Abstract
Currently, sustained in vivo delivery of active bone morphogenetic protein-2 (BMP-2) protein to responsive target cells, such as bone marrow-derived mesenchymal stem cells (BMSCs), remains challenging. Ex vivo gene transfer method, while efficient, requires additional operation for cell culture and therefore, is not compatible with point-of-care treatment. In this study, two lentiviral gene constructs – (1) Lv-BMP/GFP, containing human BMP-2 and green fluorescent protein (GFP) gene (BMP group); or (2) Lv-GFP, containing GFP gene (GFP group) – were incorporated with human BMSCs into a solution of photocrosslinkable gelatin, which was then subjected to visible light-based projection stereolithographic printing to form a scaffold with desired architectures. Upon in vitro culture, compared to the GFP group, cells from BMP group showed >1,000-fold higher BMP-2 release, and the majority of them stained intensely for alkaline phosphatase activity. Real-time RT-PCR also showed dramatically increased expression of osteogenesis marker genes only in the BMP group. 3.5 months post-implantation into SCID mice, the micro-computed tomography imaging showed detectable mineralized areas only in the BMP group, which was restricted within the scaffolds. Alizarin red staining and immunohistochemistry of GFP and osteocalcin further indicated that the grafted hBMSCs, not host cells, contributed primarily to the newly formed bone.
Similar content being viewed by others
Introduction
Each year, more than 1 million bone fracture patients are hospitalized in the United States, and 5–10% of them present delayed healing or nonunion, representing a major clinical challenge in orthopaedic surgery1. Nonunion, left untreated, causes pain, limits mobility, and increases healthcare cost2. So far, no effective medications are available to directly stimulate intrinsic bone regeneration; a surgical intervention is often required. For example, autologous bone graft, a procedure that involves harvesting normal bone tissues from healthy area and implanting into defect sites, has been frequently used and is considered as the “gold standard” for nonunion fractures. However, this treatment has several drawbacks, such as donor site morbidity, limited tissue availability, and molding challenges.
Tissue engineering, an emerging biomedical technology that aims to produce replacement tissues in vitro, offers exciting promise to overcome the obstacles of using native tissues. In principle, cell-based bone tissue engineering involves three basic components: osteogenic cells, osteoconductive scaffolds, and osteoinductive growth factors3. These components can be used individually or in combination. Irrespective of the approach, it is generally assumed that a strong osteoinductive cue is critical for successful bone repair. Growth factors known to be important for bone development and healing, such as recombinant bone morphogenetic protein-2, 7 (BMP-2, 7), platelet-derived growth factor (PDGF), and vascular endothelial growth factor (VEGF), have been applied and investigated in the context of bone regeneration, among which BMP-2 is used most widely because of its high efficacy in stimulating osteogenesis4. A systematic review reported that addition of BMP-2 significantly increased the efficacy of conventional intervention for the healing of acute open tibia fractures5, and a 44% reduction in bone nonunion was also observed6.
Technically, there are 2 main avenues for BMP-2 application: direct administration of BMP-2 protein and indirect administration by introduction of BMP-2 gene into target cells. Due to the short half-life of BMP-2 protein, its metabolic clearance in vivo, and the need of continuous osteogenic stimulation for efficacious bone regeneration, the former method requires repeat administration or a large initial dose of BMP-27. For example, without a second intervention, up to 12 mg of BMP-2 is needed to heal tibial fractures6, which has resulted in unpredictable, severe side effects in some cases, including high rates of nerve root irritation and ectopic bone formation8. Such potential risks necessitate the controlled release of BMP-2 or other delivery strategy, such as direct gene transfer of BMP-2 gene. Gene delivery can be accomplished virally through adeno-associated virus (AAV) and lentivirus, or non-virally in the form of plasmid DNA with different transfection methods9. In comparison to direct administration of proteins, BMP-2 gene transduction into cells presents obvious advantages. For example, BMP-2 protein is produced endogenously by the resident transduced cells; thus, repeat injection or large dose usage of expensive BMP-2 protein is not needed. In addition, the time duration of BMP-2 presence may be controlled by adjusting the expression level of BMP-2 gene and the type of delivery vectors.
Currently, ex vivo gene transfer to produce genetically modified stem cells requires the additional process of in vitro culture to achieve gene expression in cells, which is costly and requires cell manipulation. In particular, the additional cell culture step is incompatible with point-of-care treatment. Therefore, scaffold-mediated gene delivery and localized transduction at fracture sites has been proposed as an alternate approach that does not involve in vitro cell culture prior to any surgical implantation. Since void- or gap-filling biomaterial scaffolds are normally required for the treatment of large bone defects or nonunion, such scaffolds may be easily adopted as a carrier system for gene vectors. In 1996, Fang et al.10 reported the use of collagen sponge impregnated with plasmid DNA carrying BMP-4 gene for the repair of rat bone nonunion, and showed that some of repair cells were transduced by BMP-4 gene, inducing enhanced bone growth. This landmark work, as well as subsequent work from other groups, have prompted a new “gene-activated matrix/scaffolds” strategy for augmented bone repair11,12,13,14,15. However, most of the reported studies have used naked plasmid cDNA with various carriers, which present some advantages such as low immunogenicity and cost-effectiveness, but cellular uptake of these naked DNA is generally of poor efficiency16. In particular, plasmid DNAs have low capacity in transducing primary cells such as human mesenchymal stem cells (hMSCs), the most promising cell type for bone regeneration. Highest plasmid DNA transfection efficiency into human bone marrow MSCs (hBMSCs) was reported to be ≤45% by using poly-ethyleneimine as the gene delivery vehicle; however, the process also resulted in more than 20% cell death after 72 hours17.
Recently, viral vectors have been used as gene carrier to enhance bone regeneration. For example, self-complementary adeno-associated viral (AAV) constructs encoding BMP-2 were coated on a porous polymer Poly(ε-caprolactone) scaffold and implanted into critically sized immunocompromised rat femoral defects, which were able to transduce hMSCs, leading to significant increases in defect mineral formation as well as mechanical properties18. However, the transduction efficiency is relatively low (<10%). In addition, the AAV viral genome was diluted during cell dividing because recombinant AAV genomes were present as extrachromosomal forms19. In comparison, lentiviral vector is able to efficiently infect both dividing and non-dividing cells, and has been widely used to achieve stable gene transduction20. Although lentiviruses have a risk to integrate into the host cell genome, integration sites may be more restricted in comparison with other viral vectors, thus reducing the risk of insertional mutagenesis21. A recent study reported that lentivirus is able to produce up to 90% transduction efficiency in hBMSCs, with a long-term gene expression22. Lenti-vector-based genetic engineering of stem cell has been used in clinical trials without evidence of vector-induced genotoxicity or other adverse effects23, 24. Therefore, we proposed to develop a single-step procedure to co-introduce lentiviral vector containing BMP-2 gene, together with hBMSCs, into scaffolds without an in vitro pre-transduction process. We hypothesized that the simultaneous packaging of regenerative BMP-2 gene and hBMSCs would result in localized gene transduction in situ, BMP-2 production, robust osteogenesis, and thus, efficient bone regeneration.
We have recently developed a novel, visible light-based projection stereolithographic technology (VL-PSL)25, for the fabrication of customized scaffolds using natural or synthesized biopolymers with precisely controlled architecture, thus overcoming the challenges of using more conventional methods. In addition, this new VL-PSL procedure allows simultaneous live cell encapsulation, resulting in uniform cellularization throughout the structure of the scaffolds. Therefore, in this study, we applied VL-PSL to produce gene-activated scaffolds by incorporating a lentiviral construct that encodes the human BMP-2 gene and green fluorescent protein (GFP) reporter gene (Lv-BMP/GFP) and osteoprogenitor cells into a photocrosslinkable gelatin (mGL) solution, which then underwent VL-PSL to form a three-dimensional (3D) hydrogel construct (Fig. 1). hBMSCs were used as the osteoprogenitor cells owing to their relatively easy accessibility and high osteogenic capacity upon stimulation by osteoinductive factors such as BMP-226. To our knowledge, this is the first report of the application of 3D printing technology in fabricating gene- and cell-activated bone scaffolds. We first assessed whether VL-PSL is compatible with in situ gene delivery in terms of the viability of viral vectors and target cells. We then tested our hypothesis by examining in situ transduction efficiency within construct, endogenous BMP-2 production, and bone formation in vitro and in vivo. Our overall goal was to develop a gene- and cell-activated biomaterial scaffold with precisely controlled architecture and the capability to enhance bone formation for the treatment of bone defects, including nonunion.
Results
Efficiency of ex vivo transduction of Lenti-GFP and Lenti-BMP-2 into hBMSCs
In this study, two lentiviral gene constructs were used. The lenti-CMV-BMP-2/GFP (Lv-BMP/GFP) construct contained human cytomegalovirus (CMV) immediate early promoter driven a full length of human BMP-2 gene (1.2 kB) followed by an internal ribosome entry site (IRES) and a GFP reporter gene to allow monitoring of gene transfer efficiency. A lenti-CMV-GFP (Lv-GFP) construct carrying only the GFP reporter gene served as the control (see Supplementary Fig. S1A). Using a conventional ex vivo transduction procedure on 2D cultures of hBMSCs, green fluorescence was observed as early as 48 hours in either Lv-GFP or Lv-BMP/GFP transduced cells (see Supplementary Fig. S1B). Equal efficiency (~85%) was observed in the two groups. To analyze the osteoinductive effect of the expression of BMP-2 gene, the activity of alkaline phosphatase (ALP) in hBMSCs, an early marker of osteogenesis, was assessed 7 days post-transduction. High enzymatic activity of ALP, as seen by strong histochemical staining (purple), was observed only in the Lv-BMP/GFP group (see Supplementary Fig. S1C), indicating the functional bioactivity of the BMP-2 produced after gene transduction.
In vitro characterization of constructs produced by single-step fabrication
hBMSCs were introduced with either Lv-BMP/GFP (BMP group) or Lv-GFP (GFP group) to the mGL solution, and were encapsulated into the hydrogel scaffolds in a single step, using a VL-PSL 3D printing technology previously developed (Fig. 1)23. As shown in Fig. 2A,B and C, VL-PSL was able to produce hydrogel constructs with different architectures and porous infrastructures. More importantly, GFP expression was observed in both groups and the transduction efficiency in both groups was similar at ~65–80 percent (Figs 2D,F, S4). We also observed that cell distribution was uniform within the construct and conformed to the scaffold geometry as well. For example, no cells were seen in the pores, (Fig. 2E,G), as designed.
BMP-2 secretion from constructs in BMP group
The expression of the transduced BMP-2 in the 3D constructs was analyzed next. Cell laden scaffolds were cultured in basal growth medium for 4 days, and then the BMP-2 concentration in the medium was measured by enzyme-linked immunosorbent assay (ELISA). In the BMP group, BMP-2 concentrations were at 5–15 ng/ml (Fig. 3), which was within the range of BMP-2 concentrations (~10 ng/ml) often used to induce BMSCs osteogenesis in vitro 27, 28. In contrast, in the GFP control group, the level of BMP-2 protein was at the undetectable range, which was expected since BMP-2 was not supplemented into the culture medium.
Robust osteogenesis in BMP group constructs
After 14 days in culture, the constructs were histochemically stained in toto for ALP activity, detectable as purple staining (Fig. 4A). In the BMP group, most cells appeared densely stained throughout the scaffolds, while cells in the GFP control group showed poor staining, clearly indicating the substantially higher activity of ALP in cells of the BMP constructs. After 4 weeks in culture, real time RT-PCR was employed to analyze the expression of osteogenic marker genes in both groups. The expression of Runt-related transcription factor 2 (RUNX2), Collagen type I (COL 1), Osteocalcin (OCN) and Bone sialoprotein (BSPII) genes were significantly higher in the BMP group, compared to those in GFP control group (Fig. 4B). Osteocalcin immunohistochemistry further confirmed its deposition within the BMP constructs (Fig. 4C). We also examined whether the higher level of extracellular matrix production in the BMP group constructs would contribute to higher mechanical properties. We measured the compressive moduli of scaffolds in both groups at culture day 35, and found that the BMP group constructs became stiffer with time with ~90% higher compressive modulus than those in the GFP control group (see Supplementary Fig. S2). Taken together, these results indicate that hBMSCs encapsulated within the BMP group constructs underwent robust osteogenesis, which was not seen in the GFP group.
Assessment of in vivo ectopic bone formation capacity of VL-PSL fabricated, hBMSC-seeded constructs
After fabrication, the constructs from the BMP and GFP groups were immediately and individually implanted into the hindlimb musculature of SCID mice. At 3.5 months post-implantation, micro-computed tomography (µ-CT) imaging showed detectable mineralized areas in the BMP group, suggesting ectopic bone formation in muscle (Fig. 5A), which were absent in the GFP control implants. The implants were harvested and then processed for biochemical, mechanical, and histological analyses. For histology, the samples were processed without de-calcification. In agreement with the μ-CT imaging results, the total calcium content of the BMP group was 3.6 μg/construct, substantially higher than that of the GFP group (0.08 μg/construct; Fig. 5B, p < 0.01). Constructs in the BMP group also exhibited stronger mechanical property with a compressive modulus of 350 kPa (Fig. 5C, p < 0.01), which is significantly higher than the constructs right before implantation (35kPa). Such enhancement could have resulted from the higher content of calcium and extracellular matrix. In comparison, the stiffness of the GFP group implants was low and unchanged with time.
As shown in Fig. 6, there was no apparent sign of host tissue reaction, indicated by minimal ingrowth of host tissue and blood vessels, which was further confirmed by H&E staining (see Supplementary Fig. S3). Alizarin red staining was employed to assess the spatial distribution of tissue mineralization, and the results showed that robust positive staining (red) was only seen in the BMP group (Fig. 6A,B), in agreement with the results from μ-CT imaging. It is noteworthy that calcium deposition was localized only to the center of the construct rather than its margin, suggesting localized bone formation within the implant without outgrowth or contribution from host cells.
To assess whether the mineralization observed was a result of genuine osteogenic differentiation and ossification, immunohistochemistry was performed to detect osteocalcin, a bone cell specific marker. Positive osteocalcin staining was clearly seen only in the BMP group (Fig. 6D,E), but not in the GFP group (Fig. 6C), indicating osteogenesis and the presence of osteoblasts within the BMP-2 gene-loaded constructs.
The fact that osteogenesis was only observed within the center area of the implanted constructs (Fig. 6B,D,E) suggested that the transplanted hBMSCs were likely to be the key contributing cell population in this process. This was examined by exploiting the presence of the GFP reporter gene in the lentiviral BMP-2 gene construct (see Supplementary Fig. S1), resulting in expression of both GFP and BMP-2, and allowing the tracing of the transduced cells using GFP as a marker. We then performed GFP immunohistochemistry to trace the distribution of the transduced hBMSCs. As shown in Fig. 6F, the peripheral area of the constructs showed very weak GFP staining, while the most GFP-positive cells were observed in the center of the constructs, indicating either a higher level of gene transduction or abundance of transduced cells, or both, in the center. This distribution of GFP staining roughly coincided with that of osteocalcin immunostaining and alizarin red positive areas, strongly suggesting that the implanted hBMSCs, not host cells, were the major contributing cell population to osteogenesis and bone formation in the implanted constructs in vivo.
Discussion
Our study reported here has critically extended the potential of gene-activated matrix as a bone repair methodology by developing a gene- and cell-activated customized scaffold, produced by combining a rapid 3D printing technology with viral vector-based gene delivery and stem cell based tissue engineering through a single-step procedure.
Gene-activated matrices have been studied extensively since the first report about two decades ago10. In most subsequent studies, the purpose of gene delivery was to release gene harboring vectors from the matrix to transduce host cells. The advantages and disadvantages of this strategy, for example, for bone formation, are obvious. The method is simple and does not require cell transplantation, and in vitro cell harvest and additional culture process are not necessary. However, since host cells need to migrate into the scaffold from the surrounding tissues to allow gene transduction, the introduced gene constructs are likely to diffuse out of the scaffold during this time, resulting in out-of-scaffold gene delivery and transgene (e.g., BMP-2) expression, and finally, the unregulated bone formation29. In addition, the gene transduction and osteogenesis that starts from the edge or margin of the implants may result in reduced or delayed bone formation in the center area, a complication often observed in bone nonunion. Therefore, for effective application of gene-activated matrices for bone formation, it is important to control the amount and location of the expressed BMP-2 and the newly formed bone. Controlled release of gene constructs has been applied, but did not solve the problem completely30. To address these requirements, we have designed a method for in situ scaffold-mediated stem cell engineering by transplanting progenitor cells simultaneously with desired viral gene vectors, thus allowing in situ uptake of virus and gene transfer to control transduction within the scaffold structure, limiting vector release and undesirable bone formation outside of the implanted graft.
The engineered biomaterial scaffold architecture is known to play an important role in modulating bone regeneration and determining the final anatomical aspects of the repaired bone31. For example, a 0°/90° alignment of the scaffold fibers demonstrated a significantly improved bone regeneration32, 33. Thus, a scaffold fabrication method with customizable capacity is desirable. Currently, there are several different solid freeform fabrication technologies (3D printing) that allow for precise scaffold production based on computer-aided design (CAD) models or clinical imaging. However, not all of them support live cell incorporation. In addition, due to the known sensitivity of DNA to ultraviolet (UV) illumination, i.e., DNA damage resulting from UV-initiated pyrimidine dimerization, fabrication methods using UV as the polymerization trigger are, in principle, incompatible with DNA-based matrix activation. The VL-PSL method employed here utilizes visible light23, thus removing the risk of compromising cell viability25, 34, 35, or damaging the activity of the viral vectors; this is confirmed by our results showing the viability and infectivity of viral vectors after the VL-PSL process.
To further control a burst release of viral vectors from the biomaterial, a hydrogel scaffold with nano-pores is desired to reduce free diffusion, compared to other scaffolds with larger pores30, 36. For this purpose, we have chosen gelatin hydrogel, fabricated by VL-PSL, as the biomaterial because of its biocompatibility and osteoconductive capacity37,38,39. It is also biodegradable, therefore allowing tissue remodeling for new bone formation. A limitation of gelatin is its low mechanical strength (~30 kPa compressive modulus), although robust osteogenesis may compensate in part for this insufficiency, since enhancement of the mechanical strength of the gelatin constructs was observed in the BMP group in our in vivo study (Fig. 5D). Recently, we have incorporated poly-D,L-lactic acid/polyethylene glycol/poly-D,L-lactic acid (PDLLA-PEG) in VL-PSL for live cell fabrication, and produced constructs exhibiting much stronger mechanical property (>800 kPa compressive modulus)35. However, whether such gel scaffolds support osteogenesis is unknown and will be tested in our future work.
Although lentiviral vectors are not completely devoid of the risk of oncogenicity, no apparent adverse effects with the use of lentiviral vectors have been reported in clinical trials23, 24, 40, 41. In addition, lentiviral vectors are highly efficient in transducing primary hBMSCs in comparison to AAV18, 42. In our study, the average level of BMP-2 production was 10 ng/ml from 1 × 106 cells in 5 days, which is sufficient to induce hBMSC osteogenesis. In comparison, a study using AAV as the carrier reported a highest BMP-2 concentration at 2 ng/ml18. We are unable to identify directly comparable studies, but one group using goat BMSCs and non-viral BMP-2 vectors reported 8 ng/ml BMP-2 production from 1 × 106 cells in 14 days43, illustrating the high transfection efficiency of our method. Using our method, after 3 months of culture, BMP-2 production by hBMSCs is still detectable, although the level has decreased to 1.3 ng/ml/1 × 106 cells.
In previous reports using scaffolds loaded with BMP-2 protein or BMP-2 expressing cells, the majority of bone formation is often occurs at the margin areas; in these instances, the location of the excessive bone formation may function as a physical barrier to delay or impair the ossification process in the interior regions of the grafts44, 45. In the current in vitro study, uniform bone formation (indicated by ALP staining) throughout the construct was observed, representing a more desirable process of bone formation. However, it is interesting to note that our in vivo results show higher level of osteogenesis and GFP immunostaining localized at the center instead of at the margin of the implanted construct, which could have resulted from the difference between in vitro and in vivo culture conditions. In the in vitro study, the released virus stayed in the medium, resulting in saturated viral concentration in the margin, sufficient to infect the remaining cells. On the other hand, under in vivo conditions, the released virus may be quickly cleared by the body, leading to continuous release of AAV from the implant and less bone formation at the margin. Also, since no observable bone formation is seen outside of the scaffold implants, it is reasonable to assume that the amount of released lentiviral particles is insufficient to transduce the host cells surrounding the implant. Our recent in vitro results obtained a Transwell co-culture set-up show only limited gene transduction of cells after being exposed to the conditioned medium of GFP or BMP-loaded scaffolds (data not shown); effective gene transduction of hBMSCs only takes place in-scaffold, likely because of the dependence on a sufficient level viral gene construct. In addition, we observe similar spatial distribution of Alizarin red and GFP positive area, indicating that the formation of new bone involves primarily transplanted cells. Taken together, we conclude that the bulk of the viral load is locally transduced into the seeded hBMSCs within the scaffold, without burst release from the scaffolds, which reduces the risk of uncontrolled bone formation. Therefore, the gene and cell-activated construct developed here is a promising and likely safe method to achieve localized and homogeneous bone formation.
It should be pointed out that the in vivo bone formation observed here is relatively slow with little vascularization (Figs 6 and S3), which could impair long-term integration between the neo-bone graft and host tissue. In our previous study, we have shown that angiogenesis resulting from viral-vector-based vascular endothelial growth factor (VEGF) transduction is important for enhancement of the regenerative potential of stem cells46. A possible reason is that the gene-activated scaffold is applied without the continuous presence of agents, such as Polybrene47, that are commonly used to enhance virus absorption and gene transfer efficiency, which may present potential safety risks for clinical application48, 49. As a result, we did not achieve a level of BMP-2 production similar to that in vitro; future optimization of viral load and judicious formulation of virus adsorption enhancing cocktails may accelerate this process. The paucity of blood vessels in the constructs, which would limit host cell invasion, may be addressed in the future by co-introducing viral gene constructs of other osteoinductive factors, such as VEGF, together with BMP-250.
Conclusions
We have developed a single-step, BMP-2 gene-activated, live cell encapsulated scaffold fabrication procedure for bone formation. Efficient transgene expression (GFP and BMP-2) is seen in hBMSCs encapsulated in the engineered scaffolds. Cell distribution is uniform within the construct and conforms to scaffold geometry. Results from ELISA, real time RT-PCR, immunohistochemistry, and mechanical testing all indicate robust osteogenesis within constructs activated with lentiviral BMP-2 vector, without the supplementation of exogenous BMP-2 protein. After intramuscular implantation in SCID mice, μ-CT imaging showed detectable mineralized areas in the BMP group, suggesting effective ectopic bone formation in vivo, which is absent in the GFP control group. In addition, formation of the new bone is localized and restricted within the implanted scaffolds and is primarily associated with the transplanted GFP-labeled hBMSCs, based on coincident staining of osteocalcin and GFP.
Materials and Methods
Materials
All reagents used in this study were purchased from Sigma-Aldrich (San Luis, MO), unless otherwise stated.
Isolation and expansion of hBMSCs
hBMSCs were isolated from bone marrow aspirates obtained during total joint arthroplasty using a previous protocol established in our laboratory51 with IRB approval and informed patient consent (University of Washington and University of Pittsburgh). The stemness of hBMSCs was tested by colony forming efficiency and mesoderm differentiation capability (osteogenesis, chondrogenesis, and adipogenesis, data not shown). Passage 3 (P3) hBMSCs were used in this study by pooling cells from 3 patients (55-year-old male, 67-year-old female, and 81-year-old male).
Lentiviral vector preparation
The lenti-CMV-BMP-2/GFP (Lv-BMP/GFP) construct contains human cytomegalovirus (CMV) immediate early promoter driven full length human BMP-2 gene (1.2 kB) followed by an internal ribosome entry site (IRES) and a GFP reporter gene to allow monitoring of gene transfer efficiency by green fluorescence. A lenti-CMV-GFP (Lv-GFP) construct carrying only the GFP reporter gene served as control (see Supplementary Fig. S1A). Lenti-viral vectors were produced according to the standard protocol52.
Functional testing of lentiviral BMP-2 construct by ex vivo transduction into hBMSCs
P3 hBMSCs were expanded to 80% confluency and the medium was switched to serum free DMEM medium containing lentiviral vectors (total 2 × 106). Sixteen hours after infection, the culture medium was replaced with fresh growth medium (GM, DMEM supplemented with 10% fetal bovine serum, FBS). GFP expression was observed and imaged using an epifluorescence microscope (CKX41, Olympus, Japan) equipped with a color camera (DFC321, Leica, Germany) at 48 hours post-infection. Expression of alkaline phosphatase (ALP) in hBMSCs was qualitatively analyzed at 14 days after infection by ALP histochemical staining using a Leukocyte Alkaline Phosphatase Kit (86 R, Sigma) following the manufacturer’s protocol. Briefly, the culture medium was removed and staining solution was added and incubated with cells at 37 °C for 1 hour. Stained cultures were observed and imaged using a DSL camera (T3i, Canon, Japan).
Preparation of materials for visible light-based stereolithography (VL-PSL)
Methacrylated gelatin (mGL), serving as the monomer for VL-PSL, was prepared as described previously39. Briefly, 3% aqueous gelatin solution was reacted with methacrylic anhydride for 16 hours, dialyzed extensively against H2O to remove unreacted reagents, lyophilized, and kept in dark until use. The visible light activated photoinitiator, lithium phenyl-2,4,6-trimethylbenzoylphosphinate (LAP), was synthesized by reacting dimethyl phenylphosphonite (Acros Organics, New Jersey) with 2,4,6-trimethylbenzoyl chloride via a Michaelis-Arbuzov reaction53.
Single step VL-PSL
A customized stereolithographic apparatus (EnvisionTec, Germany) was used for VL-PSL using parameters optimized in our previous study25. 10% mGL (w/v) and 0.6% LAP (w/v) were dissolved in 30 ml HBSS (Ca & Mg+) completely and adjusted to pH 7.4 with sodium hydroxide. Insulin-Transferrin-Selenium (ITS - 10 mg/L insulin, 5.5 mg/L transferrin, and 6.7 μg/ml sodium selenite; Invitrogen) and Polybrene (8 µg/mL) were added to maintain cell viability and virus infection ability, respectively, under serum free condition. hBMSCs (5 × 106 cells/ml final cell density) were then mixed into the gelatin solution together with lenti-GFP or lenti-BMP-2/GFP viral constructs (1 × 108 for each).
The cell suspension was poured onto the plate and VL-PSL started using a procedure that we have previously established25. Solid hexagonal, cylindrical, and cubic models or a porous cylindrical model (with 500 μm diameter tubes passing top-to-bottom through the structure and 2 mm distance between the closest edges of any two tubes) were used as the templates for fabrication. To maintain consistency in quantitative assays, a solid cylindrical 3D model (5 mm diameter and 2 mm height) was used to make constructs for all subsequent experiments. After VL-PSL, the solidified scaffolds were taken off the platform and transferred to growth medium (10% FBS), supplemented with Polybrene, but without antibiotics for 4 hours. Afterwards, the medium was removed and replaced with fresh, full growth medium. The medium was changed every 3 days, up to 35 days. The constructs containing lenti-GFP or lenti-BMP-2/ GFP vectors were named as the GFP group or BMP group, respectively.
Gene transfer efficiency within the 3D construct was assessed after 2 days on the basis of GFP fluorescence. Microscopic fields obtained by fluorescence (GFP) and phase contrast imaging were merged to determine infection efficiency (see Supplementary Fig. S4). Specifically, the number of fluorescent, GFP-positive cells detected by fluorescence microscopy was expressed as a percentage of the total number of cells detected by phase contrast microscopy.
BMP-2 quantitation
Cylindrical constructs (5 mm diameter and 2 mm height) were individually cultured in 200 µl GM. On day 4, the medium was replaced with fresh GM and constructs were cultured for 4 additional days. BMP-2 accumulation in the culture medium during this period, produced by the transduced hBMSCs, was quantified using a BMP-2 Quantikine ELISA Kit (R&D, Minneapolis, MN).
Alkaline phosphatase (ALP) staining
At day 14 post-fabrication, ALP expression in hBMSCs encapsulated within the gelatin constructs were histochemically assessed as described above. Briefly, the cultured constructs were removed from culture medium and immersed into the staining solution and incubated at 37 °C for 1 hour. The macroscopic and microscopic appearance of stained constructs was imaged using a DSL camera (T3i, Canon, Japan) or a microscope (CKX41, Olympus, Japan) equipped with a color camera (DFC321, Leica, Germany).
Real-time quantitative reverse transcription polymerase chain reaction (real time RT-PCR)
Expression of osteogenic genes in hBMSCs was analyzed with real time RT-PCR after 28 days in vitro culture. Constructs from GFP or BMP groups were washed 3 times with HBSS, placed into Trizol (Invitrogen), and ground with a plastic pestle. Total RNA was extracted into the aqueous layer after adding chloroform and purified using an RNeasy Plus Mini Kit (Qiagen, Maryland). Real time RT-PCR was performed using the SYBR Green-based method and a real-time PCR system (StepOne Plus, Applied Biosystems). Expression levels of osteogenesis-related genes such as Runt-related transcription factor 2 (RUNX2), collagen type I (COL1), osteocalcin (OCN), and bone sialoprotein II (BSP2) were analyzed by the 2−ΔΔct method with 18 S rRNA as the control housekeeping gene.
Histological analysis
Samples were fixed in 10% buffered formaldehyde (Fisher Chemicals, Fari Lawn, NJ), dehydrated in a series of ethanol baths (70, 95 and 100%) and finally in xylene, and embedded in paraffin. Tissue blocks were sectioned at 6 μm thickness using a standard microtome (Leica Biosystems, France), which were then subjected to standard H&E staining and imaged with a CKX41 microscope (Olympus, Japan) equipped with a Leica DFC 3200 camera.
Osteocalcin immunohistochemistry
The extent of osteogenesis was further assessed based on immunohistochemical staining of osteocalcin. Briefly, histological sections were subjected to antigen retrieval by treatment with chondroitinase ABC (100 mU/ml) and hyaluronidase (250 U/ml), peroxidase blocking in 3% H2O2, and further blocked in 1% horse serum. Primary antibody (rabbit anti-osteocalcin; abcam ab93876, 1:200) was applied to the section, followed by overnight incubation at 4 °C. Detection of primary antibody was performed with biotinylated goat anti-rabbit antibodies (Vector Laboratories, Burlingame, CA). Secondary peroxidase-conjugated antibodies were visualized using a Vectorstain Elite ABC and developed with the VIP kit (Vector Laboratories). Sections were counterstained with hematoxylin prior to mounting. Images were captured with a CKX41 microscope (Olympus, Japan) equipped with a Leica DFC 3200 camera.
Mechanical testing
At culture day 35, the compressive moduli of constructs in the GFP and BMP groups were assessed using a mechanical tester (ElectroForce 3200, Bose). Constructs were placed between two metal plates and compressed to 20% of original thickness (0.4 mm) with the force recorded. Compressive Young’s modulus was determined from the linear area in the stress/strain curve.
Intramuscular implantation of constructs
Female Severe Combined Immunodeficiency (CB17/Icr-Prkdcscid/IcrIcoCrl SCID®) mice (8–12 weeks old; Charles River Laboratories; Wilmington, MA) were used according to University of Pittsburgh Institutional Animal Care and Use Committee (IACUC) approved protocols. All experiments were performed in accordance with relevant guidelines and regulations. Prior to surgery, the hind legs of the animals were shaved on both sides and cleansed with alcohol. A skin incision (around 6 mm long) was made to reveal the muscles of the upper long bone. Blunt dissection of the muscles was carefully performed to create pockets for the constructs without making traumatic damage to the muscle tissues. Constructs from the GFP or BMP group (n = 6 for each group) were then inserted into the muscle on both sides of the hind legs. Polybrene was not included for the in vivo study due to potential safety issue in the future clinical application48, 49. The muscles and skin of the animals were then individually and sequentially sutured.
Micro–computed tomography (µCT)
At 3.5 months after implantation, the mice were anesthetized and scanned at 14 μm resolution with a commercial μ-CT system (Scanco vivaCT 40, Switzerland). Three-dimensional reconstructions of detectable mineralized tissue in implantation site were created at 29 μm resolution for analytical visualization. A volume of interest was defined for each specimen, and a threshold was chosen to exclude any non-mineralized tissue. The total volume and density of bone was then determined.
Measurement of total calcium content
The animals were sacrificed at 3.5 months post-implantation and the implants were harvested. After clearing of adventitious muscle tissues, the constructs were soaked in 1 ml 1 N HCl and ground thoroughly. After extraction for 3 days at room temperature, the solution was cleared by centrifugation at 12,000 g for 5 minutes and the calcium concentration was measured using a calcium colorimetric assay kit (BioVision, San Francisco, CA), and total calcium deposition in each construct was calculated.
Alizarin red staining
Calcium deposition in the implants was further examined histologically by Alizarin Red S staining (Rowley Biochemical, Danvers, MA) and then imaged with a CKX41 microscope (Olympus, Japan) equipped with a Leica DFC 3200 camera.
GFP Immunohistochemistry
To analyze the distribution of implanted hBMSCs, on the basis of their transduction by lentiviral vectors containing GFP, immunohistochemistry was performed using rabbit antibodies directed against GFP (Abcam, ab6556; 1:500) using the procedure described above for osteocalcin.
Statistics
All experiments were performed in triplicates. All results are presented as means ± standard deviation and analyzed using paired t-test with statistical significance set at p-value < 0.05. In all cases, * was used for p < 0.05, and ** for p < 0.01.
Data availability
The datasets generated from the current study are available from the corresponding author upon reasonable request.
References
Einhorn, T. A. Enhancement of fracture-healing. The Journal of bone and joint surgery. American volume 77, 940–956 (1995).
Giannotti, S. et al. Current medical treatment strategies concerning fracture healing. Clinical cases in mineral and bone metabolism: the official journal of the Italian Society of Osteoporosis, Mineral Metabolism, and Skeletal Diseases 10, 116–120 (2013).
Drosse, I. et al. Tissue engineering for bone defect healing: an update on a multi-component approach. Injury 39(Suppl 2), S9–20 (2008).
Gothard, D. et al. Tissue engineered bone using select growth factors: A comprehensive review of animal studies and clinical translation studies in man. Eur Cell Mater 28(discussion 207-168), 166–207 (2014).
Garrison, K. R. et al. Clinical effectiveness and cost-effectiveness of bone morphogenetic proteins in the non-healing of fractures and spinal fusion: a systematic review. Health technology assessment 11(iii-iv), 1–150 (2007).
Govender, S. et al. Recombinant human bone morphogenetic protein-2 for treatment of open tibial fractures: a prospective, controlled, randomized study of four hundred and fifty patients. The Journal of bone and joint surgery. American volume 84-A, 2123–2134 (2002).
Valentin-Opran, A., Wozney, J., Csimma, C., Lilly, L. & Riedel, G. E. Clinical evaluation of recombinant human bone morphogenetic protein-2. Clinical orthopaedics and related research, 110–120 (2002).
Hustedt, J. W. & Blizzard, D. J. The controversy surrounding bone morphogenetic proteins in the spine: a review of current research. Yale J Biol Med 87, 549–561 (2014).
Wegman, F., Oner, F. C., Dhert, W. J. & Alblas, J. Non-viral gene therapy for bone tissue engineering. Biotechnology & genetic engineering reviews 29, 206–220 (2013).
Fang, J. et al. Stimulation of new bone formation by direct transfer of osteogenic plasmid genes. Proceedings of the National Academy of Sciences of the United States of America 93, 5753–5758 (1996).
Elangovan, S. et al. The enhancement of bone regeneration by gene activated matrix encoding for platelet derived growth factor. Biomaterials 35, 737–747 (2014).
Bonadio, J., Smiley, E., Patil, P. & Goldstein, S. Localized, direct plasmid gene delivery in vivo: prolonged therapy results in reproducible tissue regeneration. Nature medicine 5, 753–759 (1999).
Endo, M. et al. Bone regeneration by modified gene-activated matrix: effectiveness in segmental tibial defects in rats. Tissue engineering 12, 489–497 (2006).
Tierney, E. G. et al. High levels of ephrinB2 over-expression increases the osteogenic differentiation of human mesenchymal stem cells and promotes enhanced cell mediated mineralisation in a polyethyleneimine-ephrinB2 gene-activated matrix. Journal of controlled release: official journal of the Controlled Release Society 165, 173–182 (2013).
Brunger, J. M. et al. Scaffold-mediated lentiviral transduction for functional tissue engineering of cartilage. Proceedings of the National Academy of Sciences of the United States of America 111, E798–806 (2014).
Franceschi, R. T., Wang, D., Krebsbach, P. H. & Rutherford, R. B. Gene therapy for bone formation: in vitro and in vivo osteogenic activity of an adenovirus expressing BMP7. Journal of cellular biochemistry 78, 476–486 (2000).
Tierney, E. G., Duffy, G. P., Hibbitts, A. J., Cryan, S. A. & O’Brien, F. J. The development of non-viral gene-activated matrices for bone regeneration using polyethyleneimine (PEI) and collagen-based scaffolds. Journal of controlled release: official journal of the Controlled Release Society 158, 304–311 (2012).
Dupont, K. M. et al. Synthetic scaffold coating with adeno-associated virus encoding BMP2 to promote endogenous bone repair. Cell Tissue Res 347, 575–588 (2012).
Shakhbazau, A. V. et al. Viral vectors for stable transduction of human mesenchymal stem cells: systems based on adeno-associated viruses and lentiviruses. Bull Exp Biol Med 146, 531–533 (2008).
Zhang, X. Y. et al. Lentiviral vectors for sustained transgene expression in human bone marrow-derived stromal cells. Molecular therapy: the journal of the American Society of Gene Therapy 5, 555–565 (2002).
Vigna, E. & Naldini, L. Lentiviral vectors: excellent tools for experimental gene transfer and promising candidates for gene therapy. The journal of gene medicine 2, 308–316 (2000).
Kallifatidis, G. et al. Improved lentiviral transduction of human mesenchymal stem cells for therapeutic intervention in pancreatic cancer. Cancer gene therapy 15, 231–240 (2008).
McGarrity, G. J. et al. Patient monitoring and follow-up in lentiviral clinical trials. The journal of gene medicine 15, 78–82 (2013).
Biffi, A. et al. Lentiviral hematopoietic stem cell gene therapy benefits metachromatic leukodystrophy. Science 341, 1233158 (2013).
Lin, H. et al. Application of visible light-based projection stereolithography for live cell-scaffold fabrication with designed architecture. Biomaterials 34, 331–339 (2013).
Tuan, R. S., Boland, G. & Tuli, R. Adult mesenchymal stem cells and cell-based tissue engineering. Arthritis research & therapy 5, 32–45 (2003).
Wang, A., Ding, X., Sheng, S. & Yao, Z. Bone morphogenetic protein receptor in the osteogenic differentiation of rat bone marrow stromal cells. Yonsei Med J 51, 740–745 (2010).
Hoshiba, T., Kawazoe, N., Tateishi, T. & Chen, G. Development of stepwise osteogenesis-mimicking matrices for the regulation of mesenchymal stem cell functions. J Biol Chem 284, 31164–31173 (2009).
Chen, N. F. et al. Symptomatic ectopic bone formation after off-label use of recombinant human bone morphogenetic protein-2 in transforaminal lumbar interbody fusion. Journal of neurosurgery. Spine 12, 40–46 (2010).
Kidd, M. E., Shin, S. & Shea, L. D. Fibrin hydrogels for lentiviral gene delivery in vitro and in vivo. Journal of controlled release: official journal of the Controlled Release Society 157, 80–85 (2012).
Thavornyutikarn, B., Chantarapanich, N., Sitthiseripratip, K., Thouas, G. A. & Chen, Q. Bone tissue engineering scaffolding: computer-aided scaffolding techniques. Prog Biomater 3, 61–102 (2014).
Berner, A. et al. Effects of scaffold architecture on cranial bone healing. Int J Oral Maxillofac Surg 43, 506–513 (2014).
Cipitria, A. et al. Porous scaffold architecture guides tissue formation. J Bone Miner Res 27, 1275–1288 (2012).
Lin, H., Cheng, A. W., Alexander, P. G., Beck, A. M. & Tuan, R. S. Cartilage tissue engineering application of injectable gelatin hydrogel with in situ visible-light-activated gelation capability in both air and aqueous solution. Tissue Eng Part A 20, 2402–2411 (2014).
Sun, A. X., Lin, H., Beck, A. M., Kilroy, E. J. & Tuan, R. S. Projection stereolithographic fabrication of human adipose stem cell-incorporated biodegradable scaffolds for cartilage tissue engineering. Front Bioeng Biotechnol 3, 115 (2015).
Seidlits, S. K., Gower, R. M., Shepard, J. A. & Shea, L. D. Hydrogels for lentiviral gene delivery. Expert Opin Drug Deliv 10, 499–509 (2013).
Paul, A. et al. Nanoengineered biomimetic hydrogels for guiding human stem cell osteogenesis in three dimensional microenvironments. J Mater Chem B Mater Biol Med 4, 3544–3554 (2016).
Gibbs, D. M. R., Black, C. R. M., Dawson, J. I. & Oreffo, R. O. C. A review of hydrogel use in fracture healing and bone regeneration. J Tissue Eng Regen M 10, 187–198 (2016).
Lin, H., Cheng, A. W. M., Alexander, P. G., Beck, A. M. & Tuan, R. S. Cartilage tissue engineering application of injectable gelatin hydrogel with in situ visible-light-activated gelation capability in both air and aqueous solution. Tissue Eng Pt A 20, 2402–2411 (2014).
Miao, C. H. Hemophilia A gene therapy via intraosseous delivery of factor VIII-lentiviral vectors. Thrombosis journal 14, 41 (2016).
Mansilla-Soto, J., Riviere, I., Boulad, F. & Sadelain, M. Cell and gene therapy for the beta-thalassemias: advances and prospects. Human gene therapy 27, 295–304 (2016).
McMahon, J. M. et al. Gene transfer into rat mesenchymal stem cells: a comparative study of viral and nonviral vectors. Stem Cells Dev 15, 87–96 (2006).
Loozen, L. D., Wegman, F., Oner, F. C., Dhert, W. J. A. & Alblas, J. Porous bioprinted constructs in BMP-2 non-viral gene therapy for bone tissue engineering. J Mater Chem B 1, 6619–6626 (2013).
Chen, B. et al. Homogeneous osteogenesis and bone regeneration by demineralized bone matrix loading with collagen-targeting bone morphogenetic protein-2. Biomaterials 28, 1027–1035 (2007).
Gao, X. et al. A comparison of bone regeneration with human mesenchymal stem cells and muscle-derived stem cells and the critical role of BMP. Biomaterials 35, 6859–6870 (2014).
Beckman, S. A. et al. Beneficial Effect of Mechanical Stimulation on the Regenerative potential of muscle-derived stem cells is lost by inhibiting vascular endothelial growth factor. Arterioscl Throm Vas 33, 2004–2012 (2013).
Davis, H. E., Morgan, J. R. & Yarmush, M. L. Polybrene increases retrovirus gene transfer efficiency by enhancing receptor-independent virus adsorption on target cell membranes. Biophys Chem 97, 159–172 (2002).
Ransdell, H. T. Jr., Haller, J. A. Jr., Stowens, D. & Barton, P. B. Renal toxicity of polybrene, (hexadimethrine bromide). J Surg Res 5, 195–199 (1965).
Li, M., Husic, N., Lin, Y. & Snider, B. J. Production of lentiviral vectors for transducing cells from the central nervous system. J Vis Exp, e4031 (2012).
Curtin, C. M. et al. Combinatorial gene therapy accelerates bone regeneration: non-viral dual delivery of VEGF and BMP2 in a collagen-nanohydroxyapatite scaffold. Adv Healthc Mater 4, 223–227 (2015).
Lin, H., Yang, G., Tan, J. & Tuan, R. S. Influence of decellularized matrix derived from human mesenchymal stem cells on their proliferation, migration and multi-lineage differentiation potential. Biomaterials 33, 4480–4489 (2012).
Xiang, G. et al. Lentivirus-mediated Wnt11 gene transfer enhances cardiomyogenic differentiation of skeletal muscle-derived stem cells. Molecular therapy: the journal of the American Society of Gene Therapy 19, 790–796 (2011).
Fairbanks, B. D., Schwartz, M. P., Bowman, C. N. & Anseth, K. S. Photoinitiated polymerization of PEG-diacrylate with lithium phenyl-2,4,6-trimethylbenzoylphosphinate: polymerization rate and cytocompatibility. Biomaterials 30, 6702–6707 (2009).
Acknowledgements
The authors gratefully thank Dr. Paul Manner (University of Washington) for providing clinical tissue samples and Dr. Jian Tan (University of Pittsburgh) for isolating hBMSCs. This work was supported in part by the Commonwealth of Pennsylvania Department of Health (SAP4100050913 and SAP4100065563), National Institutes of Health (1UG3TR0021360-1 and 5R01EB019430-02) and the U.S. Department of Defense (W81XWH-10-1-0850, W81XWH-14-1-0217).
Author information
Authors and Affiliations
Contributions
H.L. performed VL-PSL fabrication, BMP-2 ELISA, ALP staining and real time PCR, and wrote the manuscript. Y.T. prepared the vectors and participated animal surgery and care. T.L. conducted immunohistochemistry. N.O. performed µCT. R.K. helped in the design and functional test of vectors. M.F. performed real time PCR and histology. Design and supervision of the study, data interpretation and writing and correction of the manuscript were performed by B.W. and R.T.
Corresponding authors
Ethics declarations
Competing Interests
The authors declare that they have no competing interests.
Additional information
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Electronic supplementary material
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Lin, H., Tang, Y., Lozito, T.P. et al. Projection Stereolithographic Fabrication of BMP-2 Gene-activated Matrix for Bone Tissue Engineering. Sci Rep 7, 11327 (2017). https://doi.org/10.1038/s41598-017-11051-0
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-017-11051-0
- Springer Nature Limited
This article is cited by
-
Caveolin-1 mediates soft scaffold-enhanced adipogenesis of human mesenchymal stem cells
Stem Cell Research & Therapy (2021)
-
Efficient in vivo bone formation by BMP-2 engineered human mesenchymal stem cells encapsulated in a projection stereolithographically fabricated hydrogel scaffold
Stem Cell Research & Therapy (2019)