Abstract
How the continental lithosphere deforms far away from plate boundaries has been long debated. The Tianshan is a type-example of ongoing lithospheric deformation in an intracontinental setting. It formed during the Paleozoic accretion of the Altaids and was rejuvenated in the Cenozoic, which might be a far-field response to the India-Asia collision. Here we present seismic images of the lithosphere across the central Tianshan, which were constructed from receiver functions and Rayleigh wave dispersions along a N–S-trending linear seismic array. We observe an extensively deformed lithosphere in the Tianshan with inherited, structurally controlled brittle deformation in the shallow crust and plastic deformation near the Moho. We find that earlier multiple accretionary structures were preserved in the crust, which was deformed by pure-shear shortening in the south and thick-skinned tectonics in the north but was limitedly underthrusted by surrounding blocks. A balanced cross-section of Moho discontinuities supports the concept that intracontinental deformation in the Tianshan intensified synchronously with the direct contact between the underthrusting Indian slab and the Tarim Craton in the Late Miocene (~10 Ma). These findings provide a robust and unified seismic model for the Tianshan Orogen, and confirm that effective delivery of the India-Asia collision stress induced the rejuvenation of this intracontinental orogen.
Similar content being viewed by others
Introduction
Orogens, viewed as a result of rigid plate collision, are largely confined to plate boundaries1, whereas orogens inside continental plates are referred to as intracontinental orogens2. The Tianshan Orogen (Fig. 1), situated in the southern Altaids3,4, records long-lived accretion and continental growth in the Paleozoic3,4,5. In the Cenozoic, this orogen was rejuvenated and re-deformed by the India-Asia collision that was thousands of kilometers away6,7,8. Hence, the Tianshan Orogen is an ideal site to investigate ongoing intracontinental deformation.
Numerical models have suggested that rheological heterogeneity of the lithosphere controlled the intracontinental deformation of the Tianshan9,10,11, but it remains debatable how the deformation was accommodated across the orogen and what the tectonic trigger was. The Cenozoic deformation of the Tianshan has been related to the progressive growth of the Tibetan Plateau, which created the high gravitational potential energy necessary to transmit the pressure northwards5,8,9. Thermochronologic and stratigraphic studies indicate that the intracontinental deformation of the Tianshan commenced at a low strain in the Early Miocene and significantly increased at ~10 Ma12,13,14, which was much later than the initial continental collision between India and Asia at ~55 Ma15,16. Another model links the Tianshan to the transpressional system of the right-slip shears induced by the oblique convergence between Arabia and Asia16. Despite some of the estimated age of continental collision between Arabia and Asia being close to the uplift of the Tianshan17, it remains unclear whether the soft continental collision suggested there18 can cause the uplift of the distant Tianshan. Clearly, a better knowledge of the spatial and temporal development of the structures across the Tianshan could significantly improve the understanding of how and where the continental lithosphere responds to the far-field plate collisions.
Geophysical investigations support the hypothesis that the upper mantle beneath the Tianshan is so weak19,20,21 that it accumulated strain from the distant but ongoing India-Asia collision. As a prominent intracontinental deformation orogen, the Tianshan has accommodated ~20-mm/yr N–S shortening, which is approximately half of the present-day India-Asia convergence rate22,23. Previous seismic images seem to suggest that the N–S shortening was accommodated by large-scale underthrusting of the Tarim and Kazakh lithospheres20,24,25,26,27. Had such a scenario existed, most of the N–S shortening would have occurred near the northern and southern discrete boundaries, as is the case in the Himalayas where the Indian slab is underthrusting beneath the Tibetan Plateau (Fig. 1a). However, geodetic and neotectonics observations indicate that the shortening in the Tianshan is distributed throughout the orogen without a significant increase close to the boundaries22,23,28 (Fig. 1a).
The Cenozoic N–S shortening of the Tianshan shows an along-strike variation and decreases from west to east22,23. The central Tianshan, with the western boundary at the Talas-Ferghana Fault, is adjacent to the sub-horizontal underthrusting Indian slab beneath the Pamir Plateau and the West Kunlun29,30,31,32,33 (Fig. 1a) and experienced the strongest Cenozoic N–S shortening along the entire orogen23,34. At the eastern, topographically low, termination of the Tianshan, the horizontal shortening in the Late Cenozoic was only 10–15 km and the deformation changed into the left-lateral transpressional type8.
Here, we studied the seismic structures of the crust and mantle lithosphere beneath the central Tianshan to provide a comprehensive image of the ongoing intracontinental deformation. The seismic cross-section of this study is close to the western end of the Tianshan Orogen, which is tectonically subdivided, from the north to the south, into the Issyk Kul Arc (IKA), Naryn Arc (NA), and South Tianshan Accretionary Complex (STAC), separated by ophiolitic mélanges and/or large-scale faults4 (Fig. 1). We collected data mainly from a N–S aligned linear broadband seismic array of the Middle AsiaN Active Source project (MANAS)25 (Fig. 1), and applied the joint inversion scheme of receiver functions and Rayleigh wave dispersions35 to construct a S-wave velocity (VS) model, and the common conversion point (CCP) stacking technique36 to image the geometry of the Moho and intracrustal interfaces. The results exhibit a spatial relationship between the surface deformation and the deep structures of the Tianshan, and further illustrate the mechanism and essential conditions for the intracontinental deformation.
Results
The VS model and CCP stacked receiver function image constructed in this study are shown in Fig. 2. The cross-section passes through different tectonic units of the Tianshan Orogen4, i.e., IKA, NA, and STAC. The VS model reveals a widespread low-VS middle-lower crust (~3.4 km/s) beneath the STAC, and a series of elongate low-VS anomalies (~3.5 km/s) in the middle crust confined to several bands beneath the NA and IKA (Fig. 2d). These bands of low-VS anomalies correlate well with the negative Ps phases in the CCP image, the southernmost of which can be traced as a clear interface that dips to the south at ~30° beneath the NA (Fig. 2c).
In the CCP image (Fig. 2c), the Moho can be traced by strong positive Ps phases. Along the cross-section, the Moho has been thrust-imbricated into several segments beneath the entire Tianshan Orogen and a doublet beneath the Nikolaev Line (NL). The deep Moho segments are located at ~70 km depth below the STAC and at ~60 km depth below the IKA, whereas shallow segments are found at 40–50 km depth below the Tarim Craton, NA, and Kazakh Shield. The Moho thrusts appear to correlate with the sub-Moho Vs variations. Contrasting structures in the uppermost mantle are shown from south to north across the NL. A 40-km thick high-VS mantle lid (~4.5 km/s) lies above the low-VS anomaly (~4.1 km/s) beneath STAC and NA, whereas a thick high-VS anomaly (~4.5 km/s) spreads over the entire depth range beneath IKA and Kazakh Shield in the north and beneath Tarim Craton in the south (Fig. 2d).
Discussion
Inherited properties control shallow crustal shortening
Along the profile, a number of active thrust faults can be identified by large slip rates (>2.0 mm/yr)28 (Fig. 2b) and significantly increased strain rates37 (Fig. 2a). In our crustal model, we observe several south-dipping low-VS bands, which extend continuously from the shallow to middle-lower crust (Fig. 2c, d) and correlate well with active faults at the surface. These bands represent crustal shear zones with weak rheology at depth38. Given the position and geometry of these crustal structures, most of the shallow crustal shortening in the NA and IKA was likely accommodated by thick-skinned tectonics, which is consistent with the intense seismicity near the shear zones with high-angle thrust focal mechanisms39. The high and flat topography of the STAC and the strongly depressed Moho below it are indications of extensive crustal shortening. However, the fault slip rate observed in the STAC is extremely small (~0.3 mm/yr) (Fig. 2b), implying that the STAC underwent a pure-shear shortening with diffusive deformation accommodated by the rheologically weak crust. This model is supported by the stable low stain rate (~20 × 10−9/yr, Fig. 2a) and lack of seismic activity (Fig. 2d).
These differences in shallow crustal deformation structures correlate well with the locations of tectonic terranes accreted in the Paleozoic, i.e., the pure-shear shortening in the STAC contrasts with the thick-skinned tectonics in the NA and IKA (Fig. 2a–d). Magnetotelluric studies also show that the crust of the central Tianshan consists of isolated high resistivity bodies separated by conductive zones in the north, but low resistivities in the southern part adjacent to the Tarim Craton40. The STAC was generated by the long-lived consumption of the South Tianshan Ocean in the Paleozoic. It contains high/ultrahigh-pressure rocks, ophiolitic mélanges, and imbricated sedimentary rocks, which are interpreted as off-scraped fragments4 (Fig. 2b). Such an accretionary wedge was too weak to deliver the stresses and in consequence experienced pure-shear shortening in response to the India-Asia collision, whereas the crust of the Paleozoic volcanic arcs (NA and IKA) to the north was so strong4,28 that active faults were able to penetrate into the deep crust to accommodate the contractional stress (Fig. 2b–d).
Moho deformation responses to deep crustal shortening
Previous models have proposed large-scale underthrusting of the Tarim Craton and/or the Kazakh Shield beneath the Tianshan24,25,26,27. Our results demonstrate that the underthrusting of the lower crust is only limited in the Tarim Craton and even negligible in the Kazakh Shield, instead, prominent Moho steps are visible near the southern and northern boundaries of the Tianshan that were accompanied by the fade of seismic activities in the lower crust (Fig. 2c, d, see details in the Supplementary Text 1). Another accordance of the underthrusting model is the high‐velocity anomalies in the upper mantle of the Tianshan observed in the teleseismic body wave tomographic images20, which were interpreted as a deeply subducted lithospheric mantle. However, a large amount of shortening (>500 km, according to the scale of anomalies in Lei & Zhao20) expected in the interpreted model is difficult to reconcile with the short rejuvenation history of the Tianshan (~10 Ma)12,13,14, even with the current high contractional rate (~20 mm/yr)22,23.
Based on the almost linear decrease of GPS velocities across the Tianshan, England and Molnar41 argued that the Tianshan lithosphere has a spatially invariant strength controlled by its low-temperature plasticity, which resulted in plastic deformation around the Moho that has accommodated the stress in the ductile lithosphere. Interestingly, our refined crustal model shows a significant discontinuous Moho with thrust structures across the Tianshan (Fig. 2c, d). Similar Moho discontinuities were imaged in the eastern Tianshan42,43, although the lateral variation along the strike of the orogen is unclear. It should be noted that the peneplanation in the Tianshan is generally inferred to have developed during the Mesozoic tectonic quiescence44 after the Paleozoic accretion of the Altaids4,5. Accordingly, the Moho can be used as a marker horizon for estimating the amount of N–S shortening across the Tianshan in response to the India-Asia collision in the Cenozoic. As shown in Fig. 2e, we estimate that the Cenozoic N–S shortening was ~85 km by balancing the Moho length and ~130 km by balancing the crustal volume across the Tianshan, respectively. It can be inferred that the significant N–S shortening started at ~11–6 Ma by combining the present-day N–S shortening rates of ~15 mm/yr from GPS observations (Fig. 2a) and ~12 mm/yr from Late Quaternary fault slip rates (Fig. 2b) across the estimated section. Such an inferred time is similar to the onset of rapid uplift of the Tianshan (~10 Ma)12,13,14 (Fig. 1a), which confirms that the deep deformation of the central Tianshan is performed as the Moho segments are discontinued by localized thrusts. Therefore, we propose that the plastic deformation close to the Moho mainly accommodated the N–S shortening in the deep lithosphere of the central Tianshan, and that the underthrusting of the Tarim Craton or the Kazakh Shield should be on a limited scale. This deformation model correlates well with the shallow crustal structures revealed in this study and with the comprehensive observations from geodesy and neotectonics, and supports the concept that intracontinental deformation in the Tianshan intensified in the Late Miocene (~10 Ma).
Rejuvenation of the Tianshan Orogen
Our images reveal that the lithosphere of the Tianshan was extensively deformed in response to the Cenozoic India-Asia collision. The question remains as why the amount of the India-Asia convergence accommodated in the Tianshan with the N–S shortening of ~20 mm/yr is nearly equivalent to that in the Tibetan Plateau22,23. The former should be much lower considering the lithospheric strength of the Tianshan is an order of magnitude greater than that of the Tibetan Plateau41. After the break-off of Greater India (i.e., the northern passive continental margin of the Indian plate, as suggested by plate reconstructions and seismic tomography studies45), the India-Asia convergence changed from continental subduction to continental collision due to the buoyancy of the Indian Craton with its thick and depleted lithospheric mantle46,47. Although the Tibetan Plateau and the Indian Craton are now abutted along the Indus-Yarlung ophiolite belt at the surface, seismic images suggest that the cratonic Indian slab has underthrust sub-horizontally farther northwards for several hundred kilometers beneath the western Tibetan Plateau31,48. Previous receiver function studies confirm that the front of the cratonic Indian slab has reached the Tarim Craton in the West Kunlun29,30,31 and thrust under the Pamir Plateau northwards to the intermediate-depth seismic zone32,33 (Fig. 1a). The synchronous foundering of the deep crust beneath the Pamir Plateau at ~11 Ma, documented by the xenoliths in the southeastern Pamir and related to the indentation process of the cratonic Indian slab beneath the Pamir Plateau49, provides an age record for the initial contact between the Indian slab and the Tarim Craton. The balanced cross-section analysis of the Moho discontinuities in this study (Fig. 2e) and the onset of rapid exhumation in the Tianshan12,13,14 jointly support the concept that the intracontinental deformation in the Tianshan intensified after the Late Miocene (~10 Ma) synchronously with the India-Tarim collision. Therefore, we propose that the direct contact between the cratonic Indian slab and the Tarim Craton enabled the compressional stresses to reach the distant intracontinental setting50 and intensified the rejuvenation of the Tianshan Orogen. Such a stress transformation in the upper mantle was a significant contributor to the slowing-down of the India-Asia convergence51 and to the clockwise rotation of the Tarim Craton34, but also can well explain why the Tianshan was rejuvenated much later than the initial India-Asia collision11.
Previous studies have also reported low-velocity anomalies in the upper mantle beneath the Tianshan19,20,21, implying a high temperature and weak rheology there, which were likely caused by lithospheric detachment52,53. Small-volume Cretaceous–Paleogene basalts scattered in the Tianshan54 and contemporaneous high-heat flux (∼80–85 mW/m2) inferred from xenoliths55 suggest that the uppermost mantle in the Tianshan should have been hot and weak before the Cenozoic shortening. Although our Vs model has a limited resolution in the mantle depth, it does image upper mantle low-VS anomalies overlain by a thin mantle lid extending from the Moho to 80–90-km depth beneath the STAC and the NA (Fig. 2d). A similar mantle lid structure is also indicated in a previous S-wave receiver function study56. Such a pre-weakened lithosphere of the Tianshan weaker than its surroundings is plausible to accommodate the vast contractional stresses2,10,57. The thin mantle lid also might be beneficial for the Moho thrust deformation, as indicated by the Moho doublet developed in the northern edge beneath the NL (Fig. 2c, d).
Therefore, with the direct contact between the cratonic Indian slab and the Tarim Craton, the India-Asia collisional stress could effectively reach the pre-weakened Tianshan and contribute to its rejuvenation (Fig. 3). Our refined crustal model well demonstrates that inherited properties in the crust controlled shallow brittle deformation as indicated by the pure-shear shortening of the accretionary wedge (STAC) and the thick-skinned deformation of the Paleozoic volcanic arcs (NA and IKA). The plastic deformation accommodated N–S shortening in the deep and thrust-imbricated the Moho into several segments across the central Tianshan. The balanced cross-section of Moho discontinuities supports the idea that intracontinental deformation in the Tianshan intensified synchronously at the time of the direct contact between the cratonic Indian slab and the Tarim Craton in the Late Miocene (~10 Ma). These findings provide a robust and unified rejuvenation model for the Tianshan Orogen, and lead to promising implications for depth-dependent deformation in intracontinental orogens worldwide.
Methods
Quality control and harmonic analysis of receiver functions
We collected data from the MANAS network (40 stations)25 and three other stations close to the MANAS network to construct a ~475-km long cross-section with a ~10-km station space across the central Tianshan (Fig. 1a, b). We selected events with Mw ≥ 5.0 at an epicentral distance of 30–90° (Fig. 1c) to calculate P-wave receiver functions (RFs) with Gaussian coefficients of 1.0, 2.0, and 3.5 by using the time-domain iterative deconvolution method58. After normalizing both time and amplitude of the RFs to a reference slowness of 6.4 s/° (moveout correction59), all corrected RFs for each station were stacked in bins of 30° back-azimuth within a delay time window of −5–15 s that include Ps phases converted at the Moho (Pms) but exclude the subsequent multiples (PpPms and PsPms + PpSms). We selected reliable RFs according to the quality control procedure proposed by Shen et al.60 and discarded the following traces: (1) with unrealistic amplitudes (out of 0 ~ 1) at zero time; (2) whose products of convolution with the vertical component have a poor fit with the radial component (<80% recovery of the observed radial seismogram); (3) that were significantly different from the corresponding bin-averaged RF (cross-correlation coefficient <0.5). After the quality control process, a reliable, successive RF dataset was established (Supplementary Fig. 1a–c).
We applied the harmonic analysis method60 to extract the azimuthally independent RFs with minimal potential influences of tilting interface and azimuthal anisotropy (Supplementary Fig. 1d–h). The piercing points of the Ps phases at a depth of 60 km sample a circular area with a diameter of 0.5° centered on each station (Fig. 1b), similar to the horizontal grid scale of the Rayleigh wave dispersion (DPs) (0.5° × 0.5° grids) used in this study61. However, the harmonic analysis method may be less effective when the azimuthal coverage of RFs is poor, due to the limits of the distribution of events and data quality. To minimize the bias in estimating the average RF for stations with uneven azimuthal coverage, we calculated bin-averaged RFs within a bin of 30° back-azimuth, and then stacked them to estimate the average RFs and corresponding uncertainties. Subsequently, the average RFs were used in the joint inversion with the DPs. Supplementary Fig. 2b–d present the average RFs with Gaussian coefficients of 1.0, 2.0, and 3.5 for each station, and the Pms phases are traceable continuously along the cross-section.
Joint inversion of receiver function and surface wave dispersion
Based on the results of the ambient noise tomography (0.5° × 0.5° grids) in the Tianshan and the Pamir Plateau61, we interpolated group (6–40 s) and phase velocity (6–42 s) DPs at each station (Supplementary Fig. 2e, f). For the central Tianshan, checkerboard tests indicate that group and phase velocity DPs can well resolve anomalies with a size of 0.5° × 0.5° in the shorter periods and 1.0° × 1.0° in the longer periods (Supplementary Fig. 3a), and posterior errors are <2% for all periods (Supplementary Fig. 3b). In this study, we performed a joint inversion of the interpolated DPs and average RFs to obtain a one-dimensional (1-D) VS model at each station using the Computer Programs in Seismology (CPS, version 3.30) software package62 that is based on an iteratively damped least-squares algorithm35. The VS was set to a constant value of 4.5 km/s in the initial model. We used the smoothed crustal VP/VS ratio for each station by averaging the recent H-κ-c stacking results27 within a distance of 50 km from each station, and set the VP/VS ratio in the upper mantle corresponding to the AK135 model63. The density (ρ) was calculated as a simple approximate from the Nafe-Drake empirical relationship:64 ρ = 1.73 + 0.2VP. The recovery tests using a similar dataset suggest that our datasets and inversion schemes can obtain a robust result down to 120-km depth61.
As shown in Supplementary Fig. 4, the final 1-D VS models are well consistent with the interfaces, especially the Moho, as indicated along raypaths in the individual RFs plots and by the single station CCP stacking. The synthetic RFs and DPs calculated from the final 1-D VS models of the joint inversion fit well with the observed ones. To evaluate the errors of the final model, we used resampled DPs and RFs as input to the same inverse procedure described above for 200 times. The resampled DPs and RFs were generated by adding Gaussian random noise with a standard deviation corresponding to the posterior error (Supplementary Fig. 3b) and the difference between the raw RFs and harmonic RFs (Supplementary Fig. 1d), respectively. The average values of the 200 VS models are similar to the final 1-D VS model with small uncertainties (standard deviation <1%) at depths shallower than 120 km (Supplementary Fig. 4).
The 1-D VS models at all stations inverted by the above-mentioned scheme (Supplementary Fig. 2g) were assembled to construct the final two-dimensional (2-D) VS model along the cross-section. A most prominent feature resolved by our VS model is the contrasting crustal structure across the Tianshan orogen, i.e., an extensive low-VS (~3.4 km/s) middle-lower crust beneath the STAC, whereas low-VS anomalies (~3.5 km/s) in the middle-lower crust confined within several bands beneath the NA and the IKA (Fig. 2d). Three elongate low-VS anomalies, which can be easily recognized in the 2-D VS model beneath stations KARD, BESM, and SOUR (Fig. 2d), are located at depths of ~20–50 km as seen in the 1-D VS models, respectively (Supplementary Figs. 4b–d). To test the robustness of the low-VS anomalies, we modified the 1-D VS models of stations KARD, BESM, and SOUR, by excluding the crustal low-VS anomalies, and calculated synthetic RFs and DPs. We find significant differences between the synthetic and observed DPs, and the synthetic RFs from the modified models fail to fit the negative Ps phases at ~3–4 s (Supplementary Fig. 5a–c). These large mismatches between the observed and calculated RFs and DPs indicate the reliability of the low-VS anomalies in our VS model. We also performed robustness tests of the mantle lid structure imaged beneath the STAC and the NA (Fig. 2d). Both synthetic DPs from the final and the modified 1-D VS models are similar to the observed ones, but the synthetic RFs from the modified models, by excluding the high-VS mantle lid at depths of ~50–80 km, fail to fit the Ps phases at ~6–8 s (Supplementary Fig. 5d, e). These features indicate that the mantle lid structure is also reliable although DPs used in this study have a limited resolution of the mantle structure.
Common conversion points stacking of receiver functions
Referring to the final 1-D VS model at each station, we projected the reliable RFs into the depth domain, and use the CCP stacking technique36 to image the geometry of the Moho and intracrustal interfaces. Due to the VP/VS ratio being fixed during the joint inversion, the VP/VS ratios at each station used in the CCP stacking are the same as we set in the initial model of the joint inversion, which are smoothed from previous H-κ-c stacking results in the crust27 and correspond to the AK135 model in the upper mantle63. We constructed CCP stacked RF images with different Gaussian parameters (i.e., 1.0, 2.0, and 3.5) to distinguish a true interface, which should be consistent in different frequency bands. The Moho is visible as a strong positive Ps phase in all three CCP images with depths between ~45 km and ~70 km (Supplementary Fig. 6). Referring to the same velocity model at each station, we also constructed CCP images using multiples (i.e., PpPs phases) that reverberated between the free surface and interfaces in the crust and upper mantle. Given the fact that the PpPs phases exhibit weaker sensitivities to the VP/VS ratio than the Ps phases, the consistency in Moho depths of the CCP images constructed with the PpPs phases and the Ps phases confirms the reliability of the CCP images and indicates the suitability of the VP/VS ratio used in the inversion of the VS model (Supplementary Fig. 7).
Besides the Moho, our CCP images constructed with Ps phases also reveal clear but intermittent intracrustal signals (Supplementary Fig. 6). The marked intracrustal signals are traceable in the image of individual RFs traces and in the CCP images with different stacked-bin parameters (2.5, 5.0, and 7.5 km), which largely excludes the possibility that the intracrustal signals are derived from noise or scattering (Supplementary Fig. 8). Moreover, the CCP images produced by a fraction (20% and 60%) of reliable RFs are consistent with those made by the entire dataset, implying that the effect caused by an uneven data distribution or anisotropy structure is negligible (Supplementary Fig. 9). We undertook some synthetic tests to check the reliability of the intracrustal Ps phases. We constructed the synthetic model at each station by overlaying the final 1-D model of VS and VP/VS ratio at depths shallower than 10 and 20 km, respectively, on a homogeneous half-space model (Supplementary Fig. 10b, d). Then, we synthesized RFs with the same data coverage as the real dataset, and constructed synthetic CCP images by using the same processing parameters as used for the real dataset (Supplementary Fig. 10c, e). The significant negative Ps phases at depths of 10–20 km beneath the Tarim Basin and Kazakh Shield are clearly generated by the effect of the sedimentary layer, but not by real velocity discontinuities. Except for these artifact signals in the northern and southern ends of the cross-section, synthetic CCP images keep their purities across the Tianshan. These tests strongly suggest that the marked intracrustal Ps phases (Fig. 2c, d; Supplementary Figs. 6–9) in the CCP images are robust. Thus, the discussion and interpretation in this study focused on these reliable features mostly in the Tianshan, but not at the ends of the cross-section.
Balanced cross-section estimates of N–S shortening across the Tianshan
The VS model and CCP images collectively reveal a thrusting Moho geometry along the cross-section (Fig. 2c, d). Because the peneplanation in the Tianshan is generally inferred to have developed during the Mesozoic tectonic quiescence44, the Moho segments and thrusts imaged in this study can be used as a marker for estimating the amount of N–S shortening across the Tianshan in response to the India-Asia collision in the Cenozoic. Assuming the Moho beneath Tianshan was flat before the Cenozoic intracontinental deformation, we estimate that the N–S width before the deformation of the imaged region was ~560 km by summing the lengths of each Moho segment, which indicates ~85-km N–S shortening when considering the ~475-km width at present (Fig. 2e). It should be noted that a balanced cross-section of the Moho length should represent the minimum estimate because of the limited resolution of seismic images on some small-scale thrusts or doublets. Furthermore, we assume that the crustal volume remained constant during the Cenozoic deformation, and that the Tianshan had a ∼40-km thick crust before the Cenozoic, as indicated by the P‐T equilibration conditions of xenoliths49 and by the present-day Moho depth beneath the Tarim Craton and the Kazakh Shield (Fig. 2c, d). The present-day crustal area of ~2.42 × 104 km2 imaged along the 2-D cross-section implies a crustal dimension of ~605-km N–S width and ~40-km thickness before the Cenozoic deformation, and thus indicates ~130-km N–S shortening across the Tianshan in the Cenozoic. Given the variation of previous crustal thicknesses and the erosion of the uplifted area, the N–S shortening estimated by balancing the crustal thickening also has some uncertainties. We consider these balanced cross-section estimates as a first-order indication of the N–S shortening of a hundred kilometers across the Tianshan. Consequently, considering the present-day N–S shortening rates of ~12–15 mm/yr suggested by Late Quaternary fault slip rates and GPS observations across the estimated section (Fig. 2a, b), the N–S shortening of ~85–130 km implies a start time of ~11–6 Ma for the significant N–S shortening across the Tianshan.
Data availability
The data of the seismic stations used in this study are available through the Data Management Center of the Incorporated Research Institutions for Seismology (IRIS DMC), stations from network MANAS (XP) at https://doi.org/10.7914/SN/XP_2005; station ARLS from network KR at https://doi.org/10.7914/SN/KR; and stations TERE and TGMT from network XW at https://doi.org/10.7914/SN/XW_1997.
Code availability
The Computer Programs in Seismology (CPS, version 3.30) software package is available from the Saint Louis University Earthquake Center (http://www.eas.slu.edu/eqc/eqccps.html). The common conversion points (CCP) stacking code is available from the author, Prof. Lupei Zhu, at his homepage http://www.eas.slu.edu/People/LZhu/home.html.
References
Dewey, J. F. & Bird, J. M. Mountain belts and the new global tectonics. J. Geophys. Res. 75, 2625–2647 (1970).
Raimondo, T., Hand, M. & Collins, W. J. Compressional intracontinental orogens: ancient and modern perspectives. Earth-Sci. Rev. 130, 128–153 (2014).
Şengör, A. M. C., Natal’in, B. A. & Burtman, V. S. Evolution of the Altaid tectonic collage and Palaeozoic crustal growth in Eurasia. Nature 364, 299–307 (1993).
Xiao, W., Windley, B. F., Allen, M. B. & Han, C. Paleozoic multiple accretionary and collisional tectonics of the Chinese Tianshan orogenic collage. Gondwana Res. 23, 1316–1341 (2013).
Windley, B. F., Alexeiev, D., Xiao, W., Kröner, A. & Badarch, G. Tectonic models for accretion of the Central Asian Orogenic Belt. J. Geol. Soc. 164, 31–47 (2007).
Tapponnier, P. & Molnar, P. Active faulting and cenozoic tectonics of the Tien Shan, Mongolia, and Baykal regions. J. Geophys. Res. Solid Earth 84, 3425–3459 (1979).
Hendrix, M. S. et al. Sedimentary record and climatic implications of recurrent deformation in the Tian Shan: evidence from Mesozoic strata of the north Tarim, south Junggar, and Turpan basins, northwest China. Geol. Soc. Am. Bull. 104, 53–79 (1992).
Cunningham, D., Owen, L. A., Snee, L. W. & Li, J. Structural framework of a major intracontinental orogenic termination zone: the easternmost Tien Shan, China. J. Geol. Soc. Lond. 160, 575–590 (2003).
England, P. & Houseman, G. Role of lithospheric strength heterogeneities in the tectonics of Tibet and neighbouring regions. Nature 315, 297–301 (1985).
Neil, E. A. & Houseman, G. A. Geodynamics of the Tarim Basin and the Tian Shan in central Asia. Tectonics 16, 571–584 (1997).
Huangfu, P. et al. India-Tarim lithospheric mantle collision beneath western Tibet controls the Cenozoic building of Tian Shan. Geophys. Res. Lett. 48, e2021GL094561 (2021).
Sun, J., Li, Y., Zhang, Z. & Fu, B. Magnetostratigraphic data on Neogene growth folding in the foreland basin of the southern Tianshan mountains. Geology 37, 1051–1054 (2009).
Abdulhameed, S. et al. Tajik Basin and Southwestern Tian Shan, Northwestern India-Asia collision zone: 2. Timing of basin inversion, Tian Shan mountain building, and relation to Pamir-Plateau advance and deep India-Asia indentation. Tectonics 39, e2019TC005873 (2020).
Jia, Y., Sun, J., Lü, L., Pang, J. & Wang, Y. Late Oligocene-Miocene intra-continental mountain building of the Harke Mountains, southern Chinese Tian Shan: evidence from detrital AFT and AHe analysis. J. Asian Earth Sci. 191, 104198 (2020).
Zheng, Y. & Wu, F. The timing of continental collision between India and Asia. Sci. Bull. 63, 1649–1654 (2018).
Yin, A. Cenozoic tectonic evolution of Asia: a preliminary synthesis. Tectonophysics 488, 293–325 (2010).
Agard, P. et al. Zagros orogeny: a subduction-dominated process. Geol. Mag. 148, 692–725 (2011).
Stern, R. J., Moghadam, H. S., Pirouz, M. & Mooney, W. The geodynamic evolution of Iran. Annu. Rev. Earth Planet. Sci. 49, 9–36 (2021).
Roecker, S. W. et al. Three-dimensional elastic wave velocity structure of the western and central Tien Shan. J. Geophys. Res. Solid Earth 98, 15779–15795 (1993).
Lei, J. & Zhao, D. Teleseismic P-wave tomography and the upper mantle structure of the central Tien Shan orogenic belt. Phys. Earth Planet. Inter. 162, 165–185 (2007).
Li, Z. W. et al. Tomographic image of the crust and upper mantle beneath the western Tien Shan from the MANAS broadband deployment: possible evidence for lithospheric delamination. Tectonophysics 477, 49–57 (2009).
Abdrakhmatov, K. Y. et al. Relatively recent construction of the Tien Shan inferred from GPS measurements of present-day crustal deformation rates. Nature 384, 450–453 (1996).
Zubovich, A. V. et al. GPS velocity field for the Tien Shan and surrounding regions. Tectonics 29, TC6014 (2010).
Vinnik, L. P. et al. Crust and mantle of the Tien Shan from data of the receiver function tomography. Izv. Phys. Solid Earth 42, 639–651 (2006).
Makarov, V. I. et al. Underthrusting of Tarim beneath the Tien Shan and deep structure of their junction zone: main results of seismic experiment along MANAS Profile Kashgar-Song-Köl. Geotectonics 44, 102–126 (2010).
Gilligan, A., Roecker, S. W., Priestley, K. F. & Nunn, C. Shear velocity model for the Kyrgyz Tien Shan from joint inversion of receiver function and surface wave data. Geophys. J. Int. 199, 480–498 (2014).
Zhang, B. F., Bao, X. W. & Xu, Y. X. Distinct orogenic processes in the South- and North-Central Tien Shan from receiver functions. Geophys. Res. Lett. 47, e2019GL086941 (2020).
Thompson, S. C. et al. Late quaternary slip rates across the central Tien Shan, Kyrgyzstan, central Asia. J. Geophys. Res. Solid Earth 107, 2203 (2002).
Kumar, P., Yuan, X., Kind, R. & Kosarev, G. The lithosphere-asthenosphere boundary in the Tien Shan-Karakoram region from S receiver functions: evidence for continental subduction. Geophys. Res. Lett. 32, L07305 (2005).
Rai, S. S. et al. Configuration of the Indian Moho beneath the NW Himalaya and Ladakh. Geophys. Res. Lett. 33, L15308 (2006).
Zhao, J. M. et al. The boundary between the Indian and Asian tectonic plates below Tibet. Proc. Natl Acad. Sci. USA 107, 11229–11233 (2010).
Schneider, F. M. et al. Seismic imaging of subducting continental lower crust beneath the Pamir. Earth Planet. Sci. Lett. 375, 101–112 (2013).
Xu, Q. et al. Deep crustal contact between the Pamir and Tarim basin deduced from receiver functions. Geophys. Res. Lett. 48, e2021GL093271 (2021).
Zhao, J. et al. Clockwise rotation of the Tarim basin driven by the Indian plate impact. Earth Sci. Subsoil Use 42, 425–436 (2019).
Julià, J., Ammon, C. J., Herrmann, R. B. & Correig, A. M. Joint inversion of receiver function and surface wave dispersion observations. Geophys. J. Int. 143, 99–112 (2000).
Zhu, L. Crustal structure across the San Andreas Fault, southern California from teleseismic converted waves. Earth Planet. Sci. Lett. 179, 183–190 (2000).
Kreemer, C., Blewitt, G. & Klein, E. C. A geodetic plate motion and Global Strain Rate Model. Geochem. Geophys. Geosystems 15, 3849–3889 (2014).
Piazolo, S., Daczko, N. R., Silva, D. & Raimondo, T. Melt-present shear zones enable intracontinental orogenesis. Geology 48, 643–648 (2020).
Huang, G. D., Roecker, S. W., Levin, V., Wang, H. & Li, Z. Dynamics of intracontinental convergence between the western Tarim basin and central Tien Shan constrained by centroid moment tensors of regional earthquakes. Geophys. J. Int. 208, 561–576 (2017).
Bielinski, R. A. et al. Lithospheric heterogeneity in the Kyrgyz Tien Shan imaged by magnetotelluric studies. Geophys. Res. Lett. 30, 1806 (2003).
England, P. & Molnar, P. Rheology of the lithosphere beneath the central and western Tien Shan. J. Geophys. Res. Solid Earth 120, 3803–3823 (2015).
Li, Y. et al. Shear wave velocity structure of the crust and upper mantle underneath the tianshan orogenic belt. Sci. China Ser. Earth Sci. 50, 321–330 (2007).
Li, J. et al. Mantle subduction and uplift of intracontinental mountains: a case study from the Chinese Tianshan Mountains within Eurasia. Sci. Rep. 6, 28831 (2016).
Morin, J. et al. Planation surfaces of the Tian Shan range (Central Asia): insight on several 100 million years of topographic evolution. J. Asian Earth Sci. 177, 52–65 (2019).
van Hinsbergen, D. J. J. et al. Reconstructing greater India: paleogeographic, kinematic, and geodynamic perspectives. Tectonophysics 760, 69–94 (2018).
Stearns, M. A. et al. Synchronous Oligocene–Miocene metamorphism of the Pamir and the north Himalaya driven by plate-scale dynamics. Geology 41, 1071–1074 (2013).
Soret, M., Larson, K. P., Cottle, J. & Ali, A. How Himalayan collision stems from subduction. Geology 49, 894–898 (2021).
Li, C., Van der Hilst, R. D., Meltzer, A. S. & Engdahl, E. R. Subduction of the Indian lithosphere beneath the Tibetan Plateau and Burma. Earth Planet. Sci. Lett. 274, 157–168 (2008).
Shaffer, M., Hacker, B. R., Ratschbacher, L. & Kylander-Clark, A. R. C. Foundering triggered by the collision of India and Asia captured in xenoliths. Tectonics 36, 1913–1933 (2017).
Craig, T. J., Copley, A. & Jackson, J. Thermal and tectonic consequences of India underthrusting Tibet. Earth Planet. Sci. Lett. 353–354, 231–239 (2012).
Molnar, P. & Stock, J. M. Slowing of India’s convergence with Eurasia since 20 Ma and its implications for Tibetan mantle dynamics. Tectonics 28, TC3001 (2009).
Chen, Y. H., Roecker, S. W. & Kosarev, G. L. Elevation of the 410 km discontinuity beneath the central Tien Shan: evidence for a detached lithospheric root. Geophys. Res. Lett. 24, 1531–1534 (1997).
Tian, X., Zhao, D., Zhang, H., Tian, Y. & Zhang, Z. Mantle transition zone topography and structure beneath the central Tien Shan orogenic belt. J. Geophys. Res. Solid Earth 115, B10308 (2010).
Simonov, V. A., Mikolaichuk, A. V., Safonova, I. Y., Kotlyarov, A. V. & Kovyazin, S. V. Late Paleozoic–Cenozoic intra-plate continental basaltic magmatism of the Tienshan–Junggar region in the SW Central Asian Orogenic belt. Gondwana Res. 27, 1646–1666 (2015).
Bagdassarov, N., Batalev, V. & Egorova, V. State of lithosphere beneath Tien Shan from petrology and electrical conductivity of xenoliths. J. Geophys. Res. 116, B01202 (2011).
Oreshin, S., Vinnik, L., Peregoudov, D. & Roecker, S. Lithosphere and asthenosphere of the Tien Shan imaged by S receiver functions. Geophys. Res. Lett. 29, 1191 (2002).
Houseman, G. & Molnar, P. Mechanisms of lithospheric rejuvenation associated with continental orogeny. Geol. Soc. Lond. Spec. Publ. 184, 13–38 (2001).
Ligorría, J. P. & Ammon, C. J. Iterative deconvolution and receiver-function estimation. Bull. Seismol. Soc. Am. 89, 1395–1400 (1999).
Yuan, X., Ni, J., Kind, R., Mechie, J. & Sandvol, E. Lithospheric and upper mantle structure of southern Tibet from a seismological passive source experiment J. Geophys. Res. Solid Earth 102, 27491–27500 (1997).
Shen, W., Ritzwoller, M. H., Schulte-Pelkum, V. & Lin, F. C. Joint inversion of surface wave dispersion and receiver functions: a Bayesian Monte-Carlo approach. Geophys. J. Int. 192, 807–836 (2013).
Li, W., Chen, Y., Tan, P. & Yuan, X. Geodynamic processes of the continental deep subduction: constraints from the fine crustal structure beneath the Pamir plateau. Sci. China Earth Sci. 63, 649–661 (2020).
Herrmann, R. B. Computer programs in seismology: an evolving tool for instruction and research. Seismol. Res. Lett. 84, 1081–1088 (2013).
Kennett, B. L. N., Engdahl, E. R. & Buland, R. Constraints on seismic velocities in the Earth from traveltimes. Geophys. J. Int. 122, 108–124 (1995).
Nafe, J. E. & Drake, C. L. Variation with depth in shallow and deep water marine sediments of porosity, density and the velocities of compressional and shear waves. Geophysics 22, 523–552 (1957).
Engdahl, E. R. et al. ISC-EHB 1964–2016, an improved data set for studies of Earth structure and global seismicity. Earth Space Sci. 7, e2019EA000897 (2020).
Kufner, S. K. et al. Deep India meets deep Asia: lithospheric indentation, delamination and break-off under Pamir and Hindu Kush (Central Asia). Earth Planet. Sci. Lett. 435, 171–184 (2016).
Bloch, W. et al. Structure and stress field of the lithosphere between Pamir and Tarim. Geophys. Res. Lett. 48, e2021GL095413 (2021).
Mohadjer, S., Ehlers, T. A., Bendick, R., Stübner, K. & Strube, T. A quaternary fault database for central Asia. Nat. Hazards Earth Syst. Sci. 16, 529–542 (2016).
Wu, C. et al. Oblique thrust of the maidan fault and late quaternary tectonic deformation in the Southwestern Tian Shan, Northwestern China. Tectonics 38, 2625–2645 (2019).
Wang, M. & Shen, Z. Present‐day crustal deformation of continental China derived from GPS and its tectonic implications. J. Geophys. Res. Solid Earth 125, e2019JB018774 (2020).
Acknowledgements
This research was supported by the Strategic Priority Research Program (B) of the Chinese Academy of Sciences (grant XDB18000000), the National Natural Science Foundation of China (grants 41888101 and 41804056), and the National Key R&D Program of China (grants 2016YFC0600402 and 2017YFC0601206). W.L. was also supported by the China Postdoctoral Science Foundation (grants 2019M650034 and 2020T130650) and the Sino-German (CSC-DAAD) Postdoc Scholarship. This is a contribution to IGCP 662 and 669.
Author information
Authors and Affiliations
Contributions
W.L., in interaction with Y.C. and X.Y., collected and processed the seismic data. W.X. and B.F.W. shaped the tectonic implications of the study. W.X., Y.C., and W.L. developed the initial interpretation. All authors contributed to the writing of the paper.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing interests.
Peer review
Peer review information
Nature Communications thanks Zhong-Hai Li, Xiaotao Yang, and the anonymous reviewer(s) for their contribution to the peer review of this work. Peer reviewer reports are available.
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Li, W., Chen, Y., Yuan, X. et al. Intracontinental deformation of the Tianshan Orogen in response to India-Asia collision. Nat Commun 13, 3738 (2022). https://doi.org/10.1038/s41467-022-30795-6
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467-022-30795-6
- Springer Nature Limited
This article is cited by
-
Upper mantle melt caused by a subducted slab in the Indian-Eurasian continental subduction zone
Communications Earth & Environment (2023)
-
The Alasu rock avalanche in the Tianshan Mountains, China: fragmentation, landforms, and kinematics
Landslides (2023)
-
Joint adjustment of strain rate fields and its application in shallow seismicity forecast in the Sichuan-Yunnan region, China
Acta Geodaetica et Geophysica (2023)