Abstract
High-resolution 3D geological models are crucial for underground development projects and corresponding numerical simulations with applications in e.g., tunneling, hydrocarbon exploration, geothermal exploitation and mining. Most geological models are based on sparse geological data sampled pointwise or along lines (e.g., boreholes), leading to oversimplified model geometries. In the framework of a hydraulic stimulation experiment in crystalline rock at the Grimsel Test Site, we collected geological data in 15 boreholes using a variety of methods to characterize a decameter-scale rock volume. The experiment aims to identify and understand relevant thermo-hydro-mechanical-seismic coupled rock mass responses during high-pressure fluid injections. Prior to fluid injections, we characterized the rock mass using geological, hydraulic and geophysical prospecting. The combination of methods allowed for compilation of a deterministic 3D geological analog that includes five shear zones, fracture density information and fracture locations. The model may serve as a decameter-scale analog of crystalline basement rocks, which are often targeted for enhanced geothermal systems. In this contribution, we summarize the geological data and the resulting geological interpretation.
Design Type(s) | modeling and simulation objective |
Measurement Type(s) | structure |
Technology Type(s) | observational method |
Factor Type(s) | |
Sample Characteristic(s) | Grimsel Pass • crystal |
Machine-accessible metadata file describing the reported data (ISA-Tab format)
Similar content being viewed by others
Background & Summary
Three-dimensional geological models are of foremost importance for many geo-mechanical investigations (e.g., tunneling, hydropower infrastructure, geothermal energy, groundwater), related numerical simulations (e.g., modeling of hydraulic stimulations), and interpretation of complex 3D monitoring data. Since geological information is often rare and collected pointwise within a larger volume of interest, the mapped structures and properties have to be interpolated or extrapolated throughout this volume. The basic assumption for such interpolation is that properties of the exposed geology are also valid for the hidden geology1.
In most underground geo-engineering tasks, the geology is exposed along one or several kilometer-long boreholes. Additional information can be obtained from the interpretation of geophysical imaging2, or in the context of high-pressure fluid injections, from seismicity clouds3. Both only provide information about large-scale structures. Small-scale information, such as fracture densities and variability of fracture orientations can only be collected from core analysis or geophysical borehole logs, which are time consuming to acquire and require additional economical effort. Nevertheless, the spatial distribution of small-scale fractures and their properties are crucial characteristics of a crystalline rock mass, as these fractures might act as important fluid pathways or could be critically stressed.
Numerical modelling of underground geo-engineering tasks requires - as a fundamental baseline - a detailed geological model that includes geometries and properties of the targeted geological structures. Due to a lack of geological data, most numerical models ignore or strongly simplify the presence of small fractures4, which can lead to uncertainties in modelled predictions (e.g., pressure or contaminant propagation in fractured rock). For high-pressure fluid injections for reservoir development e.g., in the context of enhanced geothermal systems (EGS), thermo-hydro-mechanical-seismic (THMS) coupled processes are especially relevant. Data used in EGS research are mostly obtained from laboratory measurements, reservoir-scale stimulations (e.g., Basel, Switzerland5 and Soultz-sous-forêt, France6) and numerical models7–9. In the literature, there is a lack of observations of detailed geological information at the intermediate scale and of the non-linear scaling relationships between rock mechanical parameters. Reducing this data gap might lead to a better understanding of THMS-coupled processes (e.g., onset of hydraulic shearing and fracturing, aseismic vs. seismic slip displacement, pressure diffusion, etc.) and more accurate corresponding numerical models. More comprehensive geological databases for such geo-engineering research might also allow to set up precise (hydraulic) discrete fracture networks (DFNs), to validate the uncertainties in the geological model, and further develop numerical methods for modeling high-pressure fluid injection at high spatial resolution.
In the framework of the decameter-scale in-situ stimulation and circulation (ISC) experiment, a crystalline rock mass was characterized in great detail including geological, hydraulic10 and geophysical investigations11, as well as in-situ stress measurements12. The ISC experiment was conducted at the Grimsel Test Site (GTS), Switzerland, and aimed to fill the research gap for THMS-coupled processes at the intermediate scale. The two endmember methods for permeability creation through hydraulic stimulation (i.e., hydraulic shearing and hydraulic fracturing) were studied during the experiment, as they are key for EGS development13. The GTS is operated by Nagra and hosted approximately 480 m below surface in the crystalline rocks of the Central Aar Granite and Grimsel Granodiorite. These rocks are assumed to represent a suitable analogue for the deep crystalline basement, which is the target of several deep geothermal boreholes in Switzerland and elsewhere.
In this contribution, we present a unique geological dataset that has been compiled for this experiment and which was essential for the experimental design and the analysis of observations made during the experiment. We were able to reduce the amount of simplifications for our geological model, due to the extensive geological rock mass characterization from tunnels and fifteen boreholes. We present a 3D visualization of our geological interpretation of the test volume, including the geological architecture (i.e., structures and their properties), which can be expanded towards a discrete fracture network, or implemented in hydrogeological, mechanical, hydro-mechanical or THMS-coupled numerical models. Linked to this publication, we make the geological raw data available to the geological community, as well as our visualization tool for the geological rock mass analog. Thus, the published geological dataset and visualization can be used to study various hydro-mechanical or THMS-coupled processes in a decameter-scale crystalline rock mass independent of a fixed geographic location, thereby advancing research of THMS-coupled processes.
Methods
In the framework of the ISC experiment an extensive rock mass characterization program was performed to determine geological structures and their thermal-hydro-mechanical-seismic properties:
-
Geology and rock mass structure: The geology and rock mass structure were characterized based on tunnel wall mapping, core logging, geophysical borehole imaging, i.e. with optical televiewer (OPTV) and acoustic televiewer (ATV) logs, as well as geophysical borehole logging, i.e., seismic velocity, conductivity and resistivity logs.
-
Geophysics: The geophysical prospecting included seismic tomography between the West and East tunnels, and ground-penetrating radar between boreholes and from tunnel-walls.
-
Hydraulics: Multi-scale single- and cross-hole hydraulic tests at various borehole intervals revealed hydraulic properties of the rock mass and identified hydraulically important geological structures.
-
In-situ stress measurements: The in-situ stresses were characterized combining stress-relief and hydraulic methods.
-
Laboratory tests: From uniaxial and triaxial compression tests combined with active seismic measurements, seismic velocities, dynamic elastic parameters and intact rock permeability were estimated. Additionally, static elastic rock mechanical parameters have been measured.
The ensemble of all these investigations allows the construction of a comprehensive hydro-mechanical geological model of the test volume. Here, we only focus on the baseline geological dataset of the test volume, which includes supplementary basic information from hydraulic and geophysical measurements. Table 1 summarizes the results of all characterization methods and provides information whether the data are published in this contribution or elsewhere.
Test site and geological background
The ISC volume can be accessed by three tunnels (Fig. 1) which allow to collect geological information of structures in 3D: The AU-tunnel and the upper AU-gallery in the East and the VE-tunnel in the West. Whereas the AU- and VE-tunnels are TBM tunnels, the upper AU-gallery is a drill-and-blast excavation. A total of 15 boreholes were drilled from AU-cavern (8), AU tunnel (6), and upper AU-gallery (1) into the test volume. The boreholes, with diameters ranging from 86 mm to 146 mm, provide primary point/line information inside the experimental volume. Table 2 summarizes the purposes of the boreholes.
The geology of the Grimsel area has been studied intensely, including detailed investigations of mineralogy, deformation history, and structural geology14–18. Our geological model is embedded into these larger-scale geological observations and is based on additional and more detailed rock mass characterizations to meet the requirements for design and interpretation of the in-situ hydraulic stimulation experiment.
The Grimsel area mainly consists of the Variscan intrusive and Post-Variscan metamorphic lithologies of the Aar Massive. The GTS is located at the boundary between the Central Aare Granite (CAGr) and the Grimsel Granodiorite (GrGr)19. Both lithologies consist of plutonic rocks of the Early Permian age that intruded the crystalline continental crust 299 ± 2 Ma ago20. The rocks of both lithologies show a quartz content between 15–30%21 and are close to the mineralogical transition between granodioritic and granitic, with respect to plagioclase content14,15. The main difference between the two lithologies is the amount of sheet silicate minerals (such as biotite and white mica)17. Zones of weakness from higher sheet silicate contents emerged during the latest phase of differentiation of the plutonic bodies. Along these zones, aplitic dykes and lamprophyres intruded22. Pre-Alpine deformation structures are not identified in either lithology.
During Alpine deformation, the rocks were metamorphosed under upper greenschist facies conditions with peak-temperatures of 450 ± 30 °C and peak-pressure of 6 ± 1 kBar23,24. Note, that newer studies have indicated that peak pressures were probably around 4.4 kBar25. Alpine metamorphism transformed the lamprophyres into meta-basic dykes with enriched biotite content17. Additionally, deformation caused a reorientation of sheet silicates forming a pervasive foliation in both lithologies, with a prevailing strike of N50°E and a dip of 80° towards SE26.
The CAGr and GrGr were also deformed in a purely ductile, brittle-ductile and purely brittle manner during Alpine orogeny. Three different shear zones with respect to orientation and relative age have been distinguished14: 1) The oldest shear zones strike on average N52°E and dip with 77° towards the southeast. These are purely ductile (with very few parallel brittle fractures). 2) The second shear zone set is slightly discordant to the oldest one, striking N67°E with a dip of 75° towards the southeast, and is ductile, too. This orientation also corresponds to the alpine foliation. 3) The youngest shear zones have a strike of N93°E and a dip of 65° towards the south and are brittle-ductile. Previous studies classified those shear zone directions as S1, S2, and S3, respectively14. Note, that S1 and S2 cannot be distinguished in the field14. The brittle faulting happened afterwards (less than 10 Ma ago) and formed cataclasites, breccias, and clay fault gouge18.
Geological characterization
In a first phase of the fieldwork, all three tunnels were mapped with the support of geodetic measurements, focusing on large structures (i.e. shear zones, dykes, persistent fractures). Three coordinate points were measured along fractures, and six coordinate points along shear zones and dykes, with three coordinates on each boundary. Planes fitted through three related coordinates provided a measure of dip-direction and dip of the structures. A total of five major shear zones was mapped along the AU- and VE-tunnels, which can be divided into two groups with respect to orientation and mineralogy/structure. Following previous studies14, the shear zones were classified as S1 (SE-dipping ductile) and S3 (S-dipping brittle-ductile, i.e., ductile shear-zone with late phase brittle deformation) shear zones.
In addition to the geodetic mapping, the architecture of the shear zones was mapped in detail based on panoramic photographs and detailed images of relevant structures (Fig. 2). These visualizations illustrate the difference in structure between the two shear zone types. They also highlight that each shear zone is a 3D feature that varies in thickness throughout the entire volume. The average thickness varies between 173 mm and 1670 mm for S1, and 38 mm and 312 mm for S3. The S1 shear zone direction indicates NW-directed thrusting with localized high strain zones isolating lenses of reduced deformation17. Due to this effect, many authors27–29 have described this type of shear zone as anastomosing. Additionally, it has to be considered, that brittle fractures branch from these ductile shear zones, which are partly filled with quartz. The S3 shear zone direction contains evidence for dextral strike-slip movement14,17. Whenever the orientation of the meta-basic dykes aligns with the S3-direction, these brittle ductile shear zones localize within those dykes. Brittle fractures, as well as milky quartz veins, started forming during this phase of S3-oriented shearing26. Those fractures are often covered with biotite, indicating that the brittle deformation took place under low greenschist facies conditions, where biotite could grow in a chemically stable manner26. Note that we considered thin mechanical discontinuities as fractures, regardless if they showed secondary mineralization or not.
The S1 and S3 shear zones are persistent structures that can be traced over a distance of around 500 m to the surface19. Both shear zones have a core (i.e., zone of highest deformation) and an asymmetric habitus. The core of the S1 shear zones is at their southern boundary (Fig. 2). In the S3 shear zones, fault gouge is not well localized throughout the shear zones, and the most persistent fractures (i.e., which are also hydraulically important) are located at the boundary between shear zone and host rock. The persistence of the structures makes the test volume a suitable analog rock mass for deep geothermal exploitation, since it is assumed that discrete large-scale structures (i.e., shear zones or fractures) are crucial for EGS development6.
The extracted cores from the boreholes were photographed in dry and wet conditions. The core diameters can be found in Table 2. The pictures were transformed into ortho-images and referenced with respect to the in-situ depth along the borehole axis of the extracted core. In a final processing step the pictures were stitched, to produce complete core logs for each borehole. The main focus of these logs is counting fractures and localization of shear zones and dykes. For the fractures, we could clearly distinguish between drilling induced (i.e., normal to borehole axis, no mineral cover, circular scratches on surfaces) and natural fractures. Combining the core logs with optical televiewer (OPTV) and acoustic televiewer (ATV) logs yielded a detailed fracture density dataset for all boreholes. The natural fracture density in the host rock varies between 0 and 3 fractures/meter and increases towards >20 fractures/meter between the S3 shear zones. We refer to this area between the S3 shear zones as the “highly fractured zone”. Additionally, OPTV and ATV logs were used to gather information about true orientations of fractures, shear zones and foliation in the test volume. According to our data, the S3 shear zones consistently dip towards south. OPTV logs revealed a change in orientation of S1 shear zones inside the volume. This re-orientation of the S1 shear zones fits the earlier observations17 that the S1 shear zone experienced dextral dislocation along the S3 shear zone.
Borehole geophysical methods
In addition to the aforementioned borehole imaging logs, several geophysical borehole logs were obtained to characterize the rock mass (see Table 3). The resistivity logs (GuardLog) were used to roughly localize zones of increased fragmentation, as well as to characterize the shear zones. Changes in resistivity along the borehole are interpreted as fluid filled fractures or shear zones. The resistivity values range between 2000 and 3000 Ωm for the S3 shear zones, between 5000 and 6500 Ωm for the S1 shear zones and exceed 10000 Ωm for the intact host rock. The values indicate that fracturing and micro-fracturing is more intense in the S3 shear zones compared to the S1 shear zones. Note, that the resistivity values for the intact host rock were clipped, since they exceeded the maximum detection level of the used probe.
The seismic velocity logs were acquired using a novel borehole tool consisting of one piezo-electric source at the tip and three piezo electric receivers at distances of 0.5, 1.0 and 1.5 m from the source. The tool was moved along the boreholes and measurements were taken every 0.25 m. At each survey location, source and receivers were pneumatically clamped to the borehole wall to ensure coupling so that the probe does not rely on borehole fluid for successful signal transmission. P- and S-wave arrivals could be reliably identified and were manually picked for all data. These P- and S-wave arrival times were used in 1-D travel time inversions that result in P- and S-velocity estimates along each borehole. We found that the travel time inversions give comparable results to a semblance analysis but are more robust in the area of the shear zones, where the waveforms are variable between traces due to the local heterogeneity of the rock.
Flowing fluid electrical conductivity (FFEC) logs were conducted in the framework of hydraulic cross hole testing. These logs were used to trace hydraulically activate fractures by monitoring changes in fluid conductivity due to fresh water inflow into flushed monitoring boreholes. Prior to testing, the electrical conductivity of the monitoring borehole fluid was increased by flushing with salt water.
Rock mechanical parameters
Along with the geological characterization, we investigated the rock mechanical parameters of the rock mass, including a literature review, and static and dynamic laboratory measurements. The elastic parameters were determined for the host rock, as well as for the meta-basic dykes and fractures.
Keusen et al.14, collected statically measured elastic rock properties in the framework of their geological mapping and characterization of the Grimsel Test Site (see Table 4). The measurements were conducted on intact drill cores under uniaxial conditions. The properties of the actual rock mass vary due to their dependence on rock type.
Vogler et al.30–32, measured static elastic parameters of the granitic matrix and fractures in uniaxial configuration. Depending on the tested specimen size they measured tensile strength ranging from 6 MPa (300 mm diameter specimen) to 11 MPa (54 mm diameter specimen) using Brazilian tests. Additionally, they measured static Young’s-Moduli ranging between 10 GPa and 12 GPa for fractured specimens.
In addition to static measurements, dynamic measurements of the rock mechanical properties were conducted in-situ 33 and in the laboratory21 (see Table 5). In combination with an assumed density of 2700 kg/m3 the in-situ dynamic elastic parameters can be calculated from the seismic streamer logs. The laboratory measurements were conducted under 30 MPa confining pressure. Note that the in-situ stress level is lower with σ3 ranging from less than 2.8 MPa (perturbed stress field close to shear zones) to 9.7 MPa (unperturbed ‘far-field’ stress field)34, and the mean stress (σmean) varying between 9.2 MPa and.10.3 MPa.
Geological interpolation and visualization
Based on the compiled geological dataset, we built a Matlab based visualization tool which is published with the dataset via ETH research collection (Data Citation 1). Within this tool, we plot all mapped fractures and shear zones at the boreholes with true dip-direction and dip. Additionally, we plotted the interpolated shear zones in the volume.
To interpolate the five major shear zones throughout the entire test volume we conducted three processing steps. Since each of these steps represents an interpretation of data, we provide the raw data and interim results in the database. Note that our interpolation method was based on fitting planes/surfaces through the midpoints of each shear zone. Thus, our interpolation and the resulting visualization do not include information about the thickness and architecture of the shear zones. This information can be found separately for each tunnel and borehole in the published database.
As a first step for the interpolation, we arranged the mapped shear zone coordinates obtained from tunnels and boreholes into specific sets. Each set represents a specific shear zone (i.e., S1.1, S1.2, S1.3, S3.1 & S3.2). To arrange the data into sets, we considered true dip directions and dip angles.
The second processing step was a linear connection between groups of three coordinates within each set (i.e., triangulation). For this interpolation we mapped linear patches for each group of three coordinates. Since the edges of the patches followed the closest connection line between two coordinates, no true local orientation measurements were considered in this step.
As last processing step, we integrated true local shear zone orientations into the interpolation and created additional coordinates for each shear zone between the boreholes. To do so, we assumed that the shear zone orientations were constant within a radius of 5 m around the tunnels (i.e., measured from the tunnel center) and within a radius of 0.5 m around the boreholes. Following this assumption, we calculated additional shear zone coordinates along discs of the given radii and corresponding orientation around each tunnel/borehole. Then all boreholes and tunnels were connected using a third order polynomial function which additionally was fitted to the discs of constant orientations. We calculated 20 additional coordinates along each third order polynomial function. Subsequently, surfaces were fitted through all corresponding coordinates for each shear zone, including true data points (i.e., mapped coordinates) and interpolated coordinates.
Visualization tool
The visualization tool shows all data in a coordinate system, which has its origin with respect to the Swiss coordinate system origin at
X (Easting) = 667400
Y (Northing) = 158800
Z (Elevation) = 1700.
The tool shows the different steps of data interpretation. It shows the raw data, the linear interpolated shear zones, and the 3rd order polynomial interpolation. Additionally, the fractures are shown in 3D at the boreholes locations and fracture density is visualized. Within the tool, all raw data (e.g., borehole paths and geological data) are linked from .txt-files. Thus, a change in borehole trajectory or change in fracture location along a borehole will be automatically updated in the figure.
Code availability
All data were processed with non-custom-codes. The only custom code that was used in this study was for the 3D visualization of the geological data. This code was built in Mathworks Matlab R2018a and can be download from ETH Zurich Research Collection (Data Citation 1). To run the code, one just needs to open the file “Geological_model_visualization.m”. Within this code several sub-functions that are stored in the functions-folder are implemented. Thus, everything can be modified by the user. If the code is run without any modification it produces, in addition to others, the pictures in Fig. 3a and b.
Data Records
The dataset is published via ETH Zurich Research Collection (Data Citation 1). The dataset is built as a folder structure in which we separated basic input data (i.e., tunnel and borehole coordinates) and geological observations (i.e., core- and borehole logs, fracture densities), from interpreted data (i.e., shear zone interpolations). Table 1 summarizes the data and the file-formats that are provided in the dataset. It also lists additional data and corresponding publications. In addition, we published a separate folder, that contains the Matlab code, functions and required input data to build our 3D visualization.
All data are stored in .txt and .png-files. The only exception are the borehole logs, which are stored in .wcl files. To open these files the commercial software ALT WellCAD, or its freeware version called ALT WellCAD reader can be used. The WellCAD reader can be downloaded from https://www.alt.lu/downloads.htm and an executable of the current version (January 2018) is available within the borehole logs folder in the database. Note that the .wcl-files were uploaded separately into the repository, due to their size.
Within all main folders we stored readme-files, that explain the structure of the data contained in the folder.
Technical Validation
To test the validity of the geological model, it was compared with independent geophysical and hydrogeological observations. Both methods were used to confirm the interpolation of the large-scale features (i.e., shear zones), geological observations such as degree of fragmentation as well as rock physical properties.
Geophysical methods
Seismic tunnel-tunnel measurements were performed between the AU- and VE-tunnels for the purpose of travel time tomography. 123 hammer shots (spacing: 0.5 m) at the western sidewall of AU-tunnel were used as seismic sources and recorded with 120 geophones (spacing: 0.5 m) on the eastern sidewall of VE-tunnel. More than 10000 travel times were used in an anisotropic travel time inversion assuming the axis of symmetry parallel to the foliation of the rock. The velocity along the symmetry axis is shown in Fig. 3c. The strongest feature in the seismic p-wave model is a low velocity zone located in the eastern part of the zone between the S3 shear zones. This is in agreement with borehole observations, which characterize this zone as strongly fragmented (i.e., highest frac/meter ratio). The S3 shear zone is known to have a brittle component and is associated with fractures (see above). Therefore, it can be traced through the test volume using the seismic tomography. The traces are in good alignment with the geological interpolation (Fig. 3c). It is noteworthy that the seismic velocity – and thus possibly the degree of fracturing – appears to be more intense towards the east of the intersection between S1 and the S3 structures. The S1 shear zones do not show a p-wave velocity variation evident in the seismic tomogram possibly because they are purely ductile.
Additionally, ground penetrating radar reflection data were acquired from the AU-tunnel looking westwards using shielded 160 MHz antennas. Figure 3d shows the migrated data following standard processing steps33. The S1 shear zones (i.e., S1.1, S1.2, and S1.3) can be clearly identified and be traced from the AU-tunnel walls into the volume. The most obvious traces correlate with the southern boundaries of the interpolated shear zones. From the geological mapping, it is known that the southern boundaries of the shear zones contain highly strained zones (Fig. 2). Thus, the GPR images supported the interpolation of the geological interpolation of the S1 shear zones, as well as the observation of highly strained southern boundaries. Since the S3 shear zones are perpendicular to the AU-tunnel, and thus to the profile along which the GPR measurements were conducted, they are not visible in the reflection image.
Hydrogeological properties
Hydraulic borehole screening was conducted in both INJ-boreholes, as well as in one PRP, one FBS and one SBH borehole. Systematic pulse injection tests in 2 m packer-intervals were performed in intervals with high fracture density. This screening allowed us to identify permeable fractures and shear zones for further hydraulic characterization with constant-rate injection tests under tomographic conditions. Due to the given packer-interval size (2 m) and the given fracture density (minimum 0−3 fractures per meter), it was not possible to test single fractures. This screening confirmed, that discrete discontinuities are the most important factor for pressure diffusion in the studied rock mass.
The crystalline rock at GTS is saturated and most of the natural permeability occurs in shear zone parallel (S3 orientation rather than S1 orientation) fractures, and especially along meta-basic dyke/host rock contacts. The observed in-situ pressure in the major shear zones in the ISC experimental rock volume is around 0.2–0.3 MPa due to long-term drainage of the near-by tunnels. The average interval transmissivity of the intact rock is in the range of 10−14 – 10−13 m2/s, whereas the transmissivity of shear zones ranges from 10−12–10−6 m2/s 14,35. The highest transmissivities were measured in several packer-intervals that were either along the boundary between shear zone and host rock, or close to the shear zones in the host rock. This might be an effect of the increase in fracture density towards the shear zones, and the high fracture concentration between the two S3 shear zones which is also consistent with the drop in electric resistivity within these zones. Five-packer systems were installed in the two INJ-boreholes to conduct cross-hole pressure tomography. The obtained injectivities vary between 0.003 ml/min/kPa – 0.84 ml/min/kPa with the exception of 48.3 ml/min/kPa at the S3 shear zone in the INJ2 borehole36. The specific storage varies in a range of 10−9–10−6 m−1 37. A detailed analysis of all conducted pulse tests and further hydraulic characterization tests is work in progress and will be published separately.
Prior to detailed cross-hole hydraulic tests, fluid electrical conductivity (FFEC) logging and heat tracer tests were implemented between two injection boreholes. The initial conditions of the monitoring boreholes were perturbed by replacing borehole water with higher electrical conductivity fluid (FFEC logging) or warming up the water in the monitoring borehole (thermal perturbation test). The intrusion of in-situ water through the natural fractures is then measured via electrical conductivity borehole loggers and/or distributed temperature fiber optics. The following information was obtained under two test conditions:
-
Natural condition, where the other borehole is packed off and the location of water intrusion in monitoring borehole reflects the depth of producing fractures.
-
Forced condition, where the water was injected into the other INJ borehole with a constant pressure (<5 bars) and the intrusion of in-situ water in monitoring borehole was monitored. In this case, the depth of the intrusions reflects the location of most conductive fractures between these two boreholes.
Since the used packer interval ranged from 1 to 6 m intervals in various boreholes, it was not trivial to test the connectivity of single structures, so instead the hydraulic properties of shear zones and their adjacent fractures were analyzed and constrained. These data validated that the S3 shear zones with the adjacent parallel fractures - especially the highly fractured zone in between the S3 shear zones - are hydraulically important structures that are persistent throughout the entire volume. The hydraulic data do not validate the overall shear zone interpolations but show that the five interpolated shear zones and the nearby persistent fractures are the most important hydraulic structures within the volume. Nevertheless, the true fluid pathways within the test volume (i.e., along the true fracture network) need to be visualized within a hydraulic discrete fracture network (i.e., HydroDFN), which is recent work in progress and will be published separately.
The comparison between the geological model and independent obtained geophysical and hydrogeological data confirmed that the interpolation of the shear zones is valid. Geological features, such as fracture density, correlate well with geophysical observations. Additionally, it was shown that the geological persistent structures and highly fractured zone around the S3 shear zones are the hydraulically important structures, while the ductile S2 shear zones are much less hydraulically conductive and connected. We argue that the characterized rock mass serves as a valid analog volume for a crystalline basement rock mass.
Additional information
How to cite this article: Krietsch, H. et al. Comprehensive geological dataset describing a crystalline rock mass for hydraulic stimulation experiments. Sci. Data. 5:180269 doi: 10.1038/sdata.2018.269 (2018).
Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
References
References
Bayer, P., Comunian, A., Höyng, D. & Mariethoz, G. High resolution multi-facies realizations of sedimentary reservoir and aquifer analogs. Sci. Data 2, 1–10 (2015).
Schmelzbach, C. et al. Advanced seismic processing/imaging techniques and their potential for geothermal exploration. Interpretation 4, SR1–SR18 (2016).
Deichmann, N., Kraft, T. & Evans, K. F. Identification of faults activated during the stimulation of the Basel geothermal project from cluster analysis and focal mechanisms of the larger magnitude events. Geothermics 52, 84–97 (2014).
Baujard, C. & Bruel, D. Numerical study of the impact of fluid density on the pressure distribution and stimulated volume in the Soultz HDR reservoir. Geothermics 35, 607–621 (2006).
Häring, M. O., Schanz, U., Ladner, F. & Dyer, B. C. Characterisation of the Basel 1 enhanced geothermal system. Geothermics 37, 469–495 (2008).
Evans, K. F., Genter, A. & Sausse, J. Permeability creation and damage due to massive fluid injections into granite at 3.5 km at Soulz: 1. Borehole observations. J. Geophys. Res. 110 (2005).
Bruel, D. Using the migration of the induced seismicity as a constraint for fractured Hot Dry Rock reservoir modelling. Int. J. Rock Mech. Min. Sci 44, 1106–1117 (2007).
Kohl, T. & Mégel, T. Predictive modeling of reservoir response to hydraulic stimulations at the European EGS site Soultz-sous-Forêts. Int. J. Rock Mech. Min. Sci 44, 1118–1131 (2007).
Rutqvist, J. Status of the TOUGH-FLAC simulator and recent applications related to coupled fluid flow and crustal deformations. Comput. Geosci. 37, 739–750 (2011).
Jalali, M. R. et al. A Multi-scale Approach toward understanding the Hydraulic Characteristics of the Stimulated Fractured Crystalline Rock. 44th Congress of the International Association of Hydrogeologists (2017).
Doetsch, J. et al. GPR imaging of shear zones in crystalline rock. 2017 9th International Workshop on Advanced Ground Penetrating Radar (IWAGPR) 1–5. 10.1109/IWAGPR.2017.7996074 (2017).
Krietsch, H. et al. Stress Measurements in Crystalline Rock: Comparison of Overcoring, Hydraulic Fracturing and Induced Seismicity Results. 51st U.S. Rock Mechanics/Geomechanics Symposium (2017).
Amann, F. et al. The seismo-hydro-mechanical behaviour during deep geothermal reservoir stimulations: open questions tackled in a decameter-scale in-situ stimulation experiment. Solid Earth Discussions 10.5194/se-2017-79 (2018).
Keusen, H.R, Ganguin, J, Schuler, P . & Buletti, M. Felslabor Grimsel Geologie Nagra Technischer Bericht NTB 87-14. 166 NAGRA & GEOTEST (1989).
Schaltegger, U. The Central Aar Granite: Highly differentiated calc-alkaline magmatism in the Aar Massif (Central Alps, Switzerland). Eur. J. Mineral. 245–260 10.1127/ejm/2/2/0245 (1990).
Steck, A. Die alpidischen Strukturen in den Zentralen Aaregranite des westlichen Aarmassivs. Eclogae Geol. Helv. 61 (1): 19–48 (1968).
Wehrens, P., Baumberger, R., Berger, A. & Herwegh, M. How is strain localized in a meta-granitoid, mid-crustal basement section? Spatial distribution of deformation in the central Aar massif (Switzerland). J. Struct. Geol. 94, 47–67 (2017).
Ziegler, M., Loew, S. & Moore, J. R. Distribution and inferred age of exfoliation joints in the Aar Granite of the central Swiss Alps and relationship to Quaternary landscape evolution. Geomorphology 201, 344–362 (2013).
Schneeberger, R. et al. Methods and uncertainty-estimations of 3D structural modelling in crystalline rocks: A case study. Solid Earth 23, 987–1002 (2017).
Schaltegger, U. & Corfu, F. The age and source of late Hercynian magmatism in the central Alps: evidence from precise U−Pb ages and initial Hf isotopes. Contrib. Mineral. Petrol. 111, 329–344 (1992).
Wenning, Q., Madonna, C., de Haller, A. & Burg, J.-P. Permeability and seismic velocity anisotropy across a ductile-brittle fault zone in crystalline rock. J. Geophys. Res. – Solid Earth 9, 683–698 (2018).
Oberhänsli, R. Geochemistry of meta-lamprophyres from the Central Swiss Alps. Schweiz. Mineral. Petrogr. Mitteilungen 66.3, 315–342 (1986).
Challandes, N., Marquer, D. & Villa, I. M. P-T-t modelling, fluid circulation, and 39Ar-40Ar and Rb-Sr mica ages in the Aar Massif shear zones (Swiss Alps). Swiss J. Geosci. 101, 269–288 (2008).
Goncalves, P., Oliot, E., Marquer, D. & Connolly, J. a. D. Role of chemical processes on shear zone formation: an example from the Grimsel metagranodiorite (Aar massif, Central Alps). J. Metamorph. Geol. 30, 703–722 (2012).
Bergemann, C. et al. Th‐Pb ion probe dating of zoned hydrothermal monazite and its implications for repeated shear zone activity: An example from the Central Alps, Switzerland. Tectonics 36, 671–689 (2017).
Wehrens, P., Berger, A., Peters, M., Spillmann, T. & Herwegh, M. Deformation at the frictional-viscous transition: Evidence for cycles of fluid-assisted embrittlement and ductile deformation in the granitoid crust. Tectonophysics 693, 66–84 (2016).
Choukroune, P. & Gapais, D. Strain pattern in the Aar Granite (Central Alps): Orthogneiss developed by bulk inhomogeneous flattening. J. Struct. Geol. 5, 411–418 (1983).
Gapais, D. et al. Bulk kinematics from shear zone patterns: some field examples. J. Struct. Geol. 9, 635–646 (1987).
Marquer, D., Gapais, D. & Capdevilla, R. Chemical-changes and mylonitization of a granodiorite within low-grade metamorphism (Aar massif, central Alps). Bullet Mineral 108, 209–221 (1985).
Vogler, D. et al. Experiments and Simulations of Fully Hydro‐Mechanically Coupled Response of Rough Fractures Exposed to High‐Pressure Fluid Injection. J. Geophys. Res. Solid Earth 123, 1186–1200 (2018).
Vogler, D., Walsh, S. D. C., Bayer, P. & Amann, F. Comparison of Surface Properties in Natural and Artificially Generated Fractures in a Crystalline Rock. Rock Mech. Rock Eng. 50, 2891–2909 (2017).
Vogler, D., Amann, F., Bayer, P. & Elsworth, D. Permeability Evolution in Natural Fractures Subject to Cyclic Loading and Gouge Formation. Rock Mech. Rock Eng. 49, 3463–3479 (2016).
Doetsch, J. et al. Characterizing fractures and shear zones in crystalline rock using anisotropic seismic inversion and GPR imaging. EGU General Assembly Conference Abstracts 19 (2017).
Krietsch, H. et al. Stress measurements for an in-situ stimulation experiment in crystalline rock: Integration of induced seismicity, stress relief and hydraulic methods. Rock Mech. Rock Eng. Special Issue: Hydraulic Fracturing of Hard Rock, DOI:10.1007/s00603-018-1597-8 (2018).
Jalali, M. R. et al. Transmissivity Changes and Microseismicity Induced by Small-scale Hydraulic Fracturing Tests in Crystalline Rock. Geophys Res. Lett. 45 doi: 10.1002/2017GL076781 (2018).
Jalali, M. R. et al. A Multi-Scale Approach to Identify and characterize the Preferential Flow Paths of a Fractured Crystalline Rock. 2nd International Discrete Fracture Network Engineering (DFNE) (2018).
Illman, W. A. & Tartakovsky, D. M. Asymptotic Analysis of Cross‐Hole Hydraulic Tests in Fractured Granite. Groundwater 44, 555–563 (2006).
Brixel, B., Jalali, M. R., Klepikova, M. & Loew, S. Joint-analysis of hydraulic properties and cross-borehole pressure responses to characterize heterogeneous discrete fractured media. EGU General Assembly Conference Abstracts 20 (2018).
Brixel, B., Jalali, M. R., Klepikova, M., Amann, F. & Loew, S. Hydraulic metrics & fingerprints: Development of sound test procedures & analytical framework to evaluate permeability enhancement.14th Swiss Geoscience Meeting (2016).
Brixel, B., Klepikova, M., Jalali, M. R., Amann, F. & Loew, S. High-resolution cross-borehole thermal tracer testing in granite: preliminary field results. EGU Ge01neral Assembly Conference Abstracts 19 (2017).
Kittilä, A. et al. Comparison of novel synthetic DNA nano-colloid tracer and classic solute tracer behaviour. EGC European Geothermal Congress 2016 (2016).
Kittilä, A., Evans, K. F., Jalali, M. R., Willmann, M. & Saar, M. O. DNA nanotracers in characterization of stimulation enhanced pore space in fractured rock. 44th IAH 2017 Congress (2017).
Giertzuch, P.-L. et al. Monitoring salt tracer transport in granite rock using ground penetrating radar reflection imaging. 17th International Conference on Ground Penetrating Radar (2018).
Data Citations
Krietsch, H. et al. ETH Zurich https://doi.org/10.3929/ethz-b-000243199 (2018)
Acknowledgements
The ISC is a project of the Deep Underground Laboratory at ETH Zurich, established by the Swiss Competence Center for Energy Research - Supply of Electricity (SCCER-SoE) with the support of the Swiss Commission for Technology and Innovation (CTI). Funding for the ISC project was provided by the ETH Foundation with grants from Shell and EWZ and by the Swiss Federal Office of Energy through a P&D grant. Hannes Krietsch is supported by SNF grant 200021_169178. We are thankful for fruitful discussion with Raphael Schneeberger and Bernard Brixel. The Grimsel Test Site is operated by Nagra, the National Cooperative for the Disposal of Radioactive Waste. We are indebted to Nagra for hosting the ISC experiment in their GTS facility and to the Nagra technical staff for onsite support.
Author information
Authors and Affiliations
Contributions
The tunnels were mapped by H.K. H.K. and F.A. performed the core-logging. H.K., V.G., and F.A. performed the geophysical borehole logging. J.D. processed the geophysical data (seismic tomography and ground-penetrating radar) and M.J. the hydrogeological data. S.L. helped with writing the paper and interpreting the geological data. N.D. and H.K. built the geological visualization tool.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
ISA-Tab metadata
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/ The Creative Commons Public Domain Dedication waiver http://creativecommons.org/publicdomain/zero/1.0/ applies to the metadata files made available in this article.
About this article
Cite this article
Krietsch, H., Doetsch, J., Dutler, N. et al. Comprehensive geological dataset describing a crystalline rock mass for hydraulic stimulation experiments. Sci Data 5, 180269 (2018). https://doi.org/10.1038/sdata.2018.269
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/sdata.2018.269
- Springer Nature Limited
This article is cited by
-
Numerical evaluation of the suitability of the equivalent porous medium model for characterizing the two-dimensional flow field in a fractured geologic medium
Hydrogeology Journal (2023)
-
In situ observation of helium and argon release during fluid-pressure-triggered rock deformation
Scientific Reports (2020)