Abstract
The momentum carried by structured light fields exhibits a rich array of surprising features. In this work, we generate transverse orbital angular momentum (TOAM) in the interference field of two parallel and counter-propagating linearly-polarised focused beams, synthesising an array of identical handedness vortices carrying intrinsic TOAM. We explore this structured light field using an optomechanical sensor, consisting of an optically levitated silicon nanorod, whose rotation is a probe of the optical angular momentum, which generates an exceptionally large torque. This simple creation and direct observation of TOAM will have applications in studies of fundamental physics, the optical manipulation of matter and quantum optomechanics.
Similar content being viewed by others
Introduction
Our ability to control the momentum of light, and its transfer to matter, continues to deliver profound technological innovation. Optical confinement and cooling of atoms, earning a Nobel Prize for Chu, Cohen-Tannoudki & Phillips in 19971, is the core of many quantum technologies, and optical tweezers, which earned Ashkin a share of the 2018 Nobel Prize in Physics2, have wide-ranging applications in healthcare, biophysics, and nanotechnology. Optical fields can carry a rich variety of forms of momenta, including optical angular momentum which can drive rotations via light-matter interactions3.
Optical angular momentum itself manifests in many forms. The first distinction is drawn between spin angular momentum (SAM) and orbital angular momentum (OAM). The former originates from the rotation of the electromagnetic field vector, and the latter is the direct analogue of the classical angular momentum defined by L = r × P, where r is the displacement from the coordinate origin and P is the optical linear momentum density4. OAM seems, by definition, to be dependent on the choice of the coordinate system, and so can be called extrinsic. However, intrinsic (coordinate-independent) OAM can be obtained when the integral of the OAM density over space yields a non-zero value regardless of the coordinates chosen. This is the case in optical vortex beams, which exhibit OAM through their wavefronts spiralling around a phase singularity5,6. For paraxial light beams, the intrinsic OAM is longitudinal since L is parallel to the beam’s propagation direction. It is also possible to engineer transverse SAM, via evanescent waves7,8, focused beams9 and multiple wave interference patterns10. Transverse orbital angular momentum (TOAM) is rarely observed, unless we are considering polychromatic fields11,12,13 or extrinsic momentum when a beam propagates away from the coordinate origin14,15. Intrinsic TOAM in monochromatic fields, appearing as intricate transverse phase singularity vortex lines, has been theoretically described in the near-field of the diffraction by sharp obstacles or slits16,17 and in superimposed co-propagating beams with different beam-widths and/or amplitudes18,19,20.
In this work, we present the first realisation of intrinsic TOAM. We create an optical angular momentum structure using two monochromatic offset counter-propagating beams, which carries both transverse SAM and intrinsic TOAM. The light field contains a robust array of synthesised transverse optical vortices. We verify and probe the optical angular momentum structure using a levitated nanoparticle optomechanical sensor21, and demonstrate the tuneable nature of the induced torque.
The rotation of levitated nanoparticles via longitudinal SAM has recently been the focus of several studies22,23,24,25,26,27. In this work, we produce a torque five orders of magnitude larger than previously demonstrated, driving MHz rotation at 10 mbar of background gas pressure. The rotation of levitated particles has applications in torque sensing23,26, studies of vacuum friction28,29 and the exploration of macroscopic quantum physics30,31. The orbit of nanospheres via longitudinal OAM has been studied32, and the presence of transverse SAM in focused circularly polarised light incident upon a microparticle has been inferred33.
Our work presents a straightforward and robust method for generating intrinsic TOAM, the use of levitated nanoparticles as sensitive probes of structured light fields, and the first manipulation of particle motion using TOAM. The ability to fully control the alignment and rotation of nanoparticles levitated in vacuum is of great importance for cavity optomechanics34, alignment of targets in high-energy beam experiments and quantum control at the nanoscale31.
Results
Origin of the TOAM
We consider an illumination geometry consisting of two counter-propagating Gaussian beams with the same frequency ω and both linearly polarised in the y direction (see Fig. 1). The waist plane of each beam is located at z = 0, and the positions of their axes are (0, ±δ, 0). Assuming the time-dependence factor e−iωt, one may analytically express the transverse electric and magnetic fields as,
where
is the Gaussian beam solution to the scalar Helmholtz equation in the slow-varying approximation35. Here, E0 is a constant field amplitude, k = 2π/λ is the wavenumber, w0 = w(z = 0) is the beam waist radius, q(z) = z − iz0 and \(\varphi (z)={\tan }^{-1}\left(z/{z}_{0}\right)\) the Gouy phase, with \({z}_{0}=\left(\pi {w}_{0}^{2}\right)/\lambda\) being the Rayleigh range.
Optical vortices stem from phase dislocations36. It can be proven (see Methods) that the phase dislocations of Ey and Bx in Eq. (1) occur when the beam offset is non-zero (2δ ≠ 0), along a series of singularity lines which lie on the y = 0 plane and take the values of (x, z) that satisfy the following equation,
where n takes odd and even integer values for electric and magnetic field singularities, respectively. This constitutes an array of alternating electric and magnetic field singularities.
As an illustration, Fig. 2 shows the calculated field characteristics for a beam offset 2δ = 1.0 μm; the wavelength and waist radius are set to λ = 1550 nm and w0 = 1.0 μm, corresponding to beams focused with numerical aperture NA = 0.6. Both the electric and magnetic fields exhibit an intensity profile typical of standing waves: the positions of the electric field nodes (Fig. 2a) coincide with those of the magnetic field antinodes (Fig. 2b). The lines passing through the planes represent the location of the phase dislocations, namely, the solutions to Eq. (3) for −6 ≤ n ≤ 6. They stretch transversely along the x direction, and pass through the nodes of the electric and magnetic fields for odd and even n, respectively.
From the phase profile (Fig. 2c), we can clearly identify the dislocation points for the electric and magnetic fields. For each point, the strength (a.k.a., topological charge) is −1, because the phase increases by 2π in a negative circuit with respect to the +x direction. Therefore, the field carries a net OAM in the −x direction. The black and white arrows show the electric Pe and magnetic Pm parts of the orbital momentum density4:
which, together with the position vector r, defines the density of OAM: L = r × P. Around the dislocation points, Pe and Pm circulate in the same sense, such that all the phase vortices are of the same handedness. The existence of TOAM in this illumination is simple to understand if we imagine an extended particle, such as our rod, placed at the origin (Fig. 1): roughly speaking, opposite ends of the rod will be pushed (via an optical pressure force caused by each beam’s orbital momentum density P) in opposite directions, generating a torque on the particle. This torque is therefore enabled by the transverse nature of the OAM density (see Supplementary Information Section A & B, and Supplementary Movie 1 for more details).
The integral OAM carried by the field, 〈L〉, is intrinsic since it is independent of the choice of origin; for a translational transformation of the coordinates r → r + r0, there is no change since 〈L〉 → 〈L〉 + r0 × 〈P〉 = 〈L〉, where we invoke that the integral momentum 〈P〉 = 0 due to the counter-propagating configuration of the two beams. Each of the Gaussian beams, considered separately, would possess a transverse extrinsic TOAM due to their propagation axis not crossing the origin. However, when taken together, their common centroid lies exactly in the origin, and no extrinsic TOAM exists. The extrinsic TOAM that would be carried by the beams if considered separately is expressed as intrinsic TOAM when the beams are taken together, and readily manifests itself in the appearance of the robust array of transverse phase vortices - for this reason we describe the vortices carrying intrinsic TOAM as synthetic.
So far we have not considered the longitudinal fields which, according to Maxwell equations, can be expressed in the post-paraxial approximation as,
These would be negligible in the case of weak focusing, however in moderate or strong focusing, they provide further interesting phenomena. The coexistence of both longitudinal and transverse fields can give rise to a circular polarisation in a plane transverse to the propagation, namely transverse SAM. The dual-symmetric SAM density of electromagnetic fields read10, \({{{{{{{\bf{S\;={S}}}}}}}^{{{{{{{{\rm{e}}}}}}}}}+{S}^{{{{{{{{\rm{m}}}}}}}}}}}=\frac{1}{4\omega }{{{{\Im }}}}\left\{{\varepsilon }_{{{{{{{{\rm{0}}}}}}}}}{{{{{{{{\bf{E}}}}}}}}}^{*}\times {{{{{{{\bf{E}}}}}}}}+{\mu }_{{{{{{{{\rm{0}}}}}}}}}^{-1}{{{{{{{{\bf{B}}}}}}}}}^{*}\times {{{{{{{\bf{B}}}}}}}}\right\}.\) In our beam setup, with the individual beam linear polarisation direction parallel to the direction of beam offset (y), the spin on the x = 0 plane is purely electric and has an x-component only, \({S}_{x}={S}_{x}^{{{{{{{{\rm{e}}}}}}}}}\,{{{{\propto }}}}\,\Im \left\{{E}_{y}^{*}{E}_{z}\right\}\). The calculated spin is shown in the Supplementary Information Section C, where we also visualise the polarisation state of the local electric field ellipse, with circular polarisations appearing at the field nodes. The spin exhibits a magnitude distribution similar to the electric field intensity, with a negative x-component of the spin near the intensity maxima.
Transverse rotation measurements
We probe the structured transverse optical momentum using a levitated optomechanical sensor. The force and torque acting on small dipolar scatterers can be directly associated with the field gradients and the local densities of optical linear and angular momenta in the illumination. In contrast, the optomechanical sensor used in our experiment is a silicon nanorod whose size is comparable to the optical wavelength, and its internal resonances can develop electric and magnetic high-order multipoles that interact with the incident fields. As a result, an intuitive description of the torque on the nanorod in this complex structured wavefield is not simple, and we resort to modelling the torque using numerical techniques. Newton’s second law of motion dictates that any change in linear/angular momentum invokes a force/torque. This principle leads to an induced torque on any particle within an optical field carrying OAM and SAM which we calculate using Maxwell’s Stress Tensor, see Methods. The torque experienced by the nanorod is numerically computed for different positions of the nanorod on the y-z plane, with the rod oriented along y, and the result is shown in Fig. 2d. The resulting torque is oriented in the −x direction, as expected from the illuminating TOAM, and is strongest at the electric field maxima where the rod is levitated by optical gradient forces. With respect to a possible role of transverse SAM on the rotation, we numerically calculated the torque coming from the flux of the spin and the orbital parts of the angular momentum separately37,38, showing that the SAM torque is negligible compared to the OAM torque (see Supplementary Information Section D).
Two linearly polarised (along the y axis), counter-propagating laser beams are focused inside a vacuum chamber to form an optical trap (Fig. 3a), with the ability to introduce a separation δ{x, y} in the {x, y} directions respectively. We levitate silicon nanorods (Fig. 3c) and are able to track their motion in five degrees of freedom (Fig. 3b): three translational {x, y, z} and two angular {α, β}.
When a separation ∣δy∣ > 0 is introduced, intrinsic TOAM is generated at the optical antinode, where the nanorod is trapped. The optical OAM is transferred to the nanorod, driving it to rotate. This is evident in the frequency spectrum of the nanorod motion, where rotation at MHz rates frot is detected (Fig. 3d), while the translational degrees-of-freedom remain harmonically confined with frequencies f{x, y, z}. The frot spectral feature is broad due to low-frequency drifts in the system22 over the 10 s in which this data was acquired. When δx = δy = 0, there is no rotation, and the nanorod is harmonically confined in all five degrees-of-freedom (Fig. 3e). When rotating, there is no confinement in the β direction, since this is the plane of rotation, and the motion in the α direction is gyroscopically stabilised22.
The rotation rate of the nanorod is set by the balance between the optically induced torque N and the damping due to the presence of gas Γ22:
where \(I=\left(M{l}^{2}\right)/12\) is the moment of inertia, l is the nanorod’s length, and M its mass. Since Γ is known39, the rotation rate is a probe of the torque induced by TOAM. We compare to the theoretically calculated torque (see Methods) by measuring the variation in torque as δy is varied, and note a maximum in N for a finite separation ∣δy∣ > 0, in Fig. 3f, where the predicted torque is shown in the inset and by the solid line. If the rotation were simply due to the transfer of momentum from a single beam (e.g., in circularly polarised light) the maximum rotation rate would be when the optical intensity was a maximum (δy = 0).
As ∣δy∣ is decreased, there is a transition from rotation (Fig. 3g, top panel) to harmonic confinement (middle panel) when the torque isn’t large enough to overcome the optical potential which causes the nanorods to align along the polarisation direction. At the boundary, we observe bistable dynamics as stochastic forces due to collisions with gas molecules periodically drive the nanorod into rotation (lower panel). For finite ∣δy∣, a separation along the x direction yields a single maximum at ∣δx∣ = 0 (Fig. 3h), as predicted (solid line & inset).
We observe that the rotation frequency of the nanorod due to the TOAM depends linearly on the gas pressure (Fig. 3i, blue points), which would not be the case for a motional frequency due to harmonic confinement22. Since the TOAM has a topological charge of −1, it would be expected that the optical torque is the same as for a particle exposed to circularly polarised light, which we confirm in Fig. 3i (red squares), where the separation is reduced to δ{x, y} = 0 and the polarisation of each beam is switched to circular. By comparing to the literature25,26,27, we note that the maximal torque we induce on our silicon nanorods (~3 × 10−18 Nm) is five orders of magnitude larger than previously observed for particles levitated in vacuum. This is due to the shape-enhanced susceptibility of our nanorods22 as compared to nanospheres, ellipsoids, or nano-dumbells previously studied. Throughout this analysis, δz (i.e., the longitudinal separation of the two beam foci) is assumed to be zero. Supplementary Information Section E discusses the impact of δz on the optical torque.
Discussion
In this work, we have presented a straightforward method for synthesising a robust and stationary array of optical vortices carrying intrinsic TOAM, and carried out a unique study of this exotic optical orbital angular momentum using a levitated optomechanical sensor as a probe. Being able to exert significant optical forces transverse to the propagation direction of free-space beams, without the need to have critical optical alignment, localised interference patterns, or polychromatic light, provides a powerful new tool for the optical manipulation of matter. Our work represents the first use of levitated particles as probes of structured light fields, exploiting the anisotropy of our nanorods to measure optically induced torque. By levitating the particle in a separate optical tweezers, the optical field could be mapped in three dimensions. The fact that the field structure can be sensitively detected by the particle probe opens the opportunity for the application of reactive quantities40,41,42,43 in levitated optomechanics.
Furthermore, we have introduced an exciting new method for the precise optical control of nanoparticles levitated in vacuum21, where the intrinsic nature of the TOAM and still-present optical trap at the electric field antinode enables the control of alignment and rotation without driving orbits. This new way of manipulating nanoparticles will be instrumental in cavity optomechanics34 and the quantum control and exploitation of rotation31. The large optical torque we exert on the levitated silicon nanorods will enable sensitive torque sensing26, and the transverse direction of the particle’s angular momentum will allow the rotating particle to be brought close to surfaces to measure quantum friction44, lateral Casimir45, and other short-range forces46.
Methods
Phase structure evaluation
The phase singularities arising in the electric and magnetic fields of Eq. (1) can be analytically found. In fact, the phases of the electric and magnetic field, ϕe and ϕm, can be written as
where
with r2 = x2 + y2.
For δ = 0, ϕe and ϕm are constant, and thus the phase profile will be planar. This is the expected result for a standing wave. The appearance of a phase singularity or dislocation, which is the physical origin of phase vortices, requires δ ≠ 0, and
for electric field singularities, or
for magnetic field singularities36. The intersection lines of y = 0 and Eq. (3) are the solutions to Eq. (9) for odd n and to Eq. (10) when n is even.
Numerical simulations and calculations
A particle can experience optical forces by either absorbing or scattering light, as accounted for by the Maxwell stress tensor (MST) \(\mathop{{{{{{{{\bf{T}}}}}}}}}\limits^{\leftrightarrow}\) which represents the overall time-averaged flow of momentum in an electromagnetic field42,47,48,
where ⊗ corresponds to an outer product, and \(\overleftrightarrow{{{{{{{{\bf{I}}}}}}}}}\) is the three-dimensional (3D) identity matrix. This can be extended to electromagnetic angular momentum via a cross product with the spatial coordinates \({{{{{{{\bf{r}}}}}}}}\times \mathop{{{{{{{{\bf{T}}}}}}}}}\limits^{\leftrightarrow}\), and the torque is calculated from the surface integral of a closed surface enclosing the particle37,38,49,
where N is the torque, r is the position vector, and \(\hat{{{{{{{{\bf{n}}}}}}}}}\) is the unit vector normal to the surface S.
A calculation of the torque using the MST is a time-consuming process that requires knowing the total electric and magnetic fields incident on, and scattered by, the nanorod. These fields are calculated numerically as described below. The nanorod was approximated as a cylinder, and the relative permittivity of silicon was assumed to be 12.1.
For Fig. 2d, the 3D electric and magnetic fields scattering off the nanorod are required for each pixel in the colourplot, with the nanorod placed at different positions within the structured illumination. In order to do this efficiently, a procedure previously implemented in ref. 50 was followed, in which each beam is decomposed into a collection of plane waves using a spatial Fourier transform. To incorporate the nanomechanical sensor, each plane wave component is then replaced with a numerical simulation of the total fields from a nanorod illuminated with the same plane wave. The nanorod’s cylindrical symmetry is exploited to reduce the number of unique simulations.
The beam is then reconstructed using an inverse Fourier transform and the beam is augmented with the appropriate total scattering of the nanorod51. In this way, the only required numerical simulations are those of the nanorod under plane wave illumination in vacuum at various angles of incidence, easily performed via frequency-domain 3D finite-element-method simulations using the commercial software package CST Microwave Studio (Dassault Systemes). Thanks to the linearity of Maxwell’s equations, the fields for individual plane waves can be combined, with appropriate weighted amplitudes and phases, to synthesise the scattering from any desired structured far-field illumination–a step done in post-processing using Mathworks’s numerical computation software MATLAB–which was applied to synthesise the counter-propagating Gaussian beams. The phases of the plane waves can be adjusted to shift the position of the beams and hence sweep the different nanorod locations. For each location, the end result of this post-processing is the full 3D scattering field of the nanorod in a given position of the optical trap to no approximation beyond numerical accuracy.
Once the 3D fields are obtained, calculating the torque requires performing the integration of Eq. (12) over an arbitrary surface enclosing the nanorod. We chose a cube centred around the nanorod, and varied the cube’s dimensions to ensure convergence of the result.
The theoretical torque lines and insets of Fig. 3f, h are also calculated via this numerical simulation method.
Experimental system
We use a standing wave optical dipole trap formed by two counter-propagating linearly polarised light beams focused inside a vacuum chamber. As illustrated in Fig. 3a, a pair of 1550-nm Gaussian beams (~0.6 W) are focused by two NA = 0.6 lenses (clear aperture 3.60 mm, effective focal length 2.97 mm, Thorlabs 355660-C), such that their foci coincide, and a silicon nanorod is levitated in the antinodes of the resultant standing wavefield. The nanofabricated silicon nanorods (880 nm length and 210 nm diameter, Kelvin Nanotechnology) are grown on a silicon wafer (Fig. 3c) before directly launching to the optical trap by Laser-Induced Acoustic Desorption (LIAD)52 at a pressure of a few millibar. At this point they are deeply and stably confined within one optical antinode of the standing wave trap.
Although the optical field defines where the particles are trapped in the x–y plane, they can be trapped in one of several antinodes of the optical standing wave. The field intensity, and therefore the torque, varies at the different antinodes. Our experimental measurement provides the absolute value of the torque, while our calculations provides the torque at the central antinode normalised by the power carried by the beams. This explains the dual vertical axis in Fig. 3f, h. The nanorods can be translated in the z-direction by changing the relative phase of the two beams, which we achieve by translating one of the fibre out-couplers in the z-direction. The relative phase between the two beams is monitored, but not stabilised, and only has significant noise below 100 Hz, far from any resonance of our trapped particles.
To generate the offset between the two beams, we linearly translate one of the fiber-out-couplers by an amount Δ. The two beams still overlap at the focus, but away from the focus an offset δ is introduced. The translation Δ and the offset δ are linearly proportional to each other53, with a proportionality constant that depends on the position along the z axis. Since we do not know the absolute position along the z axis, we treat this proportionality constant as a free parameter, when comparing theory to data in Fig. 3f, h. This described technique for generating a separation also induces a small angle between the beams (~0.04 rad), which has a negligible effect on the results of our numerical simulations (see Supplementary Information Section F).
Detection methods
We detect the motion of the levitated nanorods using a variety of methods, all based on collecting the light which has passed through the focus of the optical trap (Fig. 3a). More details can be found in ref. 22. The {x, y} motion is measured by imaging the beam onto a quadrant photodiode. The z-motion is monitored using balanced homodyne with light that hasn’t interacted with the particle. This method is sensitive to rotation in the y–z plane, since the intensity of the collected scattered light is strongly dependent on the alignment of the nanorod (Fig. 3d). The {α, β} motion is detected by passing the light through a polarising beam-splitter and performing a balanced detection on the two output ports.
Data availability
Data that support the plots within this paper and other findings of this study are available from the corresponding author upon request.
Code availability
The code used in the present work is available from the corresponding authors upon request.
References
Chu, S. Nobel lecture: the manipulation of neutral particles. Rev. Mod. Phys. 70, 685 (1998).
Ashkin, A. Nobel lecture: optical tweezers and their application to biological systems (2022)
Padgett, M. & Bowman, R. Tweezers with a twist. Nat. Photonics 5, 343 (2011).
Bliokh, K. Y. & Nori, F. Transverse and longitudinal angular momenta of light. Phys. Rep. 592, 1 (2015).
Yao, A. M. & Padgett, M. J. Orbital angular momentum: origins, behavior and applications. Adv. Opt. Photonics 3, 161 (2011).
Ni, J. et al. Multidimensional phase singularities in nanophotonics. Science 374, eabj0039 (2021).
Bliokh, K. Y. & Nori, F. Transverse spin of a surface polariton. Phys. Rev. A 85, 061801 (2012).
Bliokh, K. Y., Bekshaev, A. Y. & Nori, F. Extraordinary momentum and spin in evanescent waves. Nat. Commun. 5, 1 (2014).
Neugebauer, M., Bauer, T., Aiello, A. & Banzer, P. Measuring the transverse spin density of light. Phys. Rev. Lett. 114, 063901 (2015).
Bekshaev, A. Y., Bliokh, K. Y. & Nori, F. Transverse spin and momentum in two-wave interference. Phys. Rev. X 5, 011039 (2015).
Chong, A., Wan, C., Chen, J. & Zhan, Q. Generation of spatiotemporal optical vortices with controllable transverse orbital angular momentum. Nat. Photon. 14, 350 (2020).
Hancock, S. W., Zahedpour, S., Goffin, A. & Milchberg, H. M. Free-space propagation of spatiotemporal optical vortices. Optica 6, 1547 (2019).
Bliokh, K. Y. & Nori, F. Spatiotemporal vortex beams and angular momentum. Phys. Rev. A 86, 033824 (2012).
Aiello, A., Lindlein, N., Marquardt, C. & Leuchs, G. Transverse angular momentum and geometric spin hall effect of light. Phys. Rev. Lett. 103, 100401 (2009).
Bliokh, K. Y. & Nori, F. Relativistic Hall Effect. Phys. Rev. Lett. 108, 120403 (2012).
Braunbek, W. & Laukien, G. Einzelheiten zur halbebenen-beugung. Optik 9, 174 (1952).
Schouten, H. F., Visser, T. D. & Lenstra, D. Optical vortices near sub-wavelength structures. J. Opt. B: Quantum Semiclass. Opt. 6, S404 (2004).
Pas’ ko, V., Soskin, M. & Vasnetsov, M. Transversal optical vortex. Opt. Commun. 198, 49 (2001).
Wang, L.-G., Wang, L.-Q. & Zhu, S.-Y. Formation of optical vortices using coherent laser beam arrays. Opt. Commun. 282, 1088 (2009).
Zhang, Y. et al. Splitting, generation, and annihilation of phase singularities in non-coaxial interference of bessel–gaussian beams. Phys. Scr. 96, 125105 (2021).
Millen, J., Monteiro, T. S., Pettit, R. & Vamivakas, A. N. Optomechanics with levitated particles. Rep. Prog. Phys. 83, 026401 (2020).
Kuhn, S. et al. Full rotational control of levitated silicon nanorods. Optica 4, 356 (2017).
Kuhn, S. et al. Optically driven ultra-stable nanomechanical rotor. Nat. Commun. 8, 1670 (2017).
Ahn, J. et al. Optically levitated nanodumbbell torsion balance and ghz nanomechanical rotor. Phys. Rev. Lett. 121, 033603 (2018).
Reimann, R. et al. GHz rotation of an optically trapped nanoparticle in vacuum. Phys. Rev. Lett. 121, 033602 (2018).
Ahn, J. et al. Ultrasensitive torque detection with an optically levitated nanorotor. Nat. Nanotechnol. 15, 89 (2020).
Jin, Y. et al. 6 GHz hyperfast rotation of an optically levitated nanoparticle in vacuum. Photonics Res. 9, 1344 (2021).
Manjavacas, A. & García de Abajo, F. J. Vacuum friction in rotating particles. Phys. Rev. Lett. 105, 113601 (2010).
Zhao, R., Manjavacas, A., García de Abajo, F. J. & Pendry, J. B. Rotational quantum friction. Phys. Rev. Lett. 109, 123604 (2012).
Stickler, B. A. et al. Probing macroscopic quantum superpositions with nanorotors. N. J. Phys. 20, 122001 (2018).
Stickler, B. A., Hornberger, K. & Kim, M. Quantum rotations of nanoparticles. Nat. Rev. Phys. 3, 589 (2021).
Mazilu, M. et al. Orbital-angular-momentum transfer to optically levitated microparticles in vacuum. Phys. Rev. A 94, 053821 (2016).
Svak, V. et al. Transverse spin forces and non-equilibrium particle dynamics in a circularly polarized vacuum optical trap. Nat. Commun. 9, 5453 (2018).
Schäfer, J., Rudolph, H., Hornberger, K. & Stickler, B. A. Cooling nanorotors by elliptic coherent scattering. Phys. Rev. Lett. 126, 163603 (2021).
Zhan, Q. Cylindrical vector beams: from mathematical concepts to applications. Adv. Opt. Photonics 1, 1 (2009).
Berry, M. & Dennis, M. Phase singularities in isotropic random waves. Proc. R. Soc. Lond. A 456, 2059 (2000).
Nieto-Vesperinas, M. Optical torque: electromagnetic spin and orbital-angular-momentum conservation laws and their significance. Phys. Rev. A 92, 043843 (2015).
Wei, L. & Rodríguez-Fortuño, F. J. Optical multipolar torque in structured electromagnetic fields: on helicity gradient torque, quadrupolar torque, and spin of the field gradient. Phys. Rev. B 105, 125424 (2022).
Martinetz, L., Hornberger, K. & Stickler, B. A. Gas-induced friction and diffusion of rigid rotors. Phys. Rev. E 97, 052112 (2018).
Xu, X. & Nieto-Vesperinas, M. Azimuthal imaginary poynting momentum density. Phys. Rev. Lett. 123, 233902 (2019).
Nieto-Vesperinas, M. & Xu, X. Reactive helicity and reactive power in nanoscale optics: evanescent waves. kerker conditions. optical theorems and reactive dichroism. Phys. Rev. Res. 3, 043080 (2021).
Nieto-Vesperinas, M. & Xu, X. The complex maxwell stress tensor theorem: the imaginary stress tensor and the reactive strength of orbital momentum. a novel scenery underlying electromagnetic optical forces. Light Sci. Appl. 11, 297 (2022).
Zhou, Y. et al. Observation of high-order imaginary poynting momentum optomechanics in structured light. Proc. Natl. Acad. Sci. 119, e2209721119 (2022).
Volokitin, A. I. & Persson, B. N. J. Quantum friction. Phys. Rev. Lett. 106, 094502 (2011).
Manjavacas, A., Rodríguez-Fortuño, F. J., De Abajo, F. J. G. & Zayats, A. V. Lateral casimir force on a rotating particle near a planar surface. Phys. Rev. Lett. 118, 133605 (2017).
Moore, D. C. & Geraci, A. A. Searching for new physics using optically levitated sensors. Quantum Sci. Technol. 6, 014008 (2021).
Jackson, J. D., Classical Electrodynamics, 3rd ed. (John Wiley & Sons, Inc, Hoboken, 1999)
Novotny, L. and Hecht, B., Principles of Nano-Optics, 1st edn. (Cambridge University Press, New York, 2006)
Nieto-Vesperinas, M. Optical torque on small bi-isotropic particles. Opt. Lett. 40, 3021 (2015).
Afanasev, A., Kingsley-Smith, J. J., Rodríguez-Fortuño, F. J., and Zayats, A. V., Non-diffractive 3d polarisation features of optical vortex beams, arXiv https://arxiv.org/abs/2208.08833 (2022).
Kingsley-Smith, J. J. and Rodríguez-Fortuño, F. J., Efficient post-processing of electromagnetic plane wave simulations to model arbitrary structured beams incident on axisymmetric structures, arXiv https://arxiv.org/abs/2302.04203 (2023).
Nikkhou, M., Hu, Y., Sabin, J. A. & Millen, J. Direct and clean loading of nanoparticles into optical traps at millibar pressures. Photonics 8, 458 (2021).
Yoshida, A. & Asakura, T. Focusing properties of an off-axis gaussian beam. Opt. Laser Technol. 11, 49 (1979).
Acknowledgements
We thank Dr. Steven Simpson for useful early discussions. XX acknowledges the National Natural Science Foundation of China (12274181, 11804119), and Guangdong Basic and Applied Basic Research Foundation (2023A1515030143). J.M. recognises support from the European Research Council Grant Agreement Nos. 803277 & 957463 and Royal Society Research Grant RGS\R1\201096. J.J.K.S. and F.J.R.F. recognise support from the European Research Council Starting Grant No. ERC-2016-STG-714151-PSINFONI.
Author information
Authors and Affiliations
Contributions
Y.H. built the experiment, took and analysed data, performed numerical simulations and contributed to the manuscript. M.N. assisted with taking and analysing data, and preparing the manuscript. J.A.S. assisted with taking data. J.J.K.S., F.J.R.F. & X.X. constructed theoretical models, performed simulations and contributed to the manuscript. In addition, X.X. first described the underlying physical process. J.M. assisted in data analysis, contributed to the manuscript and conceived of the experiment.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing interests.
Peer review
Peer review information
Nature Communications thanks Jing Zhang and the other anonymous reviewer(s) for their contribution to the peer review of this work. A peer review file is available.
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Hu, Y., Kingsley-Smith, J.J., Nikkhou, M. et al. Structured transverse orbital angular momentum probed by a levitated optomechanical sensor. Nat Commun 14, 2638 (2023). https://doi.org/10.1038/s41467-023-38261-7
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467-023-38261-7
- Springer Nature Limited
This article is cited by
-
Gradient and curl optical torques
Nature Communications (2024)
-
PT-like phase transition and limit cycle oscillations in non-reciprocally coupled optomechanical oscillators levitated in vacuum
Nature Physics (2024)
-
Displacement Calibration of Optical Tweezers With Gravitational Acceleration
Photonic Sensors (2023)