Abstract
Exploiting multiferroic BiFeO3 thin films in spintronic devices requires deterministic and robust control of both internal magnetoelectric coupling in BiFeO3, as well as exchange coupling of its antiferromagnetic order to a ferromagnetic overlayer. Previous reports utilized approaches based on multi-step ferroelectric switching with multiple ferroelectric domains. Because domain walls can be responsible for fatigue, contain localized charges intrinsically or via defects, and present problems for device reproducibility and scaling, an alternative approach using a monodomain magnetoelectric state with single-step switching is desirable. Here we demonstrate room temperature, deterministic and robust, exchange coupling between monodomain BiFeO3 films and Co overlayer that is intrinsic (i.e., not dependent on domain walls). Direct coupling between BiFeO3 antiferromagnetic order and Co magnetization is observed, with ~ 90° in-plane Co moment rotation upon single-step switching that is reproducible for hundreds of cycles. This has important consequences for practical, low power non-volatile magnetoelectric devices utilizing BiFeO3.
Similar content being viewed by others
Introduction
Substantial effort has been devoted to understand the internal magnetoelectric coupling between ferroelectric (FE) and antiferromagnetic (AF) orders in BiFeO3, motivated by interest in exchange coupling to a ferromagnetic (FM) overlayer for use in nonvolatile magnetoelectric devices1,2,3,4,5. Nearly all approaches to exchange coupling investigated so far rely on coupling between the magnetization of the ferromagnetic overlayer and the small canted moment in BiFeO3 (~ 0.06 µ B Fe−1 6) that originates from the Dzyaloshinskii–Moriya interaction7,8. Due to the spin-cycloid structure found in single crystals of BiFeO3, this net moment averages to zero over a cycloid period (~62 nm3) precluding coupling over macroscopic areas. Suppression of the spin cycloid (e.g., due to strain in thin films9, the presence of domain walls in narrow stripes10,11,12, or application of a large magnetic field13,14) can lead to the formation of a collinear G-type antiferromagnetic order with mutually orthogonal ferroelectric polarization vector (P), Néel vector (L), and canted moment (M c) that allows the possibility of a macroscopic exchange coupling via M c. While P is fixed along the pseudocubic (pc) < 111 > directions, in multidomain epitaxial BiFeO3 films the orientation of L and M c can depend on the type (compressive, tensile) and magnitude of the strain (L. W. Martin, private communication;15).
To stabilize a one-to-one correlation between order parameters in BiFeO3 and exploit this state for robust, deterministic exchange coupling without the complications of domain walls16,17,18,19,20, we have fabricated Co/BiFeO3 heterostructures with ferroelastic and ferroelectric monodomain properties in BiFeO3 over the entire sample21. In bulk single crystals22 and relaxed monodomain films23, a nondeterministic exchange coupling mechanism between BiFeO3 and Fe or Co overlayers has been shown to result from the energy degeneracy of the three allowed {112}pc–type spin-cycloid planes. As a consequence, the first switching event in a single P-domain results in nucleation of multiple AF domains so that the original AF domain state cannot be recovered24.
In the following we demonstrate that, unlike monodomain crystals and relaxed films, strained P-monodomain BiFeO3 films are also AF-monodomain, characterized by a unique internal magnetoelectric state with a one-to-one relationship between P and the cycloid plane orientation that is reproducible after hundreds of switching events. This confirms that strain lifts the cycloid state degeneracy and modifies the internal magnetoelectric coupling of BiFeO3. Consequently, we find that the magnetic order present at the interface with a ferromagnetic overlayer can be changed deterministically by polarization switching that is in turn correlated to the rotation of the magnetization of a Co overlayer. This robust exchange coupling mechanism offers an alternative solution for implementation in potential devices.
Results
Experimental overview
To probe the interfacial magnetoelectric state of ferroelectric and ferroelastic monodomain BiFeO3 films in the down (\(r_1^ - \)) and up (\(r_3^ + \)) polarization states (using the ferroelastic domain notation of ref. 25), to correlate these to the rotation of Co ferromagmetic domains and understand the mechanisms of magnetoelectric coupling, a method for in situ ferroelectric switching during Photoemission Electron Microscope (PEEM) imaging was developed. Figure 1 shows a schematic of the experimental setup and summary of the ferroelectric–antiferromagnetic–ferromagnetic correlations we report here. PEEM imaging allows simultaneous spatially resolved monitoring of changes in ferromagnetic domains (by X-ray Magnetic Circular Dichroism, XMCD, on the Co L 3 edge) and AF domains in the interfacial BiFeO3 (by X-ray Magnetic Linear Dichroism, XMLD, on the Fe L 3 edge), permitting unambiguous tracking of the spin orientations for the ferroelectric down (Fig. 1b) and up (Fig. 1c) states over many switching events. To complement the surface-sensitive information from PEEM imaging, the spin-cycloid properties in the bulk of the film were measured on separately prepared samples by large-area neutron diffraction (ND), also shown in Fig. 1. Magneto-optic Kerr effect (MOKE) measurements were performed at room temperature to confirm the exchange coupling between the BiFeO3 and Co seen by XMCD-PEEM. These results together demonstrate a robust and deterministic exchange coupling between monodomain BiFeO3 and Co at room temperature that can be readily exploited in practical devices.
Antiferromagnetic analysis of the BiFeO3 film
The antiferromagnetic spin-structure in the bulk of the BiFeO3 film and at the interface was studied by ND and XMLD-PEEM, respectively, the latter through light polarization angle scans whose electron-yield signal originates within <10 nm of the surface26. Analysis of ND results (Supplementary Note 2) in the down state (Fig. 2a, c) shows that the ferroelectric monodomain in BiFeO3 possesses a single antiferromagnetic domain with the propagation vector in the film plane and a spin-cycloid plane orientation that is quite different from bulk single crystals, lying 12° from the film plane. XMLD-PEEM analysis shows that this cycloid continues unchanged up to the surface (Fig. 3a). This cycloid plane does not contain the polarization vector P, and is distinct from the three {112}–type planes seen in bulk single crystals24 or the cycloid configuration observed previously in thin films27, for which P lies in the cycloid plane. The cycloid propagation vector k extracted from the ND results is parallel to \([1\bar 10]\) (one of the allowed vectors in bulk, and along the substrate step direction) with a cycloid period of 66 ± 2 nm. The longer period as compared to that in bulk is in quantitative agreement with the value expected for a cycloid plane that does not contain P, as the period should scale inversely with the projection of P onto the plane (projection angle ~ 24°).
In the up state, ND results reveal a similar in-plane cycloid orientation (Fig. 2b, d) as seen in the down state, but XMLD-PEEM analysis (Supplementary Notes 6 and 7 and Supplementary Figs. 9 and 10) shows that a different antiferromagnetic order develops at the interface (Fig. 3b). These magnetoelectric configurations are maintained reproducibly after repeated cycling. The up state is characterized as a majority r 3 + domain (71° switching) deduced by ND and piezoforce microscopy (Supplementary Note 1 and Supplementary Fig. 4); a minority domain (<12%) corresponding to 180° switching (r 1 +) is also found, which we disregard as its presence does not change the analysis or conclusions. ND identifies a single cycloid in the majority domain with orientation similar to that in the down state, but rotated 13° in the direction of the P rotation, with the same propagation vector. This direct experimental identification of a non-bulk-like spin-cycloid plane (including propagation vector and spin orientation) is consistent with evidence that strain can alter the cycloid properties in BiFeO3, albeit differently than proposed in ref. 10 or reported in ref. 27. The ND results demonstrate that the strain state of the film (Supplementary Fig. 1) creates a non-bulk, in-plane orientation of the cycloid only weakly dependent on the polarization vector.
In contrast, surface-sensitive XMLD polarization angular scans in the up state (Fig. 3b) are distinctly different from the down state, and are not consistent with the single-cycloid plane found by ND, nor a cycloid of any orientations found in bulk single-crystal BiFeO3 (Fig. 3c, d and Supplementary Fig. 11). Instead, fitting the XMLD-PEEM results (Supplementary Note 7) requires an additional component beyond the bulk cycloid measured by ND, either collinear antiferromagnetic order with L oriented along the [112]pc direction or a vertical cycloid plane with propagation vector along the substrate [110]pc miscut direction (discussed later). This extra component contributes ~ 25% of the total XMLD-PEEM intensity that should be distributed over 1 nm near the interface. The XMLD-PEEM data summarized here are identical for Co/BiFeO3 and Pt/BiFeO3 interfaces in both polarization states (within error bars).
Ferromagnetic Co response upon BiFeO3 polarization switching
Demonstration of a one-to-one correlation between the magnetoelectric state of BiFeO3 and Co magnetization is presented in Co XMCD-PEEM vector maps for a down-up-down switching sequence (Fig. 4) at 120 K. Analysis of the Co XMCD-PEEM images (Supplementary Note 8) yields vector magnetization maps of the Co magnetization showing a ~ 90° in-plane rotation upon ferroelectric switching. In the down state (Fig. 4a, c), the Co uniaxial anisotropy axis lies along the substrate step edges produced by the miscut (Supplementary Note 6 and Supplementary Figs. 2, 5); in the up state, the anisotropy axis rotates nearly 90° toward the [110]pc miscut direction (Fig. 4b). This correlation between Co anisotropy axis and BiFeO3 polarization demonstrates a previously unreported type of intrinsic exchange coupling between BiFeO3 and Co that is deterministic, robust, and reliable over hundreds of switching cycles (Supplementary Note 5 and Supplementary Fig. 8). In the down state of BiFeO3, Co domains are split parallel and antiparallel to the \([1\bar 10]\) pc step edges direction, a distribution resulting from demagnetization effects that minimize the magnetostatic energy of the large electrode (100 × 100 µm2) and likely would not be present as the dimensions approach the micrometer scale28. The same anisotropy axis is seen in Co deposited directly on identically miscut (001) SrTiO3 substrates (Supplementary Note 3 and Supplementary Figs. 5, 6). When the BiFeO3 is switched to up state, the parallel/antiparallel Co domains rotate toward the [110]pc miscut direction (perpendicular to the step edges), as seen in the polar plots (Fig. 4d–f). Analyzing the local spin rotations, they are closer to ~ 75° upon switching (Supplementary Note 8 and Supplementary Fig. 12) leading to the overall distribution shown in the polar plots of Fig. 4d–f.
Evidence of room temperature exchange coupling
MOKE measurements at room temperature using the configuration shown schematically in Fig. 5a, b demonstrate the same exchange coupling seen in the XMCD-PEEM vector maps. M-H hysteresis loops (Fig. 5c, d) with the magnetic field applied along the \([110]_{{\mathrm{pc}}}\) miscut direction and \([1\bar 10]_{{\mathrm{pc}}}\) step edges direction show that the Co anisotropy axis rotates from parallel to the step edges in down state to nearly perpendicular in the up state. The hysteresis loops can be simulated using the Stoner–Wohlfarth model that includes two anisotropy energies, one from the steps present in both down and up states, and a second appearing in the up state that is oriented nearly along the miscut, as suggested by the XMLD-PEEM results shown in Fig. 3. In this model, fits to the hysteresis loops confirm the ~ 75° easy axis rotation upon switching seen in the XMCD vector maps (Supplementary Note 4 and Supplementary Fig. 7).
Discussion
The combined experimental results suggest an exchange coupling mechanism across the Co/BiFeO3 interface that controls the Co rotation upon switching. In the down state (equivalently, for Co deposited on miscut SrTiO3) the magnetic easy axis is imposed by the miscut that breaks the symmetry between the otherwise equivalent in-plane directions. Since BiFeO3 up and down states present exactly the same in-plane strain, no strain-mediated—piezomagnetic or magnetostrictive—coupling across the interface can explain the observed Co spin rotation. In contrast, up and down states present different polarization charge screening at the interface; in the up state an excess of metallic electrons accumulating at the interface is expected, while in the down state these will be replaced by positive carriers. Such changes in electronic density can potentially influence the behavior of both BiFeO3 and Co close to the interface. In the case of ferromagnetic metals, such effects are known to affect the magnetic anisotropy between different crystallographic directions, and could potentially lead to a rotation of the easy axis29. However, experimentally we measure stronger coupling to Co for thinner BiFeO3 films, while charge-driven effects should be independent of thickness; hence, we can tentatively disregard the direct effect of screening on the Co layer.
Finally, and unexpectedly, we have found a difference in the magnetic structure of BiFeO3 near the interface for up and down states. Our ND data indicate that the two polarization states display a similar (001)pc cycloid plane in the bulk of the film, while XMLD analysis reveals that the up state presents an additional interfacial magnetic structure suggesting spins lying within the vertical plane containing the [110]pc miscut direction, most likely collinear. This feature clearly breaks the symmetry between [110]pc miscut and \([1\bar 10]\) pc step edges directions, and could be responsible for the preferred Co spin orientation in the up state. Two ingredients are needed for such a mechanism to be active, namely, exchange coupling between Fe and Co spins across the interface, and the presence of local ferromagnetic moments along the miscut direction in the interfacial BiFeO3. While the former can be taken for granted, the latter is more delicate, but not implausible; indeed, such a situation may pertain to canted antiferromagnetic or cycloid structures, or if the near-interface spin-structure of BiFeO3 were ferromagnetic or A-type antiferromagnetic (presenting ferromagnetically aligned spins within (001)-oriented FeO2 planes). Our data are compatible with these possible configurations, but does not allow distinguishing between them.
Several concluding points are worth making regarding the unusual interfacial magnetic structure of BiFeO3 in the up state driving the exchange coupling. First, epitaxial strain is known to affect the BiFeO3 antiferromagnetic structure10,27, with our results showing selection of a previously unseen cycloid variant in the bulk of the film and for the first time a polarization dependence in the surface order that correlates with the Co rotation. Second, accumulation of free carriers may favor specific magnetic interactions in the interfacial BiFeO3, with the presence of extra electrons in the up state expected to favor ferromagnetic interactions that could lead, e.g., to sizeable localized canted moments30. Such a scenario is physically sound, and could explain the observed magnetoelectric control of Co spins. Finally, we note that the deterministic and robust exchange coupling reported here is a consequence of the magnetoelectric properties of monodomain BiFeO3 films that has clear potential for applications: the observed in-plane Co moment rotation of ~ 90° over device-relevant areas is quite sufficient for large changes of tunneling magnetoresistance31 in technologically useful magnetic tunnel junctions. The significance of these results lies also in the unique advancement of state-of-the-art approaches to multifunctional oxide film growth (domain engineering and epitaxial strain in multiferroics) and characterization via spectroscopic and diffraction techniques available only at large-scale facilities (PEEM with in situ ferroelectric switching and ND) that are necessary to elucidate the microscopic characteristics of the magnetoelectric and exchange coupling.
Methods
Sample preparation and device fabrication
(001) SrTiO3 single-crystal substrates with 4° miscut toward [110]pc direction are used for domain engineering of BiFeO3 thin films21. A 35 nm thick SrRuO3 bottom electrode layer is first deposited by 90° off-axis sputtering32 at 600 °C followed by 300 nm of BiFeO3 films grown by double-gun off-axis sputtering at 750 °C with Ar:O2 ratio of 4:1 at a total pressure of 400 mTorr33. The BiFeO3 target contains 5% excess Bi2O3 to compensate for bismuth volatility33. Subsequently, 2 nm Co and 3 nm Al are deposited as the ferromagnetic and passivation layers by magnetron sputtering at room temperature without applied magnetic field. Capacitor structures were defined lithographically with a photoresist mask and subsequently ion-milled down to the BiFeO3 film. The devices were wirebonded to a specially designed printed-circuit board and/or chip carrier for in situ ferroelectric switching measurements in the PEEM. The substrate miscut induces the growth of a single ferroelastic domain variant, while the SrRuO3 bottom electrode introduces an electrical boundary condition favoring the ferroelectric down r 1 – state21 since the depolarization field can be screened by free charge in the electrode during growth34. 71° switching leads to the monodomain up r 3 + state. Multiple (separate) top electrodes were patterned on a 5 × 10 mm2 sample for ND experiments, ensuring >98% of the film volume was switched and confirmed by PE measurement without preset loop.
PEEM
The PEEM results were recorded on beam line i06 (Diamond Light Source, UK), which is equipped with two Apple-II undulators delivering a high flux of X-rays on a 10 µm diameter spot with tunable polarization in the energy range 80–2100 eV. The light polarization can be left or right circular or linear (with variable orientation of E in the range \(0^\circ \le \theta _{\mathbf{E}} \le 90^\circ \)). The beam is incident on the sample at an angle of 16° and \(\theta _{\mathbf{E}} = 0^\circ \) corresponds to s-polarization. The PEEM is an Elmitec SPELEEM-III equipped with a manipulator stage with motorized x, y translation and manipulator azimuthal rotation \(\phi _{\mathrm{M}},\) a liquid nitrogen cryostat and a Multiferroic Tester II (Radiant Technologies, Inc., Albuquerque NM)) to determine the FE state of the device in situ. \(\phi _{\mathrm{M}}\) could be changed over a 200° range. The probing depth of the PEEM technique in electron yield is estimated to be ~ 5 nm. The cobalt FM domain structure was measured by combining XMCD-PEEM images at the Co L 3 edge taken at ϕ M = 90° and 0° to obtain the local magnetization in-plane vector35. These XMCD-PEEM vector maps of the Co FM domain structure were performed after poling the sample either up or down with the FE tester. The FE state of the BiFeO3 was checked with the FE Tester before and after each of the XMLD polar scans as shown in Supplementary Fig. 3.
Neutron diffraction
Single-crystal neutron diffraction experiments were performed using WISH, a time-of-flight diffractometer at ISIS, the UK Neutron and Muon Spallation source (Supplementary Note 2).
Data availability
The data that support the findings of this study are available from the corresponding authors on reasonable request.
References
Eerenstein, W., Mathur, N. D. & Scott, J. F. Multiferroic and magnetoelectric materials. Nature 442, 759–765 (2006).
Béa, H., Gajek, M., Bibes, M. & Barthélémy, A. Spintronics with multiferroics. J. Phys. Condens. Matter 20, 434221 (2008).
Catalan, G. & Scott, J. F. Physics and applications of bismuth ferrite. Adv. Mater. 21, 2463–2485 (2009).
Bibes, M. & Barthélémy, A. Multiferroics: towards a magnetoelectric memory. Nat. Mater. 7, 425–426 (2008).
Martin, L. W. et al. Nanoscale control of exchange bias with BiFeO3 thin films. Nano Lett. 8, 2050–2055 (2008).
Ramazanoglu, M. et al. Local weak ferromagnetism in single-crystalline ferroelectric BiFeO3. Phys. Rev. Lett. 107, 207206 (2011).
Rahmedov, D., Wang, D., Iniguez, J. & Bellaiche, L. Magnetic cycloid of BiFeO3 from atomistic simulations. Phys. Rev. Lett. 109, 037207 (2012).
Dong, S. et al. Exchange bias driven by the dzyaloshinskii-moriya interaction and ferroelectric polarization at G-Type antiferromagnetic perovskite interfaces. Phys. Rev. Lett. 103, 127201 (2009).
Sando, D. et al. Crafting the magnonic and spintronic response of BiFeO3 films by epitaxial strain. Nat. Mater. 12, 641–646 (2013).
Holcomb, M. B. et al. Probing the evolution of antiferromagnetism in multiferroics. Phys. Rev. B 81, 134406 (2010).
Zhao, T. et al. Electrical control of antiferromagnetic domains in multiferroic BiFeO3 films at room temperature. Nat. Mater. 5, 823–829 (2006).
Heron, J. T. et al. Electric-field-induced magnetization reversal in a ferromagnet-multiferroic heterostructure. Phys. Rev. Lett. 107, 217202 (2011).
Ruette, B. et al. Magnetic-field-induced phase transition inBiFeO3 observed by high-field electron spin resonance: cycloidal to homogeneous spin order. Phys. Rev. B 69, 064114 (2004).
Popov, Y. F. et al. Linear magnetoelectric effect and phase transitions in bismuth ferrite, BiFeO3. JETP Lett. 57, 69–73 (1993).
Wojdeł, J. C. & Íñiguez, J. Ab Initio indications for giant magnetoelectric effects driven by structural softness. Phys. Rev. Lett. 105, 037208 (2010).
Heron, J. T. et al. Deterministic switching of ferromagnetism at room temperature using an electric field. Nature 516, 370–373 (2014).
Baek, S. H. et al. The nature of polarization fatigue in BiFeO3. Adv. Mater. 23, 1621–1625 (2011).
Zou, X. et al. Mechanism of polarization fatigue in BiFeO3. ACS Nano 6, 8997–9004 (2012).
Seidel, J. et al. Conduction at domain walls in oxide multiferroics. Nat. Mater. 8, 229–234 (2009).
Jang, H. W. et al. Domain engineering for enhanced ferroelectric properties of epitaxial (001) BiFeO3 thin films. Adv. Mater. 21, 817–823 (2009).
Baek, S. H. et al. Ferroelastic switching for nanoscale non-volatile magnetoelectric devices. Nat. Mater. 9, 309–314 (2010).
Lebeugle, D. et al. Exchange coupling with the multiferroic compound BiFeO3 in antiferromagnetic multidomain films and single-domain crystals. Phys. Rev. B 81, 134411 (2010).
Ratcliff, W. et al. Electric-field-controlled antiferromagnetic domains in epitaxial BiFeO3 thin films probed by neutron diffraction. Phys. Rev. B 87, 140405(R) (2013).
Johnson, R. D. et al. X-Ray imaging and multiferroic coupling of cycloidal magnetic domains in ferroelectric monodomain BiFeO3. Phys. Rev. Lett. 110, 217206 (2013).
Streiffer, S. K. et al. Domain patterns in epitaxial rhombohedral ferroelectric films. I. Geometry and experiments. J. Appl. Phys. 83, 2742–2753 (1998).
Ruosi, A. et al. Electron sampling depth and saturation effects in perovskite films investigated by soft x-ray absorption spectroscopy. Phys. Rev. B 90, 125120 (2014).
Bertinshaw, J. et al. Direct evidence for the spin cycloid in strained nanoscale bismuth ferrite thin films. Nat. Commun. 7, 12664 (2016).
Johnson, M. T. et al. Magnetic permeability and intra-granular domain structure in polycrystalline ferrites. J. Magn. Magn. Mater. 104–107, 421–422 (1992).
Duan, C.-G. et al. Tailoring magnetic anisotropy at the ferromagnetic/ferroelectric interface. Appl. Phys. Lett. 92, 122905 (2008).
Vinokurov, D. L. & Morosov, A. I. Surface distortions in a weak ferromagnet. Phys. Solid State 55, 986–989 (2013).
Jaffrès, H. et al. Angular dependence of the tunnel magnetoresistance in transition-metal-based junctions. Phys. Rev. B 64, 064427 (2001).
Eom, C. B. et al. In situ grown YBa2Cu3O7−d thin films from single–target magnetron sputtering. Appl. Phys. Lett. 55, 595–597 (1989).
Das, R. R. et al. Synthesis and ferroelectric properties of epitaxial BiFeO3 thin films grown by sputtering. Appl. Phys. Lett. 88, 242904 (2006).
Fong, D. et al. Stabilization of monodomain polarization in ultrathin PbTiO3 films. Phys. Rev. Lett. 96, 127601 (2006).
Moya, X. et al. Giant and reversible extrinsic magnetocaloric effects in La0.7Ca0.3MnO3 films due to strain. Nat. Mater. 12, 52–58 (2013).
Acknowledgements
This work was supported by the Army Research Office through grant W911NF-10-1-0362 and W911NF-13-1-0486. PEEM measurements at Diamond Synchrotron (Didcot, UK) were performed at the i06 beamline under proposals nt12084, nt13225, and si11589. Part of this work was performed at the Surface/Interface: Microscopy (SIM) beamline of the Swiss Light Source, Paul Scherrer Institut, Switzerland. Work at Argonne National Laboratory was supported by the US DOE, Office of Science, Office of Basic Energy Sciences, under Contract No. DEAC02-06CH11357. M.v.V. is supported by the U.S. DOE under Award No. DE-FG02-03ER46097. R.D.J. acknowledges STFC for the provision of beam time on the WISH instrument at ISIS, proposal number RB1600019, and P. Manuel for data collection. R.D.J. acknowledges support from a Royal Society University Research Fellowship. J.Í. acknowledges support from the Luxembourg National Research Fund (Grant number FNR/P12/4853155).
Author information
Authors and Affiliations
Contributions
C.B.E., B.A.D., and W.S. conceived the project. W.S. grew and patterned the BiFeO3 heterostructures and performed AFM, PE, and PFM measurements. F.M., J.P.P., W.S., B.A.D., J.I., C.A.F.V., S.S.D., and L.H. took the PEEM data, and F.M. and S.S.D. analyzed it. J.W.F., B.A.D., J.P.P., W.S., J.C.F., and S.R. took and analyzed the XAS measurements. Neutron diffraction data were taken by R.D.J. and analyzed by R.D.J. and P.G.R., and J.I., K.R., and W.S. took and analyzed the MOKE measurements. M.v.V. and J.W.F. performed multiplet modeling of XAS/XMLD data. T.K. and W.S. performed and analyzed XRD. J.Í. provided theoretical analysis. All authors participated in discussion of the results and the manuscript. C.B.E. directed the research.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing financial interests.
Additional information
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Electronic supplementary material
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Saenrang, W., Davidson, B.A., Maccherozzi, F. et al. Deterministic and robust room-temperature exchange coupling in monodomain multiferroic BiFeO3 heterostructures. Nat Commun 8, 1583 (2017). https://doi.org/10.1038/s41467-017-01581-6
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467-017-01581-6
- Springer Nature Limited
This article is cited by
-
Voltage control of multiferroic magnon torque for reconfigurable logic-in-memory
Nature Communications (2024)
-
Influence of phase dominance on structural, magneto-dielectric, magnetic-electric properties of (Ba0.85Ca0.15Zr0.1Ti0.9)O3-CoFe2O3 composites
Journal of Materials Science: Materials in Electronics (2021)
-
Particle size dependence of the electrochemical properties of SrMnO3 supercapacitor electrodes
Journal of Solid State Electrochemistry (2021)
-
Structure, Performance, and Application of BiFeO3 Nanomaterials
Nano-Micro Letters (2020)
-
Shear-strain-mediated magnetoelectric effects revealed by imaging
Nature Materials (2019)