Abstract
In-plane transition-metal dichalcogenides (TMDs) quantum wells have been studied on the basis of first-principles density functional calculations to reveal how to control the electronic structures and the properties. In collection of quantum confinement, strain and intrinsic electric field, TMD quantum wells offer a diverse of exciting new physics. The band gap can be continuously reduced ascribed to the potential drop over the embedded TMD and the strain substantially affects the band gap nature. The true type-II alignment forms due to the coherent lattice and strong interface coupling suggesting the effective separation and collection of excitons. Interestingly, two-dimensional quantum wells of in-plane TMD can enrich the photoluminescence properties of TMD materials. The intrinsic electric polarization enhances the spin-orbital coupling and demonstrates the possibility to achieve topological insulator state and valleytronics in TMD quantum wells. In-plane TMD quantum wells have opened up new possibilities of applications in next-generation devices at nanoscale.
Similar content being viewed by others
Introduction
Interest in achieving atomic thin two-dimensional materials has increased since the successful access of graphene1. Hereinto, a class of quasi-two-dimensional transition-metal dichalcogenides (TMDs, i.e. MX2 with M being Mo or W, while X being S, Se and Te) has been spurring an intensive research activity due to their exotic physical and optical properties2,3,4. A diverse range of possibilities of applications in next-generation flexible nanodevices has been unraveled in TMDs5,6,7,8. MoS2 monolayer, for example, is gaining in importance as promising channel material for field-effect transistors with the on/off ratio exceeding 10^89.
In 2014, in-plane TMD heterostructures have been realized experimentally10,11,12,13,14. As a central concept in modern materials science and technology15,16, with the formation of one-dimensional interfaces, in-plane TMD heterostructures visualize the interfacing of two-dimensional semiconductor materials. It is highly interesting that the perfect match in the in-plane monolayer heterostructures of two constituent TMDs marks the ultimate thickness limit for junctions between semiconducting materials up to now14. In contrast to the vertically stacked TMD heterobilayers17,18,19,20, which are held together by weak Van der Waals forces, atoms of constituent TMDs located at the heterointerfaces are linked by covalent bonds, due to which the in-plane TMD heterostructures ensure the epitaxial quality and thus boost the optical and electronic performance of the heterostructures. In in-plane heterostructures, distinct difference in electronic and optical features between the two joined TMDs gives rise to the importance and interest of such heterostructures. As an example, in-plane heterostructures of TMDs demonstrate type-II band alignment with electrons and holes confined at opposite sides of the interface, enabling efficient separation and collection of excitons12,13. In addition, atomically sharp interfaces and coherent lattice could generate strongly localized photoluminescence enhancement and intrinsic p-n junctions in in-plane TMD heterostructures11,12,13. The formation of in-plane TMD heterostructures has opened up new unprecedented opportunities to engineer two-dimensional heteromaterials with exciting new physics and applications in electronics, optoelectronics, photovoltaics, as well as photocatalysts.
In this article, we extend the concept of TMD interfaces to TMD quantum wells in light of the advances in experiments. In principle, the quantum confinement effects will add to the properties and offer new phenomenon in quantum wells. In in-plane quantum wells of TMDs, in particular, the intrinsic polarization filed and the piezoelectric polarization induced by strain will also play an important role to collectively control the electronic structures. In conjunction with other ways, for example, doping and applying external electric filed, exciting properties concealed in diverse TMD quantum wells are expected to be unraveled. Aiming at revealing how these factors and the thickness of embedded TMD will affect the electronic properties, the first-principles density functional theory (DFT) calculations have been performed and the results indicate that TMD quantum wells hold great promise in a wide range of applications.
Results and Discussion
In comparison to the bulk counterparts, indirect-direct band gap crossover occurs in TMD monolayers due to the absence of inversion symmetry21. The band structures of TMD monolayers share similarities (see Figure S1, supplementary information), with the direct band gap located at the K-point of two-dimensional hexagonal Brillouin zone. In TMD monolayers, edge states at Γ- and K-point exhibit distinct behavior with respect to the interlayer interaction, strain and external electric filed due to the different wave function characters. This has been confirmed, for example, by the indirect-direct band gap transition in MoS2/WS2 heterobilayers due to the change of valence band maximum (VBM) position at the Γ-point as a function of the interlayer distance22,23. As discussed later, such a similar phenomenon can also be found in in-plane TMD quantum wells; the position of band edge will be substantially affected by the intrinsic electric polarization, strain induced by lattice mismatch as well as the thickness of embedded TMD. In TMD monolayers, giant spin-splitting of VBM at the K-point caused by spin-orbital coupling occurs, as a consequence of the loss of inversion symmetry in the monolayer case24,25. In in-plane quantum wells of TMDs, as discussed later, such a spin degeneracy of VBM is dramatically broken by intrinsic electric polarization. Table 1 summarizes the lattice constant a of TMD monolayers; and our results at PBE level of theory are in excellent agreement with previous theoretical results26.
In addition to the quantum confinement effects, the lattice mismatch of constituent TMDs gives rise to strain in the interface region (or piezoelectric polarization), further affecting the electronic features of TMD quantum wells. It implies that
-
1
In the case of large compressive strain (see the lattice constant summarized in Table 1), i.e., in WS2/MoTe2/WS2 and WSe2/MoTe2/WSe2 quantum wells, band structures demonstrate an indirect band gap, with VBM at the Γ-point significantly higher than that at the k-point on two-thirds way from the Γ- to K-point (referred to as A-point), see Figures S2(a,b), supplementary information.
-
2
In the case of large tensile strain, i.e., in WTe2/MoS2/WTe2 and WTe2/MoSe2/WTe2 quantum wells, the band structures reveal metallic characters, see Figures S2(c,d), supplementary information.
-
3
In the absence of strain, i.e., in MoS2/WS2/MoS2 and WS2/MoS2/WS2 quantum wells, band structures indicate direct band gap; both the conduction band minimum (CBM) and VBM locate at the A-point, see Figures S3(a,c), supplementary information. The energy difference between VBM at Γ- and A-point is rather small. As discussed later, nevertheless, increasing the thickness of embedded WS2 or MoS2 can shift the position of VBM at the Γ-point upward and gives rise to a direct-indirect band gap crossover in the MoS2/WS2/MoS2 and WS2/MoS2/WS2 quantum wells. This is caused by the change in intrinsic electric polarization.
-
4
In the presence of relatively small compressive strain, i.e., in MoS2/WSe2/MoS2 and WS2/MoSe2/WS2 quantum wells, band structures show direct band gap located at the A-point. The energy difference between VBM at Γ- and A-point is relatively large, see Figures S3(b,d), supplementary information.
-
5
The electronic structures of TMD quantum wells could be engineered by adjusting the strain.
It should be pointed out that TMD quantum wells with large compressive strain are probably unrealistic to realize in experiments due to the huge asymmetry in mechanical instability in two-dimensional structures (see below). However, we present the results in this work as extreme cases to show how the strain adjust the electronic properties. In other words, applying appropriate external strain (from compressive to tensile) to a certain TMD quantum well can also engineer the electronic properties.
In this work, we constructed a rectangular unit cell for the calculations, as shown in Fig. 1(a,b). In this model, dimension in a direction is infinite due to the periodic bound condition, while in b direction the length is around 70 Å. As a consequence, the band structures should be calculated in a two-dimensional rectangular Brillouin zone; however, we confirm that the band dispersion relation normal to the zigzag interfaces completely reflects the decisive characters of the band structures and we show the band structures in Γ-X direction. Although the experiments suggested in-plane TMD heterointerfaces in triangular shape with three-fold symmetry, interfacing is along the zigzag direction10,11,12,13,14 and this asymmetric nature is not necessary to consider in our calculations. It should be pointed out that the zigzag direction of interfacing in TMD quantum wells corresponds to the Γ-K direction of the two-dimensional hexagonal Brillouin zone, as indicated in Fig. 2(a). In consideration of band folding, the K-point of the hexagonal Brillouin zone is folded to the A-point of the rectangular Brillouin zone. In other words, that is why the VBM at Γ- and A-point manifests strong sensitivity to the interaction of constituent TMDs, as found in TMD heterobilayers22,23,27.
In MoS2/WS2/MoS2, WS2/MoS2/WS2 and MoS2/WSe2/MoS2 quantum wells, VBM and CBM wave functions distribute at opposite constituents, as shown in Figures S4(a–f), supplementary information. It indicates, in particular, the formation of type-II alignment. In low-dimensional structures, many-body effects are highlighted with the appearance of lowest-energy bound excitons, assigned to which the large binding energy28,29, the excitonic effects dominate the optical absorption properties. In in-plane quantum wells of TMDs, electrons and holes are confined at opposite constituent TMDs, facilitating the separation and collection of excitons. In particular, a type-II alignment accounts for the charge-transfer excitonic effects suggesting the possibility to realize the Bose-Einstein condensation30,31, as indicated theoretically in hydrogenated graphene32,33. Although the vertical TMD heterobilayers have also been considered to be type-II alignment34,35, a simple superposition of the optical absorption of constituent TMDs is responsible for the total spectrum due to the large interlayer distance35. As a consequence, true type-II alignment is established in in-plane TMD quantum wells ascribed to the coherent lattice and strong interface electronic coupling and the monolayer-like optical properties can be expected. The graphene/TMD heterobilayers are suggested as a potential candidate in constructing the Schottky barrier solar cells36; however, the coupling between TMD and graphene is quite weak37,38,39. As discussed later, an effective band bending could be established in in-plane TMD quantum wells due to the charge transfer across interfaces. In respect to the photocatalytic water splitting of TMD40, formation of type-II alignment reduces the overlap of wave functions and enables effective separation of electrons and holes, thus improving the energy conversion efficiency. In essence, TMD quantum wells conceal the yet untapped potential as building blocks in applications in electronics and optoelectronics.
In the case of WS2/MoSe2/WS2 quantum well, both the VBM and CBM are distributed on MoSe2, see Figure S4(g,h), supplementary information. Taking the formation of excitons and carriers confinement effects into account, WS2/MoSe2/WS2 quantum wells shall enrich the photoluminescence properties of TMD materials. In order to get more details, we increases the width of WS2 and vary the thickness of MoSe2 from n = 1 to 4; while n corresponds to the number of MoSe2 units in a unit cell of the WS2/MoSe2/WS2 quantum well. Although the thickness of embedded MoSe2 is rather small, namely, when n = 1 or 2, the results for them are presented to see the change of electronic structures as a function of the thickness and get the main trends.
Figure 3 shows the evolution of band structure of WS2/MoSe2/WS2 quantum well with the thickness of MoSe2 varying from n = 1 to 4. The band gap locates at the A-point and almost linearly decreases with the increasing of MoSe2 thickness, as indicated in Fig. 1(b). In Fig. 3, the arrows represent the change of VBM position at the Γ-point and CBM position at the A-point. As MoSe2 thickness increases, both VBM at the Γ-point and CBM at the A-point shift downward; mini-bands tend to form at the bottom of conduction band. At the Γ-point, a gradual increase of an energy level can be traced in the band structures. It can be reasonably extrapolated that this energy level will further increase as the MoSe2 thickness increases and a direct-indirect band gap crossover can be foreseen when the MoSe2 thickness is beyond a critical value. It should be pointed out that the band gap of the WS2/MoSe2/WS2 quantum well will probably approach to a constant value (on the basis of band alignment of WS2 and MoSe2) when the thickness of MoSe2 is sufficiently large. As the thickness of MoSe2 increases within a limitation, the electric field becomes stronger and the gap nature can be continuously tuned41,42. Figure 1(c) indicates the binding energy of forming the quantum well, defined as the energy difference between the quantum well and the constituent TMDs. The binding energies of WS2/MoSe2/WS2 quantum wells are fairly negative, revealing the formation of covalent bonds and rapidly to be convergent due to the effective screening of the interface interactions as the MoSe2 thickness increases.
In addition to form the covalent bonds, charge transfer occurs at the one-dimensional interfaces along zigzag direction. As shown in Fig. 2(b), directions of charge transfer at interfaces are identical thus, importantly, creating an electric field over the embedded TMD in the quantum wells. The piezoelectric polarization induced by the strain also plays a role in promoting the charge transfer to give rise the electric field over the embedded TMD in the quantum wells. The charge-transfer induced electric field leads to a potential drop over the embedded TMD and makes the electron and hole states to separate. As the thickness of embedded TMD increases, electron and hole energy becomes close and thus the band gap is significantly reduced. A similar phenomenon has also been found in GaN/InN/GaN and GaAs/Ge/GaAs quantum wells41,42. In TMD quantum wells studied in this work, quantum confinement effects compete with the electric field to reserve the large band gap in comparison to the monolayer counterparts. In addition to decrease the band gap, the intrinsic electric field raises the VBM position at the Γ-point at the same time and tend to arise an indirect band gap. It can be seen that states at the Γ-point show substantial susceptibility to the strain and intrinsic electric filed. It thus provides us with a possibility to tune the electronic properties of TMD quantum wells by carrier doping, adjusting the strain and thickness and applying external electric field. As demonstrated in Figure S4, the localization of VBM and CBM is also a result of the intrinsic electric field43,44.
In case of WS2/MoSe2/WS2 quantum well, both VBM and CBM are predominantly distributed on embedded MoSe2, as shown in Fig. 4. As the MoSe2 thickness increases, the VBM and CBM tend to separate each other to locate at opposite sides of MoSe2 due to the intrinsic electric field, reducing the band gap. However, the separation reduces the recombination efficiency and thus affects the application in light emitting. In addition, charge transfer gives rise to band bending in constituent TMDs and strain-induced piezoelectric polarization results in quantum-confined Stark effect. As a result, further works are in need to omit these factors by, for example, carrier doping, to well confine the carriers in the wells.
In MoTe2/WS2/MoTe2 quantum well, relatively large tensile strain is imposed on WS2. As discussed above, direct-indirect band gap crossover is presented due to the upward shift of VBM at the Γ-point as WS2 thickness being n = 5, as shown in Figure S5. Figure 5(a) summarizes the direct and indirect band gap values, which are smaller than 1.0 eV. The indirect band gap linearly decreases as the WS2 thickness increases to n = 4 and then tend to be convergent; the convergence of direct band gap is faster than that of indirect one. In comparison to WS2/MoSe2/WS2 quantum well, the behavior of band edge states show similar trends; however, a difference lies in the obviously smaller band gap of the MoTe2/WS2/MoTe2 quantum wells. In the case of n = 4, for example, the band gap of WS2/MoSe2/WS2 quantum well is 1.56 eV, while MoTe2/WS2/MoTe2 quantum well corresponds to a band gap of 0.61 eV. In WS2/MoSe2/WS2 quantum well, direct-indirect band gap crossover occurs with significantly larger MoSe2 thickness than WS2 due to the faster rise of VBM at the Γ-point in MoTe2/WS2/MoTe2 quantum wells. When n = 4, the density of states (DOS) plots projected on MoTe2 and WS2 are shown in Fig. 5(b), which reveals a type-I alignment with both VBM and CBM located on MoTe2. In contrast to the WS2/MoSe2/WS2 quantum well, however, the VBM and CBM are spatially separated striding the embedded WS2, see Fig. 5(c,d). In the presence of intrinsic electric filed, electron and hole wave functions are localized at opposite sides and such a localization is conducive to reduce the band gap. As a result, MoTe2/WS2/MoTe2 quantum wells manifest themselves to be promising candidates used in solar energy absorption and conversion. It is of interest and importance, fairly small band gap and physical separation of electron-hole pairs demonstrate the new possibility in achieving solar cells and photocatalysts within infrared or near infrared light region.
In GaN/InN/GaN and GaAs/Ge/GaAs quantum wells41,42, the intrinsic polarization can reduce the band gap and enhance the spin-orbital coupling (SOC) effects, driving the system to a topological insulator state. In this work, we confirm the enhanced SOC in the MoTe2/WS2/MoTe2 quantum well, see Figure S6, supplementary information. In TMD quantum wells, further works to realize the possibility of topological insulator states are worthy. In MoS2 monolayer, inversion symmetry breaking gives rise to the valley Hall effect in presence of an in-plane electric field45. At the end of this work, we remark that the emergent valleytronics and spintronics in TMD quantum wells are waiting for further exploration.
Conclusion
In conclusion, we found that TMD quantum wells offer exciting new physics and hold great promise as building blocks in applications in electronics, optoelectronics as well as photocatalysts. The quantum confinement effects, strain and, in particular, intrinsic electric field collectively control the electronic structures of TMD quantum wells, which can be further controlled by artificial means to gain the desired properties. Additionally to induce large spin-orbital interaction, the sizable band gap in TMD materials can be substantially reduced and the gap nature can be controlled. It also invites further studies to realize the possibility of topological insulator states and the emergent valleytronics in such TMD quantum wells.
Methods
The first-principles DFT calculations were performed using the projector augmented wave (PAW) scheme, as implemented in the plane-wave basis code VASP (Vienna ab initio simulation package)46,47. The generalized gradient approximation (GGA)48 as formulated by Perdew-Burke-Ernzerhof (PBE)49 has been introduced for exchange and correlation contributions. A cutoff energy of 400 eV was chosen for the plane-wave expansion of wave functions and the Monkhorst-Pack scheme of k-point sampling has been adopted for the integration over the first Brillouin zone50: 13 × 13 surface grid was used to relax the two-dimensional TMD monolayers while 8 × 4 for TMD quantum wells, with the residual Hellmann-Feynman forces smaller than 0.02 eV/Å within conjugate gradient algorithm. Gaussian smearing was used to address how the partial occupancies are set for each wave function. Slab models with vacuum spacing of 18 Å was adopted to eliminate the spurious interactions between periodic imagines. Figure 1(a) shows the atomic model of TMD quantum well, in which the width of sandwiching TMD was maintained large enough in order to eliminate the effects induced by the interaction of embedded TMDs. After obtaining the optimized lattice constants of TMD monolayers, we constructed a rectangular unit cell of enough width to build quantum well structures. In the considered TMD quantum wells, on account of the experimental observation10,11,12,13,14, interfaces between constituent TMDs were constructed along the zigzag direction by atom substitution followed by full atomic relaxation. In this work, the lattice constants of embedded TMDs were set as that of sandwiching TMD in the calculations to mimic the laterally epitaxial growth of TMD and thus strain could be induced to the embedded TMDs10,11,12,13,14. According to the definition in a previous work51, these two-dimensional in-plane TMD A/B/A sandwich structures can be referred to as quantum wells, instead of superlattices. It should be pointed out that an interesting mechanical property of any two-dimensional layer is the existence of a huge asymmetry in mechanical instability induced by in-plane strain, which is always overlooked by many DFT calculations52. In our calculations, the compressive strain-induced structure undulation was not found due to the rather small size of embedded TMDs. In consideration of mechanical instability asymmetry, the electronic properties could be different; however, results for quantum wells with significantly large compressive strain induced on the embedded TMDs are helpful for well understanding the interfacing effects on the electronic structures. Although the hybrid functional or GW calculations can give band gaps more accurate, it is unrealistic to adopt for the large TMD quantum wells models considered in this work and we confirmed that PBE results can correctly give the main features and key trends.
Additional Information
How to cite this article: Wei, W. et al. Controlling the Electronic Structures and Properties of in-Plane Transition-Metal Dichalcogenides Quantum Wells. Sci. Rep. 5, 17578; doi: 10.1038/srep17578 (2015).
References
Novoselov, K. S. et al. Electric Field Effect in Atomically Thin Carbon Films. Science 306, 666–669 (2004).
Geim, A. K. & Grigorieva, I. V. van der Waals Heterostructures. Nature 499, 419–425 (2013).
Radisavljevic, B., Radenovic, A., Brivio, J., Giacometti, V. & Kis, A. Single-Layer MoS2 Transistors. Nature Nanotech. 6, 147–150 (2011).
Wang, Q. H., Kalantar-Zadeh, K., Kis, A., Coleman, J. N. & Strano, M. S. Electronics and Optoelectronics of Two-Dimensional Transition Metal Dichalcogenides. Nature Nanotech. 7, 699–712 (2012).
Britnell, L. et al. L. A. Field-Effect Tunneling Transistor Based on Vertical Graphene Heterostructures. Science, 335, 947–950 (2012).
Britnell, L. et al. Strong Light-Matter Interactions in Heterostructures of Atomically Thin Films. Science 340, 1311–1314 (2013).
Zhang, Y., Oka, T., Suzuki, R., Ye, J. & Iwasa, Y. Electrically Switchable Chiral Light-Emitting Transistor. Science 344, 725–728 (2014).
Pospischil, A., Furchi, M. M. & Mueller, T. Solar-Energy Conversion and Light Emission in an Atomic Monolayer p-n Diode. Nature Nanotech. 9, 257261 (2014).
Radisavljevic, B. & Kis, A. Mobility Engineering and a Metal-Insulator Transition in monolayer MoS2 . Nature Mater. 12, 815–820 (2013).
Zhang, X.-Q., Lin, C.-H., Tseng, Y.-W., Huang, K.-H. & Lee, Y.-H. Synthesis of Lateral Heterostructures of Semiconducting Atomic Layers. Nano Lett. 15, 410–415 (2015).
Duan, X. et al. Lateral Epitaxial Growth of Two-Dimensional Layered Semiconductor Heterojunctions. Nature Nanotechnol. 9, 1024–1030 (2014).
Huang, C. et al. Lateral Heterojunctions within Monolayer MoSe2-WSe2 Semiconductors. Nature Mater. 13, 1096–1011 (2014).
Gong, Y. et al. Vertical and In-Plane Heterostructures from WS2/MoS2 Monolayers. Nature Mater. 13, 1135–1142 (2014).
Duesberg, G. D. Heterojunctions in 2D Semiconductors: a Perfect Match. Nature Mater. 13, 1075–1076 (2014).
Ponomarenko, L. A. et al. Cloning of Dirac Fermions in Graphene Superlattices. Nature 497, 594–597 (2013).
Dean, C. R. et al. Hofstadter’s Butterfly and the Fractal Quantum Hall Effect in Moiré Superlattices. Nature 497, 598–602 (2013).
Yu, W. J. et al. Highly Efficient Gate-Tunable Photocurrent Generation in Vertical Heterostructures of Layered Materials. Nature Nanotech. 8, 952–958 (2013).
Hong, X. et al. Ultrafast Charge Transfer in Atomically Thin MoS2/WS2 Heterostructures. Nature Nanotech. 9, 682–686 (2014).
Yu, W. J. et al. Vertically Stacked Multi-Heterostructures of Layered Materials for Logic Transistors and Complementary Inverters. Nature Mater. 12, 246–252 (2013).
Jones, A. M. et al. Spin-Layer Locking Effects in Optical Orientation of Exciton Spin in Bilayer WSe2 . Nature Phys. 10, 130–134 (2014).
Mak, K. F., Lee, C., Hone, J., Shan, J. & Heinz1, T. F. Atomically Thin MoS2: A New Direct-Gap Semiconductor. Phys. Rev. Lett. 105, 136805 (2010).
Komsa, H.-P. & Krasheninnikov, A. V. Electronic Structures and Optical Properties of Realistic Transition Metal Dichalcogenide Heterostructures from First Principles. Phys. Rev. B 88, 085318 (2013).
Tongay, S. et al. Tuning Interlayer Coupling in Large-Area Heterostructures with CVD-Grown MoS2 and WS2 Monolayers. Nano Lett. 14, 3185–3190 (2014).
Zhu, Z. Y., Cheng, Y. C. & Schwingenschögl, U. Giant Spin-Orbit-Induced Spin Splitting in Two-Dimensional Transition-Metal Dichalcogenide Semiconductors. Phys. Rev. B 84, 153402 (2011).
Molina-Sánchez, A., Sangalli, D., Hummer, K., Marini, A. & Wirtz, L. Effect of Spin-Orbit Interaction on the Optical Spectra of Single-Layer, Double-layer and Bulk MoS2 . Phys. Rev. B 88, 045412 (2013).
Ramasubramaniam, A. Large Excitonic Effects in Monolayers of Molybdenum and Tungsten Dichalcogenides. Phys. Rev. B 86, 115409 (2012).
Kou, L., Frauenheim, T. & Chen, C. Nanoscale Multilayer Transition-Metal Dichalcogenide Heterostructures: Band Gap Modulation by Interfacial Strain and Spontaneous Polarization. J. Phys. Chem. Lett. 4, 1730–1736 (2013).
Wei, W. & Jacob, T. Electronic and Optical Properties of Fluorinated Graphene: A Many-Body Perturbation Theory Study. Phys. Rev. B 87, 115431 (2013).
Wei, W. & Jacob, T. Strong Excitonic Effects in the Optical Properties of Graphitic Carbon Nitride g-C3N4 from First Principles. Phys. Rev. B 87, 085202 (2013).
Butov, L. V., Lai, C. W., Lvanov, A. L., Gossard, A. C. & Chemla, D. S. Towards Bose-Einstein Condensation of Excitons in Potential Traps. Nature 417, 47–52 (2002).
Snoke, D., Denev, S., Liu, Y., Pfeiffer, Y. & West, K. Long-Range Transport in Excitonic Dark States in Coupled Quantum Wells. Nature 418, 754–757 (2002).
Cudazzo, P., Attaccalite, C., Tokatly, I. V. & Rubio, A. Strong Charge-Transfer Excitonic Effects and the Bose-Einstein Exciton Condensate in Graphane. Phys. Rev. Lett. 104, 226804 (2010).
Wei, W. & Jacob, T. Strong Charge-Transfer Excitonic Effects in C4H-Type Hydrogenated Graphene. Phys. Rev. B 86, 165444 (2012).
Komsa, H.-P. & Krasheninnikov, A. V. Electronic Structures and Optical Properties of Realistic Transition Metal Dichalcogenide Heterostructures from First Principles. Phys. Rev. B 88, 085318 (2013).
Kośmider, K. & Fernández-Rossier, J. Electronic Properties of the MoS2-WS2 Heterojunction. Phys. Rev. B 87, 075451 (2013).
Bernardi, M., Palummo, M. & Grossman, J. C. Extraordinary Sunlight Absorption and One Nanometer Thick Photovoltaics Using Two-Dimensional Monolayer Materials. Nano Lett. 13, 3664–3670 (2013).
Ma, Y., Dai, Y., Guo, M., Niu, C. & Huang, B. Graphene Adhesion on MoS2 Monolayer: An ab initio Study. Nanoscale 3, 3883–3887 (2011).
Ma, Y. et al. First-Principles Study of the Graphene@MoSe2 Heterobilayers. J. Phys. Chem. C 115, 20237–20241 (2011).
Ma, Y. et al. Electronic and Magnetic Properties of Perfect, Vacancy-Doped and Nonmetal Adsorbed MoSe2, MoTe2 and WS2 Monolayers. Phys. Chem. Chem. Phys. 13, 15546–15553 (2011).
Karunadasa, H. I. et al. A Molecular MoS2 Edge Site Mimic for Catalytic Hydrogen Generation. Science 335, 698–702 (2012).
Miao, M. S. et al. Polarization-Driven Topological Insulator Transition in a GaN/InN/GaN Quantum Well. Phys. Rev. Lett. 109, 186803 (2012).
Zhang, D., Lou, W., Miao, M., Zhang, S.-C. & Chang, K. Interface-Induced Topological Insulator Transition in GaAs/Ge/GaAs Quantum Wells. Phys. Rev. Lett. 111, 156402 (2013).
Kang, J., Li, J., Li, S.-S., Xia, J.-B. & Wang, L.-W. Electronic Structural Moiré Pattern Effects on MoS2/MoSe2 2D Heterostructures. Nano Lett. 13, 5485–5490 (2013).
Ramasubramaniam, A., Naveh, D. & Towe, E. Tunable Band Gaps in Bilayer Transition-Metal Dichalcogenides. Phys. Rev. B 84, 205325 (2011).
Xiao, D., Liu, G.-B., Feng, W., Xu, X. & Yao, W. Coupled Spin and Valley Physics in Monolayer of MoS2 and Other Group-VI Dichalcogenides. Phys. Rev. Lett. 108, 196802 (2012).
Kresse, G. & Furthmuller, J. Efficient Iterative Schemes for ab Initio Total-Energy Calculations Using a Plane-Wave Basis Set. Phys. Rev. B 54, 11169 (1996).
Kresse, G. & Joubert, J. From Ultrasoft Pseudopotentials to the Projector Augmented-Wave Method. Phys. Rev. B 59, 1758 (1999).
Perdew, J. P. & Wang, Y. Accurate and Simple Analytic Representation of the Electron-Gas Correlation Energy. Phys. Rev. B 45, 13244 (1992).
Perdew, J. P., Burke, K. & Ernzerhof, M. Generalized Gradient Approximation Made Simple. Phys. Rev. Lett. 77, 3865 (1996).
Monkhorst, H. J. & Pack, J. D. Special Points for Brillouin-Zone Integrations. Phys. Rev. B 13, 5188 (1976).
Liu, Z., Wu, J., Duan, W., Lagally, M. G. & Liu, F. Electronic Phase Diagram of Single-Element Silicon “Strain” Superlattices. Phys. Rev. Lett. 105, 016802 (2010).
Zhang, Y. & Liu, F. Maximum Asymmetry in Strain Induced Mechanical Instability of Graphene: Compression versus Tension. Appl. Phys. Lett. 99, 241908 (2011).
Acknowledgements
The authors acknowledges financial support from the National Basic Research Program of China (973 program, 2013CB632401), the National Science Foundation of China under grant 11374190, 21333006 and 11404187; the Taishan Scholar Programof Shandong Provice and the Fundamental Research Funds of Shandong University is also acknowledged.
Author information
Authors and Affiliations
Contributions
Y.D. and B.H. proposed the idea and revised the manuscript. W.W. performed the DFT calculations and wrote the manuscript. C.N. discussed the results.
Ethics declarations
Competing interests
The authors declare no competing financial interests.
Electronic supplementary material
Rights and permissions
This work is licensed under a Creative Commons Attribution 4.0 International License. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder to reproduce the material. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/
About this article
Cite this article
Wei, W., Dai, Y., Niu, C. et al. Controlling the Electronic Structures and Properties of in-Plane Transition-Metal Dichalcogenides Quantum Wells. Sci Rep 5, 17578 (2015). https://doi.org/10.1038/srep17578
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/srep17578
- Springer Nature Limited
This article is cited by
-
Mechanical properties of lateral transition metal dichalcogenide heterostructures
Frontiers of Physics (2021)
-
Misfit Strain-Induced Buckling for Transition-Metal Dichalcogenide Lateral Heterostructures: A Molecular Dynamics Study
Acta Mechanica Solida Sinica (2019)
-
Hexagonal 2H-MoSe2 broad spectrum active photocatalyst for Cr(VI) reduction
Scientific Reports (2016)