, emotional functioning, pain, fatigue, sleep disturbances, appetite loss, nausea, and bowel problems. Each can take on 4 levels from the best level “not at all” (coded 1) to the worst level “very much” (coded 4) (see Table 1 for entire health state classification system). For example a health state with “very much” problems in physical and role functioning and “no problems” on other QLU-C10D domains would be coded 4411111111. The combination of domain and level therefore is able to describe a total of 410 = 1,048,576 unique health states. These are the health states for which preferences need to be obtained in the valuation using the DCE.
The DCE asks respondents to choose between pairs of (hypothetical) health states which are described by 11 attributes: the 10 domains of the QLU-C10D (in a randomised order across participants to control for any potential dimension ordering effect) and a survival time of 1, 2, 5, or 10 years. These durations were selected to be plausible to most respondents, with enough spread to ensure discrimination between them. Each respondent is presented with 16 binary choice sets randomly selected from a choice of 960 sets. Only five attributes differ between the health states in each choice set to minimise the cognitive burden. An example choice set as presented to respondents is shown in Fig. 1 for details on the DCE design please refer to King et al. (2018) [9].
As with previous EORTC QLU-C10D valuations in other countries, recruitment and survey administration were performed web-based by survey engine (www.surveyengine.com), a survey company specialising in choice experiments. The survey was sent out as a weblink for the respondents to complete at their leisure. The approached potential respondents were members of an online panel of persons willing to complete surveys for a small payment. Survey Engine and its panel providers comply with the International Code on Market, Opinion and Social Research and Data Analytics (www.esomar.org).
In each country, we aimed to recruit 1000 respondents from the general population, aged between 18 and 80. Quota sampling by age and sex was applied to ensure that these variables were representative. The representativeness of educational level, marital status, and chronic disease (yes/no) were checked a posteriori by comparison with national census data. Data collection for all countries were performed in the years 2016–2017.
For the present study, validated translations of all required questionnaires were available. Also the entire Austrian survey was already available in German (see [11]). With regard to the QLU-C10D health state description system attribute descriptions were already available in all languages as they were taken from the parent instrument QLQ-C30. The respective questions are in past tense and were changed into a statement in the present tense (“Did you feel tired?” to “You feel tired.”). This and the translation of the remaining survey text (section headings and brief section summaries, DCE task descriptions, thank you notes) was contracted to translators, forward and backward translations were performed including in-country persons and pilot testing in convenience samples of 3–5 persons were conducted.
It has to be noted that for Austria, a revised German response format of the QLQ-C30 was used which has also been used for QLU-C10D valuations in Germany [11]. The reason for revision was that the original German wording for the category “quite a bit” (“mäßig”) is suspected to express a lower severity than the English version [18] and a revised German wording for this response level (“ziemlich”) is currently being investigated within the EORTC QLG [19]. The new translation appears to be a closer approximation of the severity level expressed by “quite a bit” (personal communication with study PI) but results are not yet published. The health states for QLU-C10D valuations for Austria are already based on the adapted German version, and consequently the utility weights presented here for Austria are valid for this version, which is abbreviated as “QLU-C10D Austria V2”.
Utilities score across countries were descriptively compared across a selection of QLU-C10D health states covering a continuum between best (i.e. 1111111111) and worst (i.e. 4444444444).
Statistical methods
Representativeness and feedback
Comparisons of socio-demographic and clinical characteristics with national census data [20,21,22,23,24,25] were performed by Chi-square tests. Feedback questions were analysed by descriptive statistical methods.
Utility estimation
Country-specific utility weights for the QLU-C10D were determined by conditional logistic regression using the method proposed by Bansback et al. (2012) [26]. The basic model for the utility of option j (scenario A or B) in choice set s for respondent i is given by
where TIMEisj is the survival time presented in option j and X’isj is a set of dummy variables related to the levels of QOL dimensions in the corresponding health state. The errors εisj were assumed to be independent and identically Gumbel distributed. The parameters α (scalar) and β (vector) were estimated by conditional logistic regression. To allow for within-subject correlations across different choice sets, a random subject-level term was included in the model using generalised estimation equation (GEE) models with first-order autoregressive covariance structure and a logit link function; this procedure gave rise to almost identical results as the conditional logistic regression analysis approach with a clustered sandwich estimator used in a previous study, implemented using STATA for the Australian QLU-C10D valuation data [9]. For QOL domains in which coefficients for levels did not show a monotonically increasing pattern with increasing severity levels, non-monotonic levels were combined; this is a common approach [3, 9]. All adjustments were conducted at once based on the raw coefficients; we checked the new results for potential non-monotonicities, but none were left. GEE model coefficients were then converted into utility decrements consisting of the ratio of the health state parameters b and the time coefficient a to reflect the trade-off between health-related QOL and length of life [26].
Statistical analyses were run using SPSS v24 and Stata v13.
Power considerations
Sample size determination was based on the confidence interval (CI) for the estimated utility decrements. Building on the findings of King et al. (2018) [9] and allowing for the possibility of a slightly larger spread due to a more heterogeneous response pattern (factor 1.2), the half-length d of the 95% CIs for the utility decrements for samples of size N = 1,000 was estimated to be < 0.05 ([u – d, u + d] with d ≤ 0.05. This sample size is towards the higher end of the spectrum of sample sizes used so far in DCEs [27].
Results
Sample characteristics
Complete cases and dropouts
An N of 1000 was reached in each country within a period of 2 months. Figure 2 shows the flow diagram of respondents who entered the survey and the number of dropouts in each section.
Socio-demographic and clinical variables, representativeness, and feedback
An overview of the distribution of socio-demographic and clinical variables in the valuation samples is given in Table 2. The proportion of respondents with a high educational level was significantly larger in the valuation sample compared to census data (p < 0.01, χ2 > 6.7). In all countries the majority of the respondents regarded the presentation of the DCE as clear/very clear (70% Austria, 73% Italy, 58% Poland), indifferent ratings were more frequent in polish respondents (29% vs 17% in Austria and 18% in Italy) and the percentages of those considering it unclear were very similar between 9 and 13%. Up to half of the respondents with (50% Austria, 36% Italy, 36% Poland) considered it difficult to choose between the health states and 26%—31% found it to be easy. Details of the feedback are provided in Figure A1 (Online Resource 1).
Utility estimates for QLU-C10D Austria V2, Italy, and Poland
Decrements were largely monotonic within each QOL dimension, i.e. a higher impairment level was associated with a higher utility decrement. Any movement away from the response category “not at all” was associated with negative utility except for social functioning in Austria and Poland and emotional functioning in Austria and Italy. Non-monotonicity was observed in three domains: lack of appetite (all countries), fatigue (Poland, Italy), and sleep disturbances (Italy) but none was statistically significant. For final utility scoring the values have been monotonicity-adjusted and are provided in Table 3 for all countries. Table A2 (Online Resource 2) provides the unadjusted model raw scores.
The largest decrements in Austria were found for physical functioning, followed by pain and role functioning. Among the cancer-specific symptoms, nausea received the highest decrement followed by bowel problems. The worst possible health state is − 0.111.
In Italy, the largest decrements were likewise found for physical functioning, then pain and role functioning, very closely followed by emotional functioning. The largest cancer-specific decrements were found for nausea and fatigue. The worst possible health state is 0.025.
In Poland, the highest decrements were again found for physical functioning, then role functioning, followed by pain; and the highest cancer-specific decrements were nausea and bowel problems. The worst possible health state is 0.048.
To get an overall impression of differences between countries on the utility level we compared index scores across a selection of unique QLU-C10D health states including best (i.e. 1111111111) and worst (i.e. 4444444444) health, some states with some mild and moderate impairments (1112211111, 3321111112, 2221122311, 3132123123) and some severe impairment (3332221144, 4444433211). It can be seen in Fig. 3 that utilities vary between countries for moderately and highly impaired health states and that for this spectrum of continuum Austrian utilities seem systematically lower.
QLU-C10D utility calculation for Austria, Italy, and Poland
For the calculation of QLU-C10D utility scores responses to the respective QLQ-C30 responses are converted into QLU-C10D levels (see Table 1) and attached with the monotonicity-adjusted decrements presented in Table 3 and Fig. 4. The decrements for each level on each domain are subtracted from 1 to obtain the final utility score. For instance, a health state with very much problems with Role Functioning (level 4), moderate problems with Social Functioning (level 3), a little Fatigue (level 2), and no problems on other dimensions (level 1) would be coded 1431112111 and result in a utility score of 1-(0.138 + 0.072 + 0.028) = 0.762 in Austria, a utility score of 1-(0.119 + 0.041 + 0.013) = 0.853 in Italy, and a utility score of 1-(0.196 + 0.008 + 0.012) = 0.784 in Poland.
Tables A3-A5 (Online Resources 3–5) provides an SPSS syntax code to implement the scoring.
Discussion
The major advantage of the EORTC QLU-C10D is that it is based on the EORTC QLQ-C30, and therefore, cancer-specific utilities can be determined using data previously or prospectively collected with the QLQ-C30 in addition to its traditional QOL profile scoring.
The current study provides value sets for Austria, Italy, and Poland. In all three countries, respective guidelines consider QALYs to be one of the preferred outcome measures in economic evaluations [28]. Normally, generic instruments are used to obtain utilities for QALY calculation as a result of conceptual considerations; however, disease-specific measures can be more sensitive to clinical differences in the respective diseases [5]. Whether this assumption holds true for the QLU-C10D requires clinical validity evaluation. An indication for the potential relevance of cancer-specific symptoms are the decrements found for nausea, bowel problems and fatigue which are consistent with the Australian QLU-C10D valuation [9] as well as those in Germany, the UK [12], and Canada [10].
In overall, we found that the impact of some QOL dimensions on QLU-C10D utilities appeared to differ across countries. This was especially true for emotional functioning, for which decrements were clearly higher in Italy than in Austria and Poland. Austrian utilities tended to be systematically lower in moderately and severely impaired health states.
Possible explanations of observed differences between countries may include different health care systems or culture-specific attitudes towards health, which could impact the willingness to trade-off life time for QOL. A possible methodological cause may arise from slight differences in meaning through translation into different languages. Although the EORTC follows a rigorous translation procedures, there is some tangential evidence for differential item function (DIF) analyses conducted by Scott et al. [18, 29, 30], who found that some QLQ-C30 items functioned slightly differently in a range of countries compared to the original English version. Region-related differences in how items function have also been found in other utility instruments, such as the EQ-5D [31, 32] and the SF-36 [33]. If utility differences do arise from differences in meaning as a result of translation, then they may very well disappear when using country-specific weights on the respective national data, which would be subject to the same translation effect. In fact, combined evidence of investigations by Scott et al. do suggest an important role of the lack of translation equivalence but also cultural DIF cannot be excluded. Further investigation on these issues is warranted, especially on the relative contribution of translation versus real differences in culture-specific attitudes towards health. Although these are complex topics to research, they are the key to truly understanding the inter-country differences we also have observed in the valuations presented here. A standardised and evaluated QLU-C10D valuation methodology is being used we will in future be able study utility differences between countries in a more sophisticated way.
A potential limitation of our study is that levels of education in the samples were slightly higher than in the respective general populations. The same was observed in the Australian valuation study [9] and is typical for online panels [34]. However, this would only be a problem if health valuation differed by education level. There is evidence that education level does not affect health valuation in different time trade of tasks [35, 36], however, this has not yet been investigated for DCEs. We intend to explore this with our data, but that is beyond the scope of the current paper.
The results from debriefing questions at the end of the valuation surveys indicated that clarity was not an issue in the vast majority of respondents. Task difficulty ratings do not raise severe concerns but require more caution in interpretation. If DCE tasks are too difficult or too easy they might be countering the required trade-off. The literature on the perceived difficulty of making decisions in health DCEs is somewhat scarce. The numbers we found compare well to the results from the QLU-C10D feasibility study [14] and are well within the range of what has been reported and considered acceptable in the literature so far. Mulhern et al. 2016 directly compared a DCE with a time-trade-off (TTO) for the EQ-5D-5L resulting in 57% considering the DCE tasks difficult to answer and 63% considering the TTO tasks difficult to answer [37]. In a study by Norman et al. (2013), a much lower number of 11% of respondents rated tasks of a DCE for the valuation of EQ-5D-5L to be either difficult or very difficult [38]. Other examples of DCEs in the context of health are Skedgel et al. (2013) who investigated societal preferences for the allocation of health care resources an found 65% to rate the presented DCE questions somewhat or extremely difficult to answer [39], and Green and Gerard (2009), likewise a societal DCE, where as many as 68% considered it fairly difficult or very difficult to complete the DCE tasks [40].
We conclude that the QLU-C10D enables the incorporation of QOL data collected via the QLQ-C30 into economic evaluation in Europe. This is especially important when QOL is a significant outcome of an investigated health intervention. Based on our results, we advise the use of country-specific QLU-C10D value sets for the evaluation of treatment effects whenever possible. In line with a recent suggestion recently also made for the EQ-5D [41], we advocate further investigation and discussion of the compatibility of translations and value sets, especially when used in multinational clinical studies. Future research will show how QLU-C10D cancer-specific utility values compare to generic ones in terms of sensitivity and responsiveness to clinical differences, and whether the choice of instrument will impact cost-utility ratios.
References
Dolan, P., et al. (1996). The time trade-off method: results from a general population study. Health Economics, 5(2), 141–154.
Herdman, M., et al. (2011). Development and preliminary testing of the new five-level version of EQ-5D (EQ-5D-5L). Quality of Life Research, 20(10), 1727–1736.
Brazier, J., Roberts, J., & Deverill, M. (2002). The estimation of a preference-based measure of health from the SF-36. J Health Econ, 21(2), 271–292.
Brazier, J. E., et al. (2012). Developing and testing methods for deriving preference-based measures of health from condition-specific measures (and other patient-based measures of outcome). Health Technology Assessment, 16(32), 1–114.
EUnetHTA. EUnetHTA JA1 WP5. Endpoints used for relative effe ctiveness assessment of pharmaceuticals. Health-related quality of life and ut ility measures. 2013 24.06.2019]; Available from: https://www.eunethta.eu/wp-content/uploads/2013/01/Health-related-quality-of-life.pdf.
King, M. T., et al. (2016). QLU-C10D: a health state classification system for a multi-attribute utility measure based on the EORTC QLQ-C30. Quality of Life Research, 25(3), 625–636.
Aaronson, N. K., et al. (1993). The European Organization for Research and Treatment of Cancer QLQ-C30: a quality-of-life instrument for use in international clinical trials in oncology. Journal of the National Cancer Institute, 85(5), 365–376.
Smith, A. B., et al. (2014). Reporting of health-related quality of life (HRQOL) data in oncology trials: a comparison of the European Organization for Research and Treatment of Cancer Quality of Life (EORTC QLQ-C30) and the Functional Assessment of Cancer Therapy-General (FACT-G). Quality of Life Research, 23(3), 971–976.
King, M. T., et al. (2018). Australian Utility Weights for the EORTC QLU-C10D, a Multi-Attribute Utility Instrument Derived from the Cancer-Specific Quality of Life Questionnaire, EORTC QLQ-C30. Pharmacoeconomics, 36(2), 225–238.
McTaggart-Cowan, H., et al. (2019). The EORTC QLU-C10D: The Canadian Valuation Study and Algorithm to Derive Cancer-Specific Utilities From the EORTC QLQ-C30. MDM Policy Pract, 4(1), 2381468319842532.
Kemmler, G., et al., German value sets for the EORTC QLU-C10D, a cancer-specific utility instrument based on the EORTC QLQ-C30 Quality of Life Research, (accepted August 2019).
Norman, R., et al., U.K. utility weights for the EORTC QLU-C10D. Health Econ, 2019.
Kessler, R. C., et al. (2002). Short screening scales to monitor population prevalences and trends in non-specific psychological distress. Psychological Medicine, 32(6), 959–976.
Norman, R., et al. (2016). Using a discrete choice experiment to value the QLU-C10D: feasibility and sensitivity to presentation format. Quality of Life Research, 25(3), 637–649.
Norman, R., et al. (2016). Order of Presentation of Dimensions Does Not Systematically Bias Utility Weights from a Discrete Choice Experiment. Value Health, 19(8), 1033–1038.
Gamper, E. M., et al. (2018). Test-Retest Reliability of Discrete Choice Experiment for Valuations of QLU-C10D Health States. Value Health, 21(8), 958–966.
Aaronson, N. K. (1993). Assessment of quality of life and benefits from adjuvant therapies in breast cancer. Recent Results in Cancer Research, 127, 201–210.
Scott, N. W., et al. (2013). An evaluation of the response category translations of the EORTC QLQ-C30 questionnaire. Quality of Life Research, 22(6), 1483–1490.
Deutsches Register klinischer Studien. Untersuchung der deutschsprachigen Antwortskala des Fragebogens zur Lebensqualität der European Organisation for Research and Treatment of Cancer (EORTC QLQ-C30) – ein Drei-Stufen Ansatz. 2017 August 21, 2018]; Available from: https://www.drks.de/drks_web/navigate.do?navigationId=trial.HTML&TRIAL_ID=DRKS00012759.
Bevölkerungspyramide Deutschland. Available from: https://service.destatis.de/bevoelkerungspyramide/#
Statistik Austria. (retrieved 23/01/2018)]; Available from: https://www.statistik.at/web_de/statistiken/menschen_und_gesellschaft/bevoelkerung/index.html.
Istat. retrieved 07/2017]; Available from: https://demo.istat.it/pop2017/index_e.html.
Index Mundi. Available from: https://www.indexmundi.com/poland/age_structure.html.
Statistics Poland [cited 2018; Available from: https://stat.gov.pl/en/topics/population/population/structure-of-the-population-by-2016,7,1.html.
Eurostat. [cited 2018; Available from: https://appsso.eurostat.ec.europa.eu/nui/submitViewTableAction.do.
Bansback, N., et al. (2012). Using a discrete choice experiment to estimate health state utility values. J Health Econ, 31(1), 306–318.
Mulhern, B., et al. (2019). One Method, Many Methodological Choices: A Structured Review of Discrete-Choice Experiments for Health State Valuation. Pharmacoeconomics, 37(1), 29–43.
EUnetHTA. EUnetHTA methodological guideline – Methods for health economic evaluations. 2015 24.06.2019]; Available from: https://www.eunethta.eu/wp-content/uploads/2018/01/SAG-_Public_consultation_table-with-comments-and-answers_ECO-GL_final.pdf.
Scott, N. W., et al. (2006). Comparing translations of the EORTC QLQ-C30 using differential item functioning analyses. Quality of Life Research, 15(6), 1103–1115.
Scott, N. W., et al. (2007). The use of differential item functioning analyses to identify cultural differences in responses to the EORTC QLQ-C30. Quality of Life Research, 16(1), 115–129.
Whynes, D. K., et al. (2013). Testing for differential item functioning within the EQ-5D. Medical Decision Making, 33(2), 252–260.
Salomon, J. A., et al. (2011). Comparability of patient-reported health status: multicountry analysis of EQ-5D responses in patients with type 2 diabetes. Medical Care, 49(10), 962–970.
Bath, P. M., et al. (2001). Tinzaparin in acute ischaemic stroke (TAIST): a randomised aspirin-controlled trial. Lancet, 358(9283), 702–710.
Hays, R. D., Liu, H., & Kapteyn, A. (2015). Use of Internet panels to conduct surveys. Behavior Research Methods, 47(3), 685–690.
Yang, Z., et al. (2017). Logical inconsistencies in time trade-off valuation of EQ-5D-5L health states: Whose fault is it? PLoS ONE, 12(9), e0184883.
Jin, X., et al. (2016). Is bad living better than good death? Impact of demographic and cultural factors on health state preference. Quality of Life Research, 25(4), 979–986.
Mulhern, B., et al. (2016). Valuing Health Using Time Trade-Off and Discrete Choice Experiment Methods: Does Dimension Order Impact on Health State Values? Value Health, 19(2), 210–217.
Norman, R., Cronin, P., & Viney, R. (2013). A pilot discrete choice experiment to explore preferences for EQ-5D-5L health states. Appl Health Econ Health Policy, 11(3), 287–298.
Skedgel, C. D., Wailoo, A. J., & Akehurst, R. L. (2015). Choosing vs allocating: discrete choice experiments and constant-sum paired comparisons for the elicitation of societal preferences. Health Expectations, 18(5), 1227–1240.
Green, C., & Gerard, K. (2009). Exploring the social value of health-care interventions: a stated preference discrete choice experiment. Health Economics, 18(8), 951–976.
Gerlinger, C., et al. (2019). Comparing the EQ-5D-5L utility index based on value sets of different countries: impact on the interpretation of clinical study results. BMC Res Notes, 12(1), 18.
Acknowledgements
Open access funding provided by University of Innsbruck and Medical University of Innsbruck.
Funding
The project was funded by the European Organisation for Research and Treatment of Cancer (Grant No. 002/2014).
Author information
Authors and Affiliations
Consortia
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no conflict of interest.
Ethical approval
All procedures performed in studies involving human participants were in accordance with the ethical standards of the institutional and/or national research committee and with the 1964 Helsinki declaration and its later amendments or comparable ethical standards.
Informed consent
Informed consent was obtained from all individual participants included in the study.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Electronic supplementary material
Below is the link to the electronic supplementary material.
11136_2020_2536_MOESM1_ESM.pdf
Online Resource 1 Fig. A1: Results of Discrete Choice Experiment (DCE) feedback questions in percentages Supplementary file1 (PDF 37 kb)
11136_2020_2536_MOESM2_ESM.docx
Online Resource 2 Table A2: Unadjusted utility model raw scores for Austria, Italy, and Poland Supplementary file2 (DOCX 19 kb)
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Gamper, E.M., King, M.T., Norman, R. et al. EORTC QLU-C10D value sets for Austria, Italy, and Poland. Qual Life Res 29, 2485–2495 (2020). https://doi.org/10.1007/s11136-020-02536-z
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11136-020-02536-z