Abstract
Cold-adapted esterases have potential industrial applications. To fulfil the global continuous demand for these enzymes, a cold-adapted esterase member of family VI from Lysinibacillus sp. YS11 was cloned on pET-28b (+) vector and expressed in E. coli BL21(DE3) Rosetta cells for the first time. The open reading frame (654 bp: GenBank MT120818.1) encodes a polypeptide (designated EstRag: 217 amino acid residues). EstRag amino acid sequence has conserved esterase signature motifs: pentapeptide (GFSQG) and catalytic triad Ser110-Asp163-His194. EstRag 3D predicted model, built with LOMETS3 program, showed closest structural similarity to PDB 1AUO_A (esterase: Pseudomonas fluorescens); TM-align score program inferences. Purified EstRag to 9.28-fold, using Ni2+affinity agarose matrix, showed a single protein band (25 kDa) on SDS-PAGE, Km (0.031 mM) and Kcat/Km (657.7 s−1 mM−1) on p-NP-C2. Temperature and pH optima of EstRag were 35 °C and 8.0, respectively. EstRag was fully stable at 5–30 °C for 120 min and at pH(s) 8.0–10.0 after 24 h. EstRag activity (391.46 ± 0.009%) was impressively enhanced after 30 min preincubation with 5 mM Cu2+. EstRag retained full stability after 30 min pre-incubation with 0.1%(v/v) SDS, Triton X-100, and Tween-80. EstRag promising characteristics motivate performing guided evolution and industrial applications prospective studies.
Similar content being viewed by others
Avoid common mistakes on your manuscript.
Introduction
As one of the global major commercial and industrial enzymes, esterases (EC 3.1.1.1) and lipases (EC 3.1.1.3) are a family of hydrolases that are responsible for the hydrolysis and synthesis of acylglycerols (Anthonsen et al. 1995). They share several structural features and reaction processes, including as the α/β-hydrolase fold, the conserved catalytic triad (Ser-Asp/Glu-His), and the pentapeptide motif (G/A-X-S-X-G) (Arpigny and Jaeger 1999). Esterases favor short-chain substrates and follow conventional Michaelis–Menten law in terms of substrate specificity and kinetics (Chahiniana and Sarda 2009). Lipolytic enzymes have been widely used as industrial catalysts in chemical, pharmaceutical, cosmetics, food industry, laundry detergents, and environmental remediation due to their efficiency and some characteristics such as chemio-regio-selectivity, enantio-selectivity, cofactor independence and a wide substrate spectrum (Luisa Tutino et al. 2009; Kim et al. 2015; Romano et al. 2015).
Lipolytic enzymes maintain high level of activity even when subjected to extreme temperatures, pH, detergents or organic solvents, rendering them appropriate for use in harsh industrial practices (Luisa Tutino et al. 2009; Ma et al. 2013). Sustaining activity at low temperatures necessitates structural flexibility that allows substrates to be accommodated under these conditions (Marx et al. 2007). Cold-adapted/active esterases with high catalytic efficiency at low temperatures (spanning from 4 to 40 °C) (Sarmiento et al. 2015a; Jiang et al. 2016; Noby et al. 2018) are getting prominence due to their potential applications in food manufacturing, biocatalysts for the generation of temperature-labile products, pollution bioremediation in cold environments and rapid deactivation at mild temperatures (Cavicchioli et al. 2011) which in turn is very beneficial for energy savings (Joseph et al. 2007).
The review of literature has a plethora of reports addressing multitude of recombinant cold-active lipases/esterases from various species like Est11 from Psychrobacter pacificensi (Wu et al. 2015), EstHIJ from Bacillus halodurans (Noby et al. 2019), Est700 from B. licheniformis (Zhang et al. 2018), P7-4 esterase from Salinisphaera sp (Kim et al. 2011), EstPc from Psychrobacter cryohalolentis K5T (Novototskaya-Vlasova et al. 2012), EstDR4 from Deinococcus radiodurans (Zhang et al. 2021) and EstO from Pseudoalteromonas arctica (Khudary et al. 2010). Nonetheless, in order to meet the ever-increasing needs of global enzyme markets, lipases/esterases with unique catalytic properties and robust stability under harsh conditions are urgently required and worthy searching for.
The microbial screening approach is a straightforward approach for discovering novel robust esterases in extremophiles microorganisms (e.g., psychrophilic, psychrotolerant, alkalophilic, halophilic, and so on) that live in extreme environments (van Rossum et al. 2013; Sarmiento et al. 2015b). However, the inability to meet the nutritional needs of 99% of the microbial flora in any habitat, as well as low enzyme output from culturable extremophiles, are two important roadblocks to novel enzyme discovery. Researchers across the world can now use a sequence-based screening strategy to screen a large number of microbial genomes on account of the rapid advancement of bioinformatics technologies. Currently, the GenBank database contains a large number of fully or partially annotated whole genome sequences of various microbial species. As a result, the sequence-based screening method from the GenBank database is regarded as a potent, time-saving, and cost-effective tool for discovering novel enzymes from extremophile microbial genomes.
Lysinibacillus is a psychrotolerant (Rizvi et al. 2021) newly re-classified genus of Bacillus. Due to changes at the genetic level and in the composition of the peptidoglycan in their cell walls, which included lysine, advances in bacterial taxonomy studies led to this modification in classification (Ahmed et al. 2007). The genus Lysinibacillus has attracted attention in recent years due to its biotechnological potential in the control of human life-threatening insects (Ahsan and Shimizu 2021), production of important biomolecules/enzymes with industrial prospects (Mechri et al. 2017), and environmental bioremediation (e.g., detoxifying a variety of pollutants like heavy metals and petroleum) (Jinal et al. 2019).
Remarkably, at the time of writing this article, a search of the literature databases found that both native and recombinant esterases from Lysinibacillus spp. have not yet been investigated. This has addressed the urgent need to mine the Lysinibacillus genome extensively in order to uncover esterases with potentially robust characteristics. In the current study, mining the whole genome sequence (GenBank: NZ_CP026007.1) of Lysinibacillus sp., YS11 as a psychrotolerant bacterium yielded 32 hits (open reading frames encoding nucleotide sequences) of putative esterases. As a result, the unstudied Lysinibacillus esterases and the psychrotolerance character of Lysinibacillus necessitated the selection of one esterase hit (locus WP_103118438.1) at random from the genome sequence NZ_CP026007.1 of Lysinibacillus sp. YS11 for cloning and heterologous expression.
In the context of the above-mentioned, the goal of this study is to clone, express, and characterize a novel cold-adapted esterase from Lysinibacillus sp. YS11. To the best of the authors' knowledge, this is the first piece of research to address the cloning, expression, and characterization of esterase from Lysinibacillus sp.
Materials and methods
EstRag construct, bacterial strain cultivating conditions, vectors, and chemicals
An open reading frame (ORF) (654 bp and 217 amino acids) from Lysinibacillus sp. encoding a novel cold-adapted esterase (EstRag) was artificially synthesized by GenScript Biotech ® CO., USA. pET-28b ( +) was used as the expression vector. Whilst E. coli BL21 (DE3) Rosetta (Promega Co., USA) was utilized as the cloning and expression host in this study. Lauria-Bertani (LB) broth was used for the activation and growing purposes of E. coli (BL21) DE3 Rosetta strain with an agitation speed of 180 rpm, at 37 °C for overnight. Substrates (Sigma-Aldrich Co., St Louis, USA) used for the enzyme assay were p-nitrophenyl acetate (p-NP-C2), p-nitrophenyl butyrate (p-NP-C4), p-nitrophenyl caproate (p-NP-C6), p-nitrophenyl caprylate (p-NP-C8), and p-nitrophenyl laurate (p-NP-C12). Imidazole was purchased from Loba Chemie PVT, Mumbai, India. Isopropyl-β- D-1-thiogalactopyranoside (IPTG), protein ladder, and kanamycin were purchased from Bioline, USA.
Synthesis of recombinant plasmid pET-28a ( +)/EstRag
The ORF encoding the esterase gene from Lysinibacillus sp. YS11 was retrieved from GenBank. This ORF spanned from c2955726 to 2956379 nucleotides in the genome of Lysinibacillus sp. YS11 with the accession number NZ_CP026007.1.
The protein ID reference sequence for the esterase gene locus was WP_103118438.1. The retrieved nucleotide sequence of the esterase gene had a length of 650 bp. This nucleotide sequence encoding a novel cold adapted esterase (EstRag) was synthesized by GenScript Biotech®. Co., USA (U3326EL100 _4). The chemically synthesized esterase gene (654 bp) was cloned onto pET-28b ( +) through the restriction sites 5′Nco1/HindIII3′. The construct was nominated as pET-28b ( +)/EstRag.
Transformation of pET-28b ( +)/EstRag into E. coli BL21 (DE3) Rosetta
The recombinant construct pET-28b ( +)/EstRag was transformed into chemically competent E. coli BL21 (DE3) Rosetta cells as stated by a previously reported protocol (Maniatis 1989).
Recombinant EstRag expression in E. coli BL21 (DE3) Rosetta
The transformants E. coli BL21 (DE3) Rosetta cells carrying the construct pET-28b ( +)/EstRag were cultured in a 1L Erlenmeyer flask containing 200 mL of LB broth supplemented with kanamycin at a final concentration of 34 μg/mL Then, the culture was incubated at 37 °C with an agitation speed of 180 rpm until reaching an optical density of 0.6–0.8 at 600 nm. After that, 1 mM isopropyl -D-1-thiogalactopyranoside (IPTG) was added to the culture, and the culture was incubated for a further 18 h at room temperature (22 °C) and 180 rpm. After incubation, the induced cells were harvested by centrifugation at 6,000×g for 20 min at 4 °C and resuspended in 50 mM Tris–HCl buffer, pH 8.0. A previously described technique (Abady et al. 2021; Mahmoud et al. 2021) was applied to break down the induced cells. Concisely, the cell pellets were suspended in 4 mL of disruption buffer (50 mM Tris/HCl, pH 7.6; 50 mg/mL lysozyme, and 300 mM NaCl). Then, the mixture was incubated for 30 min at 37 °C with gentle shaking. Cell disruption was accomplished via sonication at 14,000 Hz (Fisher Brand TM Sound Enclosure, Thermo Fisher Scientific Co., USA) for five cycles of 25 s each, with a one-min pause on ice between the successive cycles. Cell debris was removed by centrifugation at 8400×g for 15 min at 4 °C. In new Eppendorf tubes, the soluble supernatant of the cell lysate was transferred and then preserved at − 20 °C until further analyses.
Purification of recombinant expressed EstRag
Purification of the recombinant expressed EstRag was carried out using a procedure that has been previously described with minor modifications (Mahmoud et al. 2021). In brief, the resultant soluble portion of cell lysate containing 100 mg of crude protein was loaded onto a 2 mL Ni2+ -NTA affinity matrix. Unbound proteins were stripped away from the column by washing it with equilibration buffer (50 mM phosphate buffer, pH 7.5, containing 10 mM imidazole) with five times the bed volume until the absorbance at 280 nm reached zero. After that, washing the column with elution buffer (50 mM phosphate buffer, pH 7.5, containing 500 mM imidazole) eluted the bound 6-His-tagged recombinant EstRag protein. Eluted fractions with protein content (as verified by absorbance at 280 nm) were pooled and dialyzed by means of a dialysis bag with a 10 kDa MW cut off. at 4 °C for 24 h against 50 mM phosphate buffer, pH 7.5 with 3 times buffer exchange. Dialyzed recombinant EstRag activity was assessed using p-NP-C2 as a substrate.
Protein content determination
The Bradford method (Bradford 1976) was used to determine the protein content of the crude soluble cell lysate and the purified fraction. Bovine serum albumin was used to develop a standard curve.
SDS-PAGE
The crude cell lysate and all purified protein fractions resulting from the purification process were subjected to 10% sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) using the Laemmli method (Laemmli 1970). The molecular weight of recombinant EstRag was anticipated using a protein ladder.
Recombinant EstRag esterase activity
As previously reported (Ma et al. 2015), enzyme activity was measured colorimetrically by estimating the quantity of released p-nitrophenol (p-NP) (from its absorbance at 410 nm) using p-NP-C2 as a substrate. A standard curve of p-NP was established to determine the extinction coefficient of p-NP. The reaction mixture (1 mL) contained p-nitrophenyl ester substrate at a final concentration of 0.5 mM, 50 mM Tris–HCl, pH 8.0, and recombinant purified EstRag unless otherwise mentioned. All enzyme assays were carried out in triplicate at room temperature unless otherwise stated. Under the indicated assay conditions, one unit of esterase activity is defined as the amount of enzyme that liberates one mol of p-nitrophenol per min.
Kinetic parameters and substrate specificity determination
The specific activity of purified recombinant EstRag was assessed using five p-nitrophenol esters (p-nitrophenyl acetate (p-NP-C2,), p-nitrophenyl butyrate (p-NP-C4), p-nitrophenyl caproate (p-NP-C6), ρ-nitrophenyl caprylate (p-NP-C8), and p-nitrophenyl laurate (p-NP-C12)) as the substrates.
The initial reaction velocities with various concentrations (0.0015–3.0 mM) of p-NPAC2 were measured and then fitted to the Lineweaver–Burk transformation of the Michaelis–Menten equation to calculate Km and Vmax using Hyper32 Software. The kcat was also determined using the equation: kcat = Vmax/[E], where [E] is the total amount of EstRag in the reaction mixture.
Biochemical characterization of recombinant purified EstRag
p-NPA was used as the substrate for all enzyme biochemical characterization assays. All reactions were carried out in triplicate. The values were provided as the mean of three replicates with standard error.
EstRag pH and temperature optima
The optimal pH was established across a wide pH range of 5.0–11.0: pH 5.0–6.0: 50 mM citrate buffer, pH 7.0: 50 mM phosphate buffer, pH 7.6–9.0: 50 mM Tris–HCl buffer, pH 10.0–11.0: 50 mM glycine–NaOH buffer. All enzyme assays using different buffers were conducted at room temperature. The optimal temperature was established at several temperatures ranging from 5 to 60 °C. The control reaction was the enzyme activity evaluated without any pretreatment.
Effect of temperature and pH on EstRag stability
The thermal stability of EstRag was investigated by measuring residual activity after incubating the enzyme at different temperatures (4.0–50 °C) in 50 mM Tris–HCl buffer, pH 8.0, at three-time intervals; 30, 60, and 90 min. After that, the reaction tubes were placed on ice for 5 min before performing enzymatic assays at an optimal temperature.
The influence of pH on EstRag stability was determined by incubating the enzyme at 4 °C overnight in the aforementioned buffers ranging from 5.0 to 10.0. Following the completion of the incubation period, enzyme assays were performed. At each pH, control reactions were carried out and residual activity was measured.
Effect of metal ions, detergents, organic solvents, sodium chloride and inhibitors on EstRag stability
The influence of different metal ions on EstRag stability was estimated by incubating the enzyme in the presence of different metal ions; Ca2+, Mg2+, Fe3+, Mn2+, Cu2+, Zn2+, Mo2+, and K+ using two concentrations of 5.0 and 10 mM for each metal ion. The stability of recombinant EstRag in the presence of detergents was evaluated by incubating the enzyme with Tween 20, Tween 80, Triton X-100, and SDS at two concentrations, 0.1 and 0.25% (v/v %) for 30 min at 25 °C in 50 mM Tris-HCl buffer, pH 8.0. The influence of polar and non-polar solvents on recombinant EstRag stability was estimated using 10 and 20% (v/v) solutions of dimethyl sulfoxide (DMSO), acetone, butanol, isopropanol, glycerol, methanol, ethanol, and hexane. The effect of NaCl on EstRag stability was assessed by using salt concentrations ranging from 0.5 to 4.0 M after preincubation of EstRag with each NaCl concentration for 30 min at room temperature. The impact of β-mercaptoethanol and ethylene diamine tetra acetic acid (EDTA) on EstRag stability was investigated at concentrations of 5 and 10 mM for each.
In all investigations, the purified EstRag was pre-incubated for 30 min at room temperature in 50 mM Tris-HCl, pH 8.0, containing the above-mentioned agents at the relevant concentration. All enzymatic assays were carried out following the end of the incubation time. An enzyme test without pre-treatment was used as a control reaction. Values are presented as the mean of three replicates with SE.
In silico EstRag sequence analyses
The N-terminal signal peptide of the EstRag amino acid sequence was predicted using the Signal IP 6.0 server (https://services.healthtech.dtu.dk/service.php?SignalP-6.0). The Expasy, Swiss Bioinformatics 13 Resource Portal (https://web.expasy.org/translate/) was used to obtain the translated protein amino acid sequence of EstRag. Using the BLASTN and BLASTP online programs, the nucleotide sequence of the EstRag gene and its translated protein amino acid sequence were searched against the non–redundant nucleotide collection database and UniProtKB/Swiss-Prot (Swissprot), respectively. The SAS server (https://www.ebi.ac.uk/thornton-srv/databases/sas/) was used to predict the secondary structure of the translated AXE-HAS10 protein. CLC Sequence Viewer 8.0 was used to align the EstRag amino acid sequence with that of other esterases from other species. The MEGA 11.0 software was used to build a phylogenetic tree portraying the evolutionary relationships of the aligned sequences. The selection of representative examples of esterases that would cover all available reported esterases (I-XIX) was considered according to the two classifications of esterases: Arpigny and Jaeger in 1999 (updated by Jaeger and Eggert in 2002, Hausmann and Jaeger (2010), and Kovacic et al. in 2019) and ESTHER database The online Local Meta-Threading Server (LOMETS3) located at the server (https://zhanggroup.org/LOMETS/) was used to predict the three-dimensional (3D) structure of the EstRag protein. TM-align (Quick & Accurate Structural Alignment) online program located at the server (TM-align: A protein structure alignment algorithm using a TM-score rotation matrix (zhanggroup.org) was used by LOMETS to match the first predicted 3D model to all structures in the PDB library. The predicted 3D structure model of EstRag was visualized by PyMOL (Schrödinger, LLC, Portland, OR). The online program ExPASy was used to estimate the theoretical isoelectric point (pI) and predicted MW of EstRag. Three programs were directed to predict the presence of transmembrane helices in the EstRag protein: TMHMM2.0 (https://services.healthtech.dtu.dk/service.php?TMHMM-2.0/). SOSUI (https://harrier.nagahama-i-bio.ac.jp/sosui/mobile/) and PHOBIUS (https://www.ebi.ac.uk/Tools/pfa/phobius).
Results
Cloning, expression, sequence analysis and phylogeny of EstRag
The full-length of esterase ORF (654 bp) from Lysinibacillus sp. YS11 reference sequence NZ_CP026007.1 of Lysinibacillus sp. YS11, with the protein ID: WP_103118438.1, was retrieved from GenBank and chemically synthesized by GenScript Co. The chemically synthesized esterase gene was cloned in pET-28b ( +) expression vector. The cloned esterase gene was successfully overexpressed in the E. coli BL21(DE3) Rosetta strain. The recombinantly expressed protein, which deduced 217 amino acid residues of the cloned esterase gene, was designated EstRag. The nucleotide sequence of the EstRag encoding gene was deposited in GenBank under the accession number MT120818.1. However, the translated amino acid sequence EstRag was given the protein ID: QIT07223.1. A BLASTp sequence similarity search against the non-redundant database revealed that the translated EstRag amino acid sequence had high similarity identities with esterases from Lysinibacillus sp.: 97.7% identity with WP_036076201.1 of L. boronitolerans, 95.85% identity with WP_205444398.1 of Lysinibacillus fusiformis, 93.09% identity with WP_054609366.1 of Lysinibacillus sp.ZYM-1, and 92.17% identity with WP_036127121.1 from Lysinibacillus sp. However, a BLASTp sequence similarity search against the Uniprot/Swiss-protein database and Protein Data Bank (PDB) revealed that EstRag had low similarity with the following carboxylesterases/thioesterases: 29.68% identity with Q53547.1 of Pseudomonas fluorescens, 29.55% identity with Q51758.1 of P. fluorescens, 26.94% identity with Q6CJK6.1 of Kluveromyces lactis NRRL-Y-1140, 23.61% identity with Q54T49.1 of Dictyostelium discoideum, 29.68% identity with 1AUO_A of P. fluorescens, 29.66% identity with 6BJE_A of Homosapiens, 28.98% identity with 2H1i_A of Bacillus cereus, 25.81% identity with 4H0C_A of Daydobacter fermentum, 25.23% identity with 3CN7 of P.aeruginosa, 24.02% identity with 4F21_A of Francisella tularensis, 23.56% identity with 4HFZ_A of Cereibacter sphaeroides, and 19.61% identity with 3DOH_A of Thermotoga maritima.
A neighbor-joining phylogenetic tree (Fig. 1) including 63 esterases and lipolytic enzymes covering the previously classified 19 families (I-XIX), was constructed by MEGA software 11.0 in order to classify EstRag in relation to those families. The analysis of the constructed phylogenetic tree greatly suggested that EstRag was closely related to family VI esterases according to the classification of Arpigny and Jaeger 1999 (updated by Jaeger and Eggert 2002, Hausmann and Jaeger (2010), and Kovacic et al. 2019). Meanwhile, Family VI of esterases in ESTHER database (Esther Home Page (inrae.fr), the corresponding classification scheme of esterases, is nominated LYsophospholipase_Carboxylesterase.
Multiple sequence alignment revealed that the typical catalytic triad of active site serine (Ser110) in the pentamotif G-X-S-X-G, conserved aspartic acid (Asp163), and histidine (His194) residue motif was localized in EstRag and some representative members of bacterial esterasses and lipases from family VI (Fig. 2). EstRag's consensus pentamotif (GFSQG) covered residues 108–112.
SignalP6.0 analysis evidenced that EstRag's amino acid sequence lacks both the cleavage site and the N-terminal signal peptide. EstRag protein was not a transmembrane protein, according to TMHMM2.0, SOSUI, and PHOBIUS analyses.
Structural modeling of EstRag
The secondary structure of EstRag (Fig. 3) was predicted by the SAS online program using the esterase of Pseudomonas fluorescens (PDB entry 1AUO_A). The topological features of EstRag depicted in Fig. 3 reveal that EstRag is a typical α/β-fold hydrolase with 9 β-sheets and 7 α-helical structures. The Ser110 residue is found after β6, Asp163 is after β8, and His194 is after β9.
The three-dimensional structure of EstRag was modeled by the LOMETS3 online program using 10 top templates, selected from 110 templates, identified by 11 threading alignment methods. Among the top ten templates, the template PDB entry 1fj2_A (human acyl protein thioesterase) gave the best sequence alignment with EstRag amino acid sequence, with a normalized Z-score of 4.39. As a rule of thumb, a Z-score of threading alignment ≥ 1 indicates good alignment. The predicted 3D structure model of EstRag was shown in Fig. 4A. The 3D model structure of EstRag exhibited a typical α/β hydrolase fold with 7 β-sheets and 6 α-helices. The TM-align structure alignment online program revealed that the 3D structural model of EstRag exhibited the closest structural similarity to the top ten PDB templates. The PDB entry 1AUO_A: esterase of P. fluorescens had the closest structural similarity to EstRag and the highest TM-score of the top ten PDB structural analogue templates (0.853). When compared to the remaining 9 top PDB structural analogues templates, the superimposed 3D model of EstRag with PDB entry 1AUO_A (Fig. 4B) exhibited the lowest root mean square deviation (RMSD) value (2.13). The amino acid residues representing the catalytic triad of Ser110, Asp163, and His194 (Fig. 4C) were indeed localized in close proximity. The catalytic serine residue (Ser110) was positioned on a nucleophilic elbow joining β3- strand and α4- helix within the core structure, whilst Asp163 and His194 were positioned on loops between β5-α6 and β6-α7, respectively as shown in Fig. 4D.
As deduced from the bioinformatic analysis at the ExPASy online server, EstRag has a predicted molecular mass of 24.5 kDa and a theoretical pI of 4.95, respectively. Besides, EstRag has 26 negatively charged residues (Asp + Glu) and 13 positively charged residues (Arg + Lys).
EstRag 3D model: structure validation and refinement
In order to validate the 3D structure model of EstRag, the initial model built by LOMETS and the refined 3D structure model built by 3D refine online program were evaluated by four estimates through the following online programs: SAVES 6.0 package (including three analyses PROCHECK, Verify 3D, and ERRAT) and PROSA. The results of these analyses were presented in supplementary fileS1 (Fig. 5)
Expression and purification of recombinant EstRag
EstRag was overexpressed in 1 mM IPTG induced recombinant E. coli BL21(DE3) Rosetta cells harboring the construct pET-28b ( +) /EstRag at room temperature after 18 h of induction at 180 rpm. The recombinant EstRag, expressed as a fusion tag with 6-His residues on its C-terminus, was purified to homogeneity with Ni2+-agarose affinity chromatography (Table 1) with specific activity, fold purification, and yield of 23.08, 6.08, and 39.37, respectively. The purified to homogeneity recombinant EstRag displayed a single protein band with a molecular weight of around 25.0 kDa (Fig. 6).
Biochemical characterization of recombinant EstRag
The purified EstRag displayed cognizable activity over a wide range of pH (s) from 5.0 to 12.0. Significant differences (P < 0.05) were evidenced among values of enzyme activity over the tested range of pH (s). The optimum pH for enzyme activity was realized at pH 8.0 (Fig. 7A). Pertaining to pH stability, the purified EstRag exhibited 100, 100, and 93.41% stability for 24 h at pH (s) 8.0, 9.0, and 10.0, respectively (Fig. 7B). EstRag stability decreased significantly (P < 0.05) at pH(s) less than 8.0 and greater than 10.0. Regarding the enzyme-temperature profile, an appreciable enzyme activity with significant differences at P < 0.05 was remarked over a wide range of temperatures (5–60 °C). Whereas the optimal activity was achieved at 35 °C (Fig. 7C). EstRag full activity (100%) was retained after 90 min of preincubation at temperatures ranging from 5 to 30 °C (Fig. 7D). However, a significant remarkable decrease in EstRag activity (36.78 and 23%) at P < 0.05 was noticed after 90 min of preincubation at 35 and 40 °C, respectively.
The profile of EstRag activity in the presence of some metal ions and inhibitors was displayed in Table 2. EstRag activity was significantly enhanced (160.46 ± 0.023 and 391.46 ± 0.009%) at P < 0.05 after 30 min of preincubation with 5 mM Ca2+and Cu2+, respectively (Table 2). After 30 min of preincubation with 5 mM Zn2+, K2+, and Mo2+ separately, EstRag activity decreased significantly (42.883 ± 0.006, 68.71 ± 0.014, and 79.04 ± 0.03%) at P < 0.05. Full EstRag activity (100%) was retained after 30 min of preincubation with 5 and 10 mM of Mg2+. Preincubation of EstRag with EDTA at 5 and 10 mM for 30 min resulted in significantly enhanced activity of 196 ± 0.026 and 206.74 ± 0.033%, respectively (Table 2). Similarly, after 30 min of preincubation at 5 and 10 mM of β-mercaptoethanol, a significant stimulatory effect on EstRag activity (252.55 ± 0.006 and 225.11 ± 0.053%) was observed (Table 2).
EstRag activity-profile in the presence of some organic solvents and detergents was shown in Table 3. Preincubation of EstRag with 20%(v/v) glycerol and 10%(v/v) diethyl ether for 30 min separately did not exhibit either significant stimulatory or inhibitory effect on enzyme activity. A significant and remarkable decline in EstRag activity (38.91 ± 0.004, 4.29 ± 0.014, 19.25 ± 0.007, and 19.28 ± 0.029%) at P < 0.05 was recorded after preincubation for 30 min with 10% (v/v) of ethanol, acetone, isopropanol, and N-butanol, respectively. A significant stimulatory effect at P < 0.05 on EstRag activity (121.71 ± 0.032%) was stated after 30 min preincubation with 20%(v/v) DMSO. For hexane and methanol at 20%(v/v) each, a slight significant decrease in EstRag activity (94.21 ± 0.049 and 89.22 ± 0.011%) at P < 0.05 was observed, respectively.
Estrag activity was fully maintained (100%) after 30 min of preincubation with 0.1 and 0.25% (v/v) SDS (Table 3). However, around 94% of EstRag activity was retained after 30 min of preincubation with 0.1 and 0.25% (v/v) Triton X-100. Conversely, a significant and remarkable decrease in EstRag activity (55.94 ± 0.034%) at P < 0.05 was observed after 30 min of preincubation with 0.25%(v/v) Tween-80.
The effect of NaCl on EstRag activity was demonstrated in Fig. 8. EstRag activity (80 ± 0.019, 70 ± 0.037, and 70 ± 0.02%) was retained after 30 min preincubation with 1.5, 2, and 2.5 M NaCl, respectively. However, higher concentrations of NaCl above 2.5 M to 4 M resulted in a significant decline in EstRag activity (~ 50 ± 0.033).
The kinetic parameters for hydrolysis of the ultimate easily hydrolyzed substrate (p-NP-C2) by EstRag were presented in Table 4 and Fig S5. EstRag exhibited substrate affinity (Km), catalytic turnover (Kcat) and catalytic efficiency (Kcat/Km) of 0.031 mM, 20.39 s−1 and 657.7 s−1. mM−1 (Table 4), respectively on p-NP-C2, deduced from Lineweaver–Burk plot (Fig S5).
As displayed in Table 4, the favorable substrate specificity of EstRag towards p-NP esters of varied lengths (C2-C12) was investigated. The maximum enzyme activity was perceived in the presence of p-NP-C2. The maintained enzyme activity on p-NP-C4 and p-NP-C6 was 25.77 and 18.99%, respectively, when compared to enzyme activity on p-NP-C2 (set as 100%). No enzyme activity could be detected upon using p-NP-C8 and p-NP-C12 as substrates.
Discussion
Lipases/esterases are the most significant biocatalysts for industrial applications. There is a growing demand for such enzymes with unique features (e.g., cold-adeptness, detergent stability, organic solvents stability, metal ions stability, etc.) to fit into the rigorous industrial processes with harsh conditions (Romano et al. 2015). In this study, the entire ORF (654 bp) encoding cold- adapted esterase EstRag (217 amino acids) (locus WP_103118438.1 from Lysinibacillus sp. YS11 genome sequence NZ_CP026007.1) was selected at random, cloned, heterologously expressed in E. coli, and biochemically described. EstRag has a typical α/ß hydrolase fold as depicted in the 3D structural model. EstRag's amino acid sequence phylogeny (Fig. 1) showed that it belongs to the esterase/lipase family VI. Currently, all known esterases/lipases members are categorized into 19 families (I-XIX) based on their amino acid sequences and enzyme characteristics, according to the Arpigany and Jaeger taxonomy (Arpigny and Jaeger 1999). The classification of esterases/lipases by Arpigany and Jaeger was updated by Jaeger and Eggert 2002, Hausmann and Jaeger (2010), Kovacic et al. (2019). According to the ESTHER database's corresponding classification of etserases/lipases, family VI is designated as lysophospholipase carboxylesterase (ESTHER family). Phospholipases and carboxylesterases in this class have broad substrate specificity. Members of family VI exhibit up to 40% sequence similarity with eukaryotic lysophospholipases. BLASTP sequence similarity against the protein data bank (PDB) found that EstRag and 6BJE A (Lysophospholipases of Homo sapiens) share 29.66 percent identity. Based on multiple alignments with esterases received from the PDB database, LOMETS MODELLER chose the PDB entry 1fj2_A (human acyl protein thioesterase) as the best template with the most sequence similarity. The physiological activities of bacterial family VI esterases are still unknown. It is recognized, however, for human acyl-protein thioesterase I, which shares significant sequence and structural similarities with esterases from the family VI. The in vivo functionality of acyl protein thioesterases is S-palmitoylation of cysteine residues in G protein alpha subunits I (Pesaresi and Lamba 2005; Caswell et al. 2022). EstRag's structural and sequence similarities to the PDB template entry 1AUO of P. fluorescens, a member of family VI, were determined using TM-align and SAS online programs. EstRag’s multiple sequence alignment with other members of esterase family VI suggested the catalytic triad of EstRag at Ser110-Asp163-His194. Similarly, the crystal structure of esterase of P. fluorescens (PDB entry 1AUO) (Kim et al. 1997) and the crystal structure of esterase of human acyl thioesterase I (PDB entry 1fj2_A) (Devedjiev et al. 2000) confirmed the catalytic triad localized at Ser114-Asp168-His199 and Ser114-Asp168-His199, respectively. According to the ESTHER database, there are 27 esterase members of family VI (LYsophospholipase_Carboxylesterase) whose 3D structure has been established experimentally and deposited in the PDB. PDB entries for family VI esterases belong to P. aeruginosa, P. fluorescens, Agrobacterium tumefacien stran C58, Dyadobacter fermentans DSM 18053, Bacillus cereus, Homosapiens, Arabidopsis thialana, and Zea mays. However, the current number of protein sequences of LYsophospholipase_Carboxylesterase in protein databases is 335 hits form variable sources like bacteria, yeasts, plants, and Homo sapiens, according to the updates of ESTHER database.
Esterases classified in family VI are small proteins ranging from 23 to 26 kDa.The experimental and theoretical EstRag’s molecular weight (around 25 kDa) were in good agreement and harmony with corresponding members of family VI esterases.
EstRag's maximum activity was found at 35 °C, with roughly 37 and 15% of its activity persisting at 20 and 5 °C, respectively (Fig. 7C), indicating its cold-adaptive property. (Santiago et al. 2016). Although EstRag was thermally unstable at temperatures higher than 35 °C, it lost most of its activity after 90 min of incubation (Fig. 7D). These characteristics make EstRag a perfect biocatalyst for application in low temperature processes, contributing not only to energy savings but also to the protection of heat-labile medicinal compounds (Joseph et al. 2007).
The thermal profile of EstRag was in accordance with the previously reported cold-adapted esterases, for instance, EstC (optimal activity at 35 °C and retention of 25% relative activity at 10 °C) (Brault et al. 2012), estHIJ from Bacillus halodurans (maximal activity at 30 °C and 15% relative activity at 4 °C, thermal unfolding at 50 °C) (Noby et al. 2019). EstK from Pseudomonas mondelii (maximal activity at 40 °C and thermal inactivation at 60 °C) (Hong et al. 2012), rEst97 (highest activity at 35 °C, 25% retained activity after 15 min at 35 °C) (Fu et al. 2013). Cold-lipolytic enzymes, on the other hand, are a valuable resource for unravelling the cold adaptation process of psychrophilic proteins (Siddiqui and Cavicchioli 2006; Kube et al. 2013). Cold-active enzymes, on the whole, have a high catalytic efficiency, although they have limited thermal stability. In most situations, the adaptation to cold is accomplished by a decrease in activation energy, which may result from greater flexibility of either a specific area or the entire protein structure. This increased suppleness appears to be caused by the psychrophilic enzymes' low temperature stability (D’Amico et al. 2002).
Thanks to recent developments in the clarification of the molecular properties of cold-adapted enzymes gained from X-ray crystallography, protein engineering, and biophysical approaches, the adaptation strategies have been recognized. Psychrophilic organisms and their enzymes have piqued the scientific community's interest due to their unique properties, which make them particularly useful in investigating the probable relationship between stability, flexibility, and specific activity, as well as worthy biotechnological tools (D’Amico et al. 2002).
EstRag has lower Gly and Met percentages (6.9 and 2.3%, respectively) than previously reported cold-adapted esterases such as estHIJ (7.6% Gly and 2.4% Met) [15] and rEst97 (13.1% Gly and 3.9% Met) [42]. The impact of these residues could be explained by native flexibility, which is linked to overall protein flexibility and high specific activity at low temperatures (Mavromatis et al. 2002; Fu et al. 2013). EstRag's lower Gly and Met content may explain its superior thermal stability (37% retained activity after 90 min at 35 °C) compared to rEst97 (25% retained activity after 15 min at 35 °C) (Fu et al. 2013). EstRag demonstrated substantially poorer thermostability than estHIJ (70% maintained activity after 6 h at 40 °C) (Noby et al. 2019), although having lower Gly and Met levels than estHIJ. This could be due to the presence of other variables, rather than Gly and Met content, influencing protein flexibility. When compared to their counterparts from mesophilic and thermophilic bacteria, psychrophilic enzymes have a lower Arg/Arg + Lys ratio and a higher Gly and Met content. More ionic interactions (such as salt bridges and hydrogen bonds) are produced by Arg, which contributes to structural rigidity. EstRag had a ratio of 0.357 in this setting, which was low relative to other cold-adaptive esterases previously identified. EstRag's poor thermostability (37% retained activity after 90 min at 35 °C) compared to EstSL3's (40% retained activity after 30 min at 55 °C) could be attributable to EstSL3's high Arg/Arg + Lys ratio (0.62) (Wang et al. 2016). On the other hand, a high Lys residue concentration contributes to protein structural flexibility (Khan and Sylte 2009).
The activity of cold-adapted enzymes at low temperatures could be attributed to the continuous mobility of the enzyme catalytic domains, which reduces activation energy (Noby et al. 2019). However, such flexibility makes the active site heat sensitive and therefore unable to conduct catalysis beyond a certain temperature that causes thermal inactivation (Marx et al. 2007; Barroca et al. 2017). In contrast to cold-adapted enzymes, the stiffness of the active site in their mesophilic and thermophilic counterparts allows them to maintain activity at higher temperatures (Marx et al. 2007). The mesophilic esterases PMGL2 (Petrovskaya et al. 2016) and Est06 (Dukunde et al. 2017), for example, have an optimal activity in the mesophilic range (45–50 °C). Variations in thermal stability could be ascribed to the ratio of flexible residues and their arrangement, whether localized around the active site or dispersed throughout the entire structure (Marx et al. 2007).
EstRag demonstrated considerable activity throughout a wide pH range from 7 to 10, with optimum activity at pH 8.0. (Fig. 7A). The present findings are in accordance with those of Est700 and Est11, which showed optimal activity at pH 8 and 7.5, respectively (Wu et al. 2013; Zhang et al. 2018) (Table 5). In comparison, the ideal Ph of other cold-adapted esterases ranges from 9.0 to 10.5 (LESUISSE et al. 1993; Kanjanavas et al. 2010; Cai et al. 2014; Gricajeva et al. 2016), which is higher than EstRag. Moreover, EstRag was stable over a Ph range from 7 to 10 with around 100% retained relative activity after 20 h of incubation (Fig. 7B), outperforming most reported esterases from other families, such as Alkalibacterium sp. EstSL3 (Wang et al. 2016) and Zunongwangia profunda EstLiu (Ganasen et al. 2016). The neutral to slight alkaline Ph optima for EstRag could be elucidated by the fact that the enzyme is most probably secreted in the cytoplasm internally, which has a lower Ph than the external environment (Krulwich et al. 1997). This localization was further confirmed by the absence of a signal peptide in EstRag and estHIJ [19]. EstRag’s appropriateness for working efficiently in extreme alkaline settings in industrial processes is influenced by alkaline Ph optima and stability.
The metal ions Zn2+ and Mn2+ were shown to severely inhibit EstRag activity. Zn2+ has been reported to strongly inhibit a variety of esterases, including estHIJ (Noby et al. 2019), EstF (Fu et al. 2011), Est97(Fu et al. 2013), EstA (Cieśliński et al. 2007) and EstC (Brault et al. 2012), but the common mechanism of Zn2+ inhibitory impact on esterases remains unknown and needs to be investigated in the future. Wherase EstRag activity significantly increased in the presence of Mg2+ and Ca2+ ions. The Ca2+ is generally thought to be required for lipase and esterase activation by strengthening protein structure and decreasing product inhibition (Guncheva and Zhiryakova 2011). Incredibly EstRag activity was greatly augmented four times fold its normal activity in the presence of copper which is a unique characteristic for EstRag. On the contrary, other cold- adapted esterases reported in the literature such as: EstDR4 (Zhang et al. 2021), EstN7 (Noby et al. 2018), Est11(Wu et al. 2015), P7-4 esterase (Kim et al. 2011), 643A esterase (Cieśliński et al. 2007) and EstPc (Novototskaya-Vlasova et al. 2012) were all strongly inhibited by the action of copper (Table 5). However, in the presence of Cu2+, some counterparts of esterases from mesophilic and thermophilic microorganisms showed either very slight inhibition (around 94% retained activity) or full resistance (100% retained activity), such as EstATII (Mohamed et al. 2013), LKE-028 (Kumar et al. 2012), EstR (Quyen et al. 2007), EstA (Chu et al. 2008) and EstEH112 (Oh et al. 2012). EstRag's significantly enhanced activity in the presence of Cu2+ is a unique property that has yet to be seen in other esterases. In a prospective investigation, the formation of the EstRag-Cu2+ complex should be explored in terms of the position and type of amino acids that contribute to this complex’s formation. In a future investigation, crystallizing EstRag in the presence of Cu2+ is strongly suggested. The amazing activity of significantly enhanced EstRag in presence of Cu2+ is an extraordinary property that would underpin its potential for bioremediation of oil contaminated water and soil with a high Cu2+ load.
Incredibly, the metal chelator EDTA showed a discernible stimulatory effect on EstRag activity, demonstrating that EstRag is not a metalloenzyme. Similarly, EstCS1 (Park et al. 2020), and Est2L/Est4L (Park et al. 2021) were reported as non-metalloesterases (no detectible inhibitory effect by EDTA at 10 mM). Likewise, β-mercaptoethanol significantly enhanced EstRag activity by 2.5 times fold at concentrations of 5 and 10 mM. On the other hand, β-mercaptoethanol showed neither inhibitory nor stimulatory effects on EstN7 (Noby et al. 2018), estHIJ (Noby et al. 2019) and esterase of Salimicrobium sp. LY19 (Xin and Hui-Ying 2013) enzyme activity (Table 5).
In the case of detergents, EstRag was obviously enhanced by 1.18 times its initial activity in the presence of SDS at a concentration of 0.25%. This might be attributed to the fact that SDS acts as an activator by enhancing substrate solubility, stabilizing enzyme conformation, improving the availability of substrates to the active core linked with the hydrophobic binding, and limiting protein aggregation (Guncheva and Zhiryakova 2011). Conversely, SDS had a strong inhibitory effect on EstN7, estHIJ, Est11, Est700 and EstPC (Novototskaya-Vlasova et al. 2012; Wu et al. 2015; Noby et al. 2018, 2019; Zhang et al. 2018) (Table 5). Additionally, EstRag retained more than 90% of its activity in the presence of Triton X-100 at both concentrations, which is in accordance with previously reported findings of EstN7 and estHIJ (Noby et al. 2018, 2019). EstRag's detergent stability is a promising attribute that would suggest its likely usage in the detergent industry.
EstRag remained either moderately stable or dramatically deactivated in non-polar hydrophobic liquids. Due to its moderate stability in non-polar hydrophobic organic solvents such as hexane and diethyl ether for 30 min at 10%(v/v), EstRag would be used in esterification and trans-esterification processes that are often carried out in low-water-content media utilizing non-polar solvents (Guncheva and Zhiryakova 2011). So far, several esterases with tolerance to organic solvents have been outlined, including Est11 (tolerant to glycerol, ethanol, DMSO, and isopropanol) (Wu et al. 2015), Est700 (tolerant to n-hexane, n-heptane, xylene, isopropanol, and ethanol) (Zhang et al. 2018) Estpc and (tolerant to DMSO and methanol) (Novototskaya-Vlasova et al. 2012). Significant EstRag inactivation in the presence of polar organic solvents, such as ethanol, acetone, and isopropanol may be attributed to the removal of critical bound-water monolayer from the enzyme molecule, which is required for its activity (Ogino and Ishikawa 2001). Though the sensitivity of esterases to solvents differs, polar solvents tend to induce more severe enzyme inactivation than non-polar solvents (Doukyu and Ogino 2010). However, the appreciable stability of EstRag in non-polar organic solvents like hexane and diethyl ether may be due to the interaction between the non-polar organic solvents and the hydrophobic amino acids existing in the lid that shield the enzyme’s catalytic site and keep it open, allowing it to catalyze (Rúa et al. 1993). The better stability of EstRag in hexane compared to that in diethyl ethyl may be attributed to the high log P value of hexane. Similar findings were observed in some halophilic lipases and the esterase from Salimicrobium sp. LY19 (Dheeman et al. 2011; Xin and Hui-Ying 2013).
The activity of EstRag following incubation with NaCl was evaluated to see if it possessed another habitat-specific trait, namely salt-tolerance. In the present findings, EstRag displayed good stability to some extent in the presence of NaCl as it maintained more than 70% of its initial activity at concentrations of up to 2 M of NaCl. This good halotolerance makes EstRag a useful biocatalyst for high-salt processes like cheese ripening and enhancing the flavor of pickled food (Esteban-Torres et al. 2014). EstRag salt tolerance is comparable to that of the esterase EstKT4 (1.0 M) (Esteban-Torres et al. 2014), but it is less than that of Est10 and Est11 (5.0 M) (Wu et al. 2013, 2015).
EstRag’s preferential substrate specificity towards short chain p-nitrophenyl substrates (p-NP-C2 > > p-NP-C4 > > p-NP-C6) is a feature of esterase of family VI (Bornscheuer 2002). This would entail the urgent need to expand EstRag's primary substrate binding region using directed evolution approaches in future research.
The different acyl chain lengths of p-NP-esters were used to measure the kinetic characteristics of EstRag (C2, C4, C6, C8 and C12). Generally speaking, low Km and high Kcat values do indicate that an enzyme has a high affinity for the substrate being employed. Also, The higher the Kcat/Km values the more specific the enzyme is for that substrate. Our results showed that EstRag had a strong affinity towards pNP-C2 (Km = 0.031 mM) with also relatively high catalytic efficiency (Kcat/Km = 657.7 mM−1 pNP-C2 compared to other reported esterases (Table 6). The Km value was much lower than that of estHIJ, Est700, EstC, EstSL3 and CEST (Noby et al. 2019; Zhang et al. 2018; Brault et al. 2012; Wang et al. 2016; Lee et al. 2014) which demonstrated that EstRag had better affinity and preference for the substrate (p-NP-C2). However, not detectable kcat/Km values of EstRag toward longer chain pNP esters (C4, C6, C8 and C12) suggest that they might not be natural substrates of EstRag. Although esterases have different substrate specificity for pNP ester substrates, our results are in accordance with that of other reported cold adapted esterases shown in Table 6. These findings imply that EstRag may prove to be an extremely valuable biocatalyst for the commercial production of volatile short chain esters, such as flavors.
Conclusion
In this study, a novel member of the rare family VI esterases (LYsophospholipase_Carboxylesterase) was cloned from Lysinibacillus sp. YS11, heterologously overexpressed in E. coli, and biochemically characterized for the first time ever. The novel esterase, designated EstRag is cold-adaptive, detergent stable, and Cu2+ resistant. Promising features of EstRag would suggest its potential for exploitation in industrial processes conducted under harsh conditions involving low temperatures, high loads of detergents and Cu2+. EstRag is regarded as a value-added venue for esterases, a large and important category of industrial enzymes.
References
Abady SM, Ghanem MK, Ghanem NB, Embaby AM (2021) Molecular cloning, heterologous expression, and in silico sequence analysis of Enterobacter GH19 class I chitinase (chiRAM gene). Mol Biol Rep 2021:1–19
Ahmed I, Yokota A, Yamazoe A, Fujiwara T (2007) Proposal of Lysinibacillus boronitolerans gen. nov. sp. nov., and transfer of Bacillus fusiformis to Lysinibacillus fusiformis comb. nov. and Bacillus sphaericus to Lysinibacillus sphaericus comb. nov. Int J Syst Evol Microbiol 57:1117–1125. https://doi.org/10.1099/ijs.0.63867-0
Ahsan N, Shimizu M (2021) Lysinibacillus species: their potential as effective bioremediation, biostimulant, and biocontrol agents. Rev Agric Sci 9:103–116. https://doi.org/10.7831/ras.9.0_103
Anthonsen HW, Baptista A, Drabløs F et al (1995) Lipases and esterases: a review of their sequences, structure and evolution. In: El-Gewely MR (ed) Biotechnology annual review. Elsevier, Amsterdam
Arpigny JL, Jaeger KE (1999) Bacterial lipolytic enzymes: classification and properties. Biochem J 343(Pt 1):177–183
Barroca M, Santos G, Gerday C, Collins T (2017) Biotechnological aspects of cold-active enzymes. Psychrophiles from biodiversity to biotechnology. Springer, Cham
Bornscheuer UT (2002) Microbial carboxyl esterases: classification, properties and application in biocatalysis. FEMS Microbiol Rev 26:73–81
Bradford MM (1976) A rapid and sensitive method for the quantitation of microgram quantities of protein utilizing the principle of protein-dye binding. Anal Biochem 72:248–254
Brault G, Shareck F, Hurtubise Y et al (2012) Isolation and characterization of EstC, a new cold-active esterase from streptomyces coelicolor A3(2). PLoS ONE 7:e32041
Cai X, Ma J, Wei D et al (2014) Functional expression of a novel alkaline-adapted lipase of Bacillus amyloliquefaciens from stinky tofu brine and development of immobilized enzyme for biodiesel production. Antonie Van Leeuwenhoek 106:1049–1060. https://doi.org/10.1007/s10482-014-0274-5
Caswell BT, de Carvalho CC, Nguyen H et al (2022) Thioesterase enzyme families: functions, structures, and mechanisms. Protein Sci 31:652–676
Cavicchioli R, Charlton T, Ertan H et al (2011) Biotechnological uses of enzymes from psychrophiles. Microb Biotechnol 4:449–460. https://doi.org/10.1111/j.1751-7915.2011.00258.x
Chahiniana H, Sarda L (2009) Distinction between esterases and lipases: comparative biochemical properties of sequence-related carboxylesterases. Protein Pept Lett 16:1149–1161
Chu X, He H, Guo C, Sun B (2008) Identification of two novel esterases from a marine metagenomic library derived from South China Sea. Appl Microbiol Biotechnol 80:615–625
Cieśliński H, Białkowska AM, Długołęcka A et al (2007) A cold-adapted esterase from psychrotrophic Pseudoalteromas sp. strain 643A. Arch Microbiol 188:27–36. https://doi.org/10.1007/s00203-007-0220-2
D’Amico S, Claverie P, Collins T et al (2002) Molecular basis of cold adaptation. Philos Trans R Soc Lond B Biol Sci 357:917–925
Devedjiev Y, Dauter Z, Kuznetsov SR et al (2000) Crystal structure of the human acyl protein thioesterase I from a single X-ray data set to 1.5 Å. Structure 8:1137–1146
Dheeman DS, Antony-Babu S, Frías JM, Henehan GTM (2011) Purification and characterization of an extracellular lipase from a novel strain Penicillium sp. DS-39 (DSM 23773). J Mol Catal B Enzym 72:256–262
Doukyu N, Ogino H (2010) Organic solvent-tolerant enzymes. Biochem Eng J 48:270–282
Dukunde A, Schneider D, Lu M et al (2017) A novel, versatile family IV carboxylesterase exhibits high stability and activity in a broad pH spectrum. Biotech Lett 39:577–587. https://doi.org/10.1007/s10529-016-2282-1
Esteban-Torres M, Santamaría L, de Rivas B, Muñoz R (2014) Characterisation of a cold-active and salt-tolerant esterase from Lactobacillus plantarum with potential application during cheese ripening. Int Dairy J 39:312–315. https://doi.org/10.1016/j.idairyj.2014.08.004
Fu C, Hu Y, Xie F et al (2011) Molecular cloning and characterization of a new cold-active esterase from a deep-sea metagenomic library. Appl Microbiol Biotechnol 90:961–970. https://doi.org/10.1007/s00253-010-3079-0
Fu J, Leiros H-KS, de Pascale D et al (2013) Functional and structural studies of a novel cold-adapted esterase from an Arctic intertidal metagenomic library. Appl Microbiol Biotechnol 97:3965–3978. https://doi.org/10.1007/s00253-012-4276-9
Ganasen M, Yaacob N, Rahman RNZRA et al (2016) Cold-adapted organic solvent tolerant alkalophilic family I.3 lipase from an Antarctic Pseudomonas. Int J Biol Macromol 92:1266–1276. https://doi.org/10.1016/j.ijbiomac.2016.06.095
Gricajeva A, Bendikienė V, Kalėdienė L (2016) Lipase of Bacillus stratosphericus L1: cloning, expression and characterization. Int J Biol Macromol 92:96–104. https://doi.org/10.1016/j.ijbiomac.2016.07.015
Guncheva M, Zhiryakova D (2011) Catalytic properties and potential applications of Bacillus lipases. J Mol Catal B: Enzym 68:1–21. https://doi.org/10.1016/j.molcatb.2010.09.002
Hausmann S, Jaeger KE (2010) Lipolytic enzymes from bacteria. Handbook of hydrocarbon and lipid microbiology. Springer, Berlin
Hong S, Lee C, Jang S-H (2012) Purification and properties of an extracellular esterase from a cold-adapted Pseudomonas mandelii. Biotech Lett 34:1051–1055. https://doi.org/10.1007/s10529-012-0866-y
Jaeger KE, Eggert T (2002) Lipases for biotechnology. Curr Opin Biotechnol 13:390–397
Jiang H, Zhang S, Gao H, Hu N (2016) Characterization of a cold-active esterase from Serratia sp and improvement of thermostability by directed evolution. BMC Biotechnol 16:7. https://doi.org/10.1186/s12896-016-0235-3
Jinal HN, Gopi K, Prittesh P et al (2019) Phytoextraction of iron from contaminated soils by inoculation of iron-tolerant plant growth-promoting bacteria in Brassica juncea L. Czern Environ Sci Pollut Res 26:32815–32823. https://doi.org/10.1007/s11356-019-06394-2
Joseph B, Ramteke PW, Thomas G, Shrivastava N (2007) Standard review cold-active microbial lipases: a versatile tool for industrial applications. Biotechnol Mol Biol Rev 2:39–48
Kanjanavas P, Khuchareontaworn S, Khawsak P et al (2010) Purification and characterization of organic solvent and detergent tolerant lipase from thermotolerant Bacillus sp. RN2. Int J Mol Sci 11:3783–3792
Khan MTH, Sylte I (2009) Determinants for psychrophilic and thermophilic features of metallopeptidases of the M4 family. In Silico Biol 9:105–124. https://doi.org/10.3233/ISB-2009-0392
Khudary R, Venkatachalam R, Katzer M et al (2010) A cold-adapted esterase of a novel marine isolate, Pseudoalteromonas arctica: gene cloning, enzyme purification and characterization. Extremophiles 14:273–285. https://doi.org/10.1007/s00792-010-0306-7
Kim KK, Song HK, Shin DH et al (1997) Crystal structure of carboxylesterase from Pseudomonas fluorescens, an α/β hydrolase with broad substrate specificity. Structure 5:1571–1584
Kim YO, Park IS, Kim HK et al (2011) A novel cold-adapted esterase from Salinisphaera sp. P7–4: gene cloning, overproduction, and characterization. J Gen Appl Microbiol 57:357–364. https://doi.org/10.2323/jgam.57.357
Kim YO, Heo Y, Kim HK et al (2012) Gene cloning and characterization of a cold-adapted esterase from acinetobacter venetianus V28. J Microbiol Biotechnol 22:1245–1252
Kim J, Kim S, Yoon S et al (2015) Improved enantioselectivity of thermostable esterase from Archaeoglobus fulgidus toward (S)-ketoprofen ethyl ester by directed evolution and characterization of mutant esterases. Appl Microbiol Biotechnol 99:6293–6301. https://doi.org/10.1007/s00253-015-6422-7
Kovacic F, Babic N, Krauss U, Jaeger K (2019) Classification of lipolytic enzymes from bacteria. Aerobic Utilizat Hydrocarbons Oils Lip 24:255–289
Krulwich TA, Ito M, Gilmour R, Guffanti AA (1997) Mechanisms of cytoplasmic pH regulation in alkaliphilic strains of Bacillus. Extremophiles 1:163–170
Kube M, Chernikova TN, Al-Ramahi Y et al (2013) Genome sequence and functional genomic analysis of the oil-degrading bacterium Oleispira antarctica. Nat Commun. https://doi.org/10.1038/ncomms3156
Kumar L, Singh B, Adhikari DK et al (2012) A thermoalkaliphilic halotolerant esterase from Rhodococcus sp. LKE-028 (MTCC 5562): enzyme purification and characterization. Process Biochem 47:983–991
Laemmli UK (1970) Cleavage of structural proteins during the assembly of the head of bacteriophage T4. Nature 227:680–685
Lee YS (2016) Isolation and characterization of a novel cold-adapted esterase, MtEst45, from microbulbifer thermotolerans DAU221. Front Microbiol. https://doi.org/10.3389/fmicb.2016.00218
Lee YS, Heo JB, Lee JH, Choi YL (2014) A cold-adapted carbohydrate esterase from the oil-degrading marine bacterium microbulbifer thermotolerans dau221: gene cloning, purification, and characterization. J Microbiol Biotechnol. https://doi.org/10.4014/jmb.1402.02033
Lesuisse E, Schanck K, Colson C (1993) Purification and preliminary characterization of the extracellular lipase of Bacillus subtilis 168, an extremely basic pH-tolerant enzyme. Eur J Biochem 216:155–160
Luisa Tutino M, di Prisco G, Marino G, de Pascale D (2009) Cold-adapted esterases and lipases: from fundamentals to application. Protein Pept Lett 16:1172–1180
Ma BD, Yu HL, Pan J et al (2013) A thermostable and organic-solvent tolerant esterase from Pseudomonas putida ECU1011: catalytic properties and performance in kinetic resolution of α-hydroxy acids. Bioresource Technol 133:354–360. https://doi.org/10.1016/j.biortech.2013.01.089
Ma J, Ma Y, Wei W, Wei D (2015) In vivo functional expression of an extracellular Ca2+-independent Bacillus pumilus lipase in Bacillus subtilis WB800N. Annal Microbiol. https://doi.org/10.1007/s13213-015-1035-z
Mahmoud HE, El-Far SW, Embaby AM (2021) Cloning, expression, and in silico structural modeling of cholesterol oxidase of Acinetobacter sp. strain RAMD in E. coli. FEBS Open Bio 11:2560–2575
Maniatis T (1989) Molecular cloning. Decontamination of dilute solutions of ethidium bromide
Marx JC, Collins T, D’Amico S et al (2007) Cold-adapted enzymes from marine antarctic microorganisms. Mar Biotechnol 9:293–304. https://doi.org/10.1007/s10126-006-6103-8
Mavromatis K, Tsigos I, Tzanodaskalaki M et al (2002) Exploring the role of a glycine cluster in cold adaptation of an alkaline phosphatase. Eur J Biochem 269:2330–2335. https://doi.org/10.1046/j.1432-1033.2002.02895.x
Mechri S, Kriaa M, Elhoul Berrouina M et al (2017) Optimized production and characterization of a detergent-stable protease from Lysinibacillus fusiformis C250R. Int J Biol Macromol 101:383–397. https://doi.org/10.1016/j.ijbiomac.2017.03.051
Mohamed YM, Ghazy MA, Sayed A et al (2013) Isolation and characterization of a heavy metal-resistant, thermophilic esterase from a Red Sea Brine Pool. Sci Rep 3:1–8
Noby N, Saeed H, Embaby AM et al (2018) Cloning, expression and characterization of cold active esterase (EstN7) from Bacillus cohnii strain N1: a novel member of family IV. Int J Biol Macromol 120:1247–1255. https://doi.org/10.1016/j.ijbiomac.2018.07.169
Noby N, Hussein A, Saeed H, Embaby A (2019) “Recombinant cold -adapted halotolerant, organic solvent-stable esterase (estHIJ) from Bacillus halodurans. Anal Biochem 591:113554. https://doi.org/10.1016/j.ab.2019.113554
Novototskaya-Vlasova K, Petrovskaya L, Yakimov S, Gilichinsky D (2012) Cloning, purification, and characterization of a cold-adapted esterase produced by Psychrobacter cryohalolentis K5 T from Siberian cryopeg. FEMS Microbiol Ecol 82:367–375. https://doi.org/10.1111/j.1574-6941.2012.01385.x
Ogino H, Ishikawa H (2001) Enzymes which are stable in the presence of organic solvents. J Biosci Bioeng 91:109–116
Oh KH, Nguyen GS, Kim EY et al (2012) Characterization of a novel esterase isolated from intertidal flat metagenome and its tertiary alcohols synthesis. J Mol Catal B Enzym 80:67–73
Park JM, Kang CH, Won SM et al (2020) Characterization of a novel moderately thermophilic solvent-tolerant esterase isolated from a compost metagenome library. Front Microbiol 10:3069
Park JE, Jeong GS, Lee HW et al (2021) Characterization of a novel family IV esterase containing a predicted CzcO domain and a family V esterase with broad substrate specificity from an oil-polluted mud flat metagenomic library. Appl Sci 11:5905
Pesaresi A, Lamba D (2005) Crystallization, X-ray diffraction analysis and phasing of carboxylesterase PA3859 from Pseudomonas aeruginosa. Biochimica et Biophysica Acta 1752:197–201
Petrovskaya LE, Novototskaya-Vlasova KA, Spirina EV et al (2016) Expression and characterization of a new esterase with GCSAG motif from a permafrost metagenomic library. FEMS Microbiol Ecol 92:fiw046. https://doi.org/10.1093/femsec/fiw046
Quyen DT, Dao TT, Nguyen SLT (2007) A novel esterase from Ralstonia sp. M1: gene cloning, sequencing, high-level expression and characterization. Protein Expr Purif 51:133–140
Rizvi A, Ahmed B, Khan MS et al (2021) Psychrophilic bacterial phosphate-biofertilizers: a novel extremophile for sustainable crop production under cold environment. Microorganisms 9:2451
Romano D, Bonomi F, de Mattos MC et al (2015) Esterases as stereoselective biocatalysts. Biotechnol Adv 33:547–565. https://doi.org/10.1016/j.biotechadv.2015.01.006
Rúa ML, Díaz-Mauriño T, Fernández VM et al (1993) Purification and characterization of two distinct lipases from Candida cylindracea. Biochimica et Biophysica Acta 1156:181–189
Santiago M, Ramírez-Sarmiento CA, Zamora RA, Parra LP (2016) Discovery, molecular mechanisms, and industrial applications of cold-active enzymes. Front Microbiol. https://doi.org/10.3389/fmicb.2016.01408
Sarmiento F, Peralta R, Blamey JM (2015a) Cold and hot extremozymes: Industrial relevance and current trends. Front Bioeng Biotechnol. https://doi.org/10.3389/fbioe.2015.00148
Sarmiento F, Peralta R, Blamey JM (2015b) Cold and hot extremozymes: industrial relevance and current trends. Front Bioeng Biotechnol 3:148
Siddiqui KS, Cavicchioli R (2006) Cold-adapted enzymes. Annu Rev Biochem 75:403–433. https://doi.org/10.1146/annurev.biochem.75.103004.142723
van Rossum T, Kengen SWM, van der Oost J (2013) Reporter-based screening and selection of enzymes. FEBS J 280:2979–2996
Wang G, Wang Q, Lin X et al (2016) A novel cold-adapted and highly salt-tolerant esterase from Alkalibacterium sp SL3 from the sediment of a soda lake. Sci Rep. https://doi.org/10.1038/srep19494
Wu G, Wu G, Zhan T et al (2013) Characterization of a cold-adapted and salt-tolerant esterase from a psychrotrophic bacterium Psychrobacterpacificensis. Extremophiles 17:809–819. https://doi.org/10.1007/s00792-013-0562-4
Wu G, Zhang X, Wei L et al (2015) A cold-adapted, solvent and salt tolerant esterase from marine bacterium Psychrobacter pacificensis. Int J Biol Macromol. https://doi.org/10.1016/j.ijbiomac.2015.07.045
Xin L, Hui-Ying Y (2013) Purification and characterization of an extracellular esterase with organic solvent tolerance from a halotolerant isolate, Salimicrobium sp. LY19. BMC Biotechnol 13:1–8
Zhang W, Xu H, Wu Y et al (2018) A new cold-adapted, alkali-stable and highly salt-tolerant esterase from Bacillus licheniformis. Int J Biol Macromol 111:1183–1193
Zhang Y, Lu W, Wang J et al (2021) Characterization of EstDR4, a novel cold-adapted insecticides-metabolizing esterase from deinococcus radiodurans. Appl Sci 11:1864. https://doi.org/10.3390/app11041864
Funding
Open access funding provided by The Science, Technology & Innovation Funding Authority (STDF) in cooperation with The Egyptian Knowledge Bank (EKB). The authors have not disclosed any funding.
Author information
Authors and Affiliations
Contributions
Conceptualization, AME and AIK; methodology: AME and AAM; software: AAM and AME; validation: AIK and AAM; formal analysis: all authors; investigation: AME; AAM and AIK; resources: AAM; data curation: AIK and AME; writing-original draft preparation: AAM and AME; writing-review and editing: all authors; visualization: AAM and AIK; supervision: AIK and AME; project administration: all authors. All authors have read and agreed to the published version of the manuscript.
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no conflict of interest.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary Information
Below is the link to the electronic supplementary material.
11274_2022_3402_MOESM1_ESM.tif
Supplementary file1 (TIF 300 kb)—Ramachandran plot generated by PROCHECK for the 3D predicted model of EstRag. A: the initial predicted 3D model of EstRag. B: the refined 3D model of EstRag
11274_2022_3402_MOESM2_ESM.tif
Supplementary file2 (TIF 341 kb)—Verify 3D for the predicted 3D model of EstRag. A: initial predicted 3D model of EstRag. B. refined predicted 3D model of EstRag
11274_2022_3402_MOESM3_ESM.tif
Supplementary file3 (TIF 706 kb)—ERRAT graph for the predicted 3D model of EstRag. A: initial predicted 3D model of EstRag. B: refined predicted 3D model of EstRag
11274_2022_3402_MOESM4_ESM.tif
Supplementary file4 (TIF 653 kb)—Output of ProSA-web z-score analysis for initial and refined 3D models of EstRag. ProSA-web z-score plot for initial model (A) and refined model (D). Ribbon view of initial model (C) and refined model (F) with lowest energy regions (blue color) and highest energy regions (red color). Energy plot for initial model (B) and refined model €
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Matrawy, A.A., Khalil, A.I. & Embaby, A.M. Molecular study on recombinant cold-adapted, detergent- and alkali stable esterase (EstRag) from Lysinibacillus sp.: a member of family VI. World J Microbiol Biotechnol 38, 217 (2022). https://doi.org/10.1007/s11274-022-03402-5
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s11274-022-03402-5