Abstract
Topological crystalline insulators are a type of topological insulators whose topological surface states are protected by a crystal symmetry, thus the surface gap can be tuned by applying strain or an electric field. In this paper we predict by means of ab initio calculations a new phase of Bi which is a topological crystalline insulator characterized by a mirror Chern number nM = −2, but not a strong topological insulator. This system presents an exceptional property: at the (001) surface its Dirac cones are pinned at the surface high-symmetry points. As a consequence they are also protected by time-reversal symmetry and can survive against weak disorder even if in-plane mirror symmetry is broken at the surface. Taking advantage of this dual protection, we present a strategy to tune the band-gap based on a topological phase transition unique to this system. Since the spin-texture of these topological surface states reduces the back-scattering in carrier transport, this effective band-engineering is expected to be suitable for electronic and optoelectronic devices with reduced dissipation.
Similar content being viewed by others
Introduction
Topological crystalline insulators (TCIs) are topological insulators (TIs) whose bulk topological invariants rely on the symmetry group of the crystal1. They display metallic surface states which are protected by crystal symmetry. Similarly to the three-dimensional (3D) strong TIs, such as the binary alloys Bi2Se3, Bi2Te3 and Sb2Te32,3,4,5, they hold topological surface states (TSSs) with spin-momentum locking. However, a TSS protected by mirror symmetry does not show up on each surface of the crystal but only in planes normal to the mirror plane6. TCIs are mathematically characterized by a single integer topological invariant, that is the mirror Chern number. Since they do not need to preserve time-reversal symmetry, the surface state is robust against doping with magnetic impurities or magnetic fields as long as the mirror symmetry is preserved1. Nevertheless, it is sufficient to break the mirror symmetries to turn the TSS into a trivial, gapped surface state. TCIs have an advantage compared to strong TIs: TSS can be manipulated by applying strain or an electric field perpendicular to a mirror plane. However, this kind of crystalline protection has also a disadvantage: even if disorder can be used to induce a topological phase transition, impurities and vacancies at the surface sample can accidentally break the mirror plane symmetry. Therefore it is desirable to find new materials with more robust TSS and easily controllable topological phase transition.
Up to now, 3D TCIs have been reported in SnTe6,7,8 and related alloys such as Pb1−xSnxSe/Te9, which incorporate heavy elements with large spin-orbit coupling in a rocksalt crystal structure; they are characterized by a negative mirror Chern number (nM = −2)1,2. Other chalcogenides such as SnS and SnSe10 have also been predicted to be TCIs and a methodology of tuning normal IV-VI semiconducting chalcogenides into TCIs by applying pressure was reported as well11. Besides the narrow-gap IV-VI semiconductors rocksalt structures, a new family of anti-perovskites has been predicted to be a TCI with |nM| = 212; Rauch et al.13 demonstrated that the binary 3D TIs Bi2Te3, Bi2Se3 and Sb2Te3 are dual topological insulators with nM = −1 and a invariant (1;000).
Even though the strong influence of spin-orbit coupling has been recognized in many different properties of Bi14,15 and despite that it is one of the main ingredients in most promising 3D TIs3,16,17,18,19,20, elementary Bi is a semi-metal, which only displays topological properties at low dimensionality21,22,23,24. Recently Aguilera et al.25 demonstrated that the trivial bulk Bi semimetal can be transformed into a TI by applying strain. Much effort is devoted to study experimentally and theoretically Bi bulk and its surfaces, due to its interesting and unique surface properties and to potential applications in spintronics14,15,21,22,23,24,25. Additionally Bi is an interesting candidate for real-world applications: inexpensive, non-toxic, non-radioactive and with a very low density of carriers with high carrier mobility.
In this work we predict, by means of ab initio calculations, a new stable phase of Bi with outstanding properties. First, it is semiconducting with a fundamental band gap of about 160meV. Second, it is a TCI with mirror Chern number nM = −2. Showing the space group 139 (I4/mmm), it exhibits two TSSs at each of the projections of the mirror plane onto the surface Brillouin zone (BZ). We calculate the surface band structure of the (001) surface as well as the spin texture and spin polarization of its TSSs. A remarkable aspect of this new phase is that its Dirac cones are located at surface high-symmetry points, therefore these TSSs are also Kramer’s pairs and remain almost unaltered even in the presence of large strains which break the mirror planes. Although the TSS is protected by time-reversal symmetry, this new phase of Bi does not display topological properties and a band-gap can be open without breaking the time-reversal symmetry. Taking advantage of this dual protection we present a mechanism of strain tunable band-gap, where the TSSs gap is opened by hybridization with one overlayer of adatoms.
Crystal Structure and Topological Invariants
Bismuth shows a rich phase diagram under applied pressure. In the present study we have considered only two of the earlier reported phases: the one at zero pressure which is a rhombohedral structure (Fig. 1a), with a hexagonal cell14,15 that corresponds to the space group 166 (R − 3m)26 and the ground-state at 2.5 GPa which is the so-called Bi-II phase27,28, a C12/m1 monoclinic lattice; it can also be regarded as a strongly distorted simple cubic structure, whose ground state energy at zero pressure lies 70 meV/atom above that of the rhombohedral phase.
Using the minimal hopping method29,30, based on density functional theory for the calculation of energies and forces (see the Methods section), we found a new stable Bismuth structure that at zero pressure has an energy only 6 meV/atom above that of the rhombohedral phase and it is therefore significantly more favorable than the Bi-II phase in absence of applied pressure. This phase, that we will call Bi-139 in the rest of the paper, has the crystal space group 13926 with a point group symmetry I4/mmm, which comprises a fourfold rotational axis and three mirror planes, as depicted in Fig. 1b,c. Four atoms are contained in the unit cell and the lattice parameters read a = 3.26 Å and c = 7.27 Å (see Fig. 1b). As a result, there exist six time-reversal invariant momenta in the Brillouin zone (BZ) (see Fig. 1d). The structure of Bi-139 largely resembles the Bi-II phase but with a body-centered tetragonal Bravais lattice instead of the monoclinic of Bi-II. Detailed crystallographic information are given in the online Supporting Information, while a discussion on the methods used to perform all calculations can be found in the Methods section.
To check the stability of Bi-139 we performed phonon calculations. The phonon band structure, shown in the Supporting information, does not exhibit any imaginary branch, indicating dynamical stability. Therefore, considering the tiny energy difference with respect to the rhombohedral structure, Bi-139 could be experimentally realized by growth on a proper substrate, like PbTe. The effect of a substrate on growth is well-known and it was already studied in Bi thin films28,31,32. Alternatively, due to its similarity with the Bi-II phase, it should be possible to apply strain to Bi-II while decreasing the pressure to obtain Bi-139. We will discuss in the following more in details the effects of strain and their possible applications.
According to Kohn-Sham density functional theory calculations using a Perdew-Burke-Ernzerhof (PBE)33 exchange correlation functional, Bi-139 is a semiconductor with a band gap of about 160 meV. Figure 2a shows the band structure along high symmetry lines of the BZ (depicted in Fig. 1c). Note that the gap is small at a point on the Δ line (i. e. along Γ–X). The densities of states (DOS) of both the rhombohedral and the Bi-139 phase show marginal differences. An exception is that at the Fermi energy rhombohedral Bi exhibits a very small but finite DOS (inset in Fig. 2b), confirming its semimetallic behavior. In contrast, Bi-139 displays strictly zero DOS, indicating a semiconducting behavior.
The topological invariants of the bulk system were calculated using a first-principles-based tight-binding method13. The invariant was obtained by tracking the centers of the Wannier functions along lines within the BZ34, with the result (0;000), indicating a trivial phase. We have also analyzed the inversion of the band structure and found out that the SOC does not invert the bands in this system, confirming the tight-binding results. To obtain information on topological crystalline phase, we have computed the mirror Chern numbers nM for both the (100) and (110) mirror planes (see Fig. 1c), with the result nM = −2 for each of the mirror planes.
From these findings we conclude that Bi-139 is a TCI similar to SnTe6; it is neither a strong nor a weak TI. From the absolute value of the nM’s we predict that there should be two topologically protected surface states at each of the mirror lines of the (001) surface (mirror lines are the projections of the mirror planes onto the surface BZ). Furthermore, the spin chirality of the surface states should be clockwise in the upper half of the Dirac cones because the nM’s are negative.
Surface Electronic Structure
In this section we discuss the Bi-139 (001) surface electronic structure and its spin-texture. Like in rhombohedral Bi (111), the Bi-139 (001) surface does not exhibit any clearly defined structural reconstruction. The electronic structure changes even more dramatically than in rhombohedral Bi, where the surface is considerably better conducting than the bulk15. Figure 3 shows the electronic structure obtained from an ab initio calculation for a slab of 34 atomic layers (thickness ≈6 nm). The TSSs are clearly located at the surface (red bands) while the bands from the inner region of the slab are represented in light blue. Two Dirac cones appear below the Fermi energy: one at and the other at . The Dirac cone at is rather isotropic, in contrast to that at whose upper half exhibits a flat region just below the Fermi energy; in other words, the cone opens up abruptly along this line.
The anisotropy of Dirac cones’ dispersion manifests itself in different Fermi contours (Fig. 4a). While the cone at shows a circular contour, the cone at is anisotropic, with a rather rectangular shape. Since is a corner of the surface BZ each corner shows a quarter of the Dirac cone; the full cone is obtained by replicating the BZ taking as a center.
Since the Γ–X–R–Z plane has nM = −2 another Dirac cone is expected at . The identification of its Dirac point is complicated because the TSS hybridizes with the bulk bands, around +0.5 eV. Other features observed at the Fermi surface correspond to electron unoccupied pockets attributed to the surface state close to .
The spin texture of the Fermi surface (indicated by arrows in Fig. 4a) shows that the helicity induced by spin-orbit coupling is left-handed for all upper cones. This finding fully complies with the negative value of the nM’s. The spin orientation is mostly perpendicular to for the cone at . Furthermore, for the cone at it is also perpendicular to at high-symmetry lines, as dictated by the ‘small group’ of these wave vectors.
Figure 4b shows selected energy contours for both Dirac cones. Over the entire energy range the spin polarization is mostly perpendicular to and almost constant for each cone. The out-of-plane component is exactly zero owing to the combination of the fourfold rotational, mirror and time-reversal symmetries.
Effect of Strain and Applications
From the previous section we learned that the TSSs of this new Bi phase have some important features compared to known topological materials. While this system is a TCI its Dirac cones resemble those of a strong TI (like Bi2Se3): it is isotropic at and pinned at high-symmetry points, i.e.: they cannot move along the high symmetry lines. However, the location of the Dirac cones at these high-symmetry points has an additional, more profound implication: since the Kramer’s theorem is still valid for the surface Brillouin zone, as long as the time-reversal symmetry is preserved, the bands lying at the Kramer’s points must be degenerate. Thus in Bi-139 the Dirac cones remain gapless even if strain or surface impurities break the mirror planes defining nM, as it happens at the surface of SnTe (111)8,35.
To further test the extent of this additional time-reversal protection, we performed band structure calculations applying different elastic deformations which correspond to shear (I), lateral (II) and shear plus lateral (III) strain to the lateral vector of this system. These three types of elastic deformations are described in the following way,
where a is the lateral lattice constant, δ is the porpotionality of strain and the third lattice vector is scaled to keep the cell volume constant:
The proportionality constant α depends on each type of strain. Note that the changes of are very small since they are order of .
From the previous definition it is evident that the shear strain (I) breaks the mirror planes, lateral strain (II) breaks the mirror planes and shear plus lateral strain (III) breaks all the mirror planes of the (001) surface (see Fig. 5a).
The results of applying strain are largely similar for all cases, so only one representative case is shown here and the remaining cases can be found in the Supporting Information. In Fig. 5d,e we display the bulk band structure with lateral strain (according to the scheme in Fig. 5b), for δ = 0 and δ = 0.08, respectively. Note that, due to the lower symmetry, most of the high-symmetry points (like X) are inequivalent in different regions of the Brillouin zone, for simplicity we provide only one of those points to reveal the qualitative changes. For δ = 0.08 a Dirac cone arises in the Γ-X direction and the gap is closed, thus transforming the system from a topological insulator to a trivial semimetal. However, as follows from Fig. 5f,g, the strain does not change significantly surface states at and . At the same time, since the spin-momentum texture happens before the emergence of massive Dirac cones, the back-scattering of carriers in this system should also be reduced significantly compared to other semiconductors even when the crystal symmetry is broken and the surface states become trivial.
Nonetheless, since Bi-139 is not a strong TI, once the mirror symmetry is broken it is possible to open a gap without breaking the time-reversal symmetry by hybridization with a layer of adatoms, for example (schematic plot in Fig. 6, panels (a), (b) and (c)). These properties lead us to a band-structure engineering design like the one sketched in Fig. 6d, where one can find 2 different regions, gapless ones (Fig. 6a type) and regions where a band-gap can be induced by applying strain (like in Fig. 6b,c). The spatially varying gap we find in this system, can be used to construct new devices, such as detection of multy-energy photons in nanomembranes36.
The previous analysis is valid for any TCI (but not a dual TI, like Bi2Se3) with its Dirac cones located at surface high-symmetry points. Such is the case of SnTe (111), however, in this system the time-reversal protection is not as efficient as in Bi-139 because in SnTe (111), due to the small direct bulk energy gap, the Dirac cones lie very close to the bulk bands. On the contrary, in Bi-139 the Dirac cones – except at – are separated by more than 0.5 eV from the closest Kramer’s pair. Another advantage is the absence of resonance states between the bulk and the SS, thus Bi-139 is ideal for devices that require a few-layer gapless nanomembrane.
The remaining challenge is to find a material whose work-function is close to the Bi-139 TSS, like in Fig. 6b. This lies beyond the scope of this paper, but there are several lattice-matched semiconductors that could be used for that purpose.
Summary and Conclusions
We have reported a new Bi semiconducting structure that, without any external strain, is a topological crystalline insulator but not a topological insulator. This structure has a fundamental band gap of about 160 meV. The mirror Chern number nM reads −2 for each of its two inequivalent planes. As a result, two topological surface states with clockwise spin helicity appear at each of the mirror lines. Their Dirac cones show up right below the Fermi energy at and at ; another one is hybridized with the conduction bands at . The spin polarizations are about 50% and 60%, for the and states respectively.
We have shown as well that, despite Bi-139 being a TCI with the same mirror Chern number as SnTe, this system displays some properties that makes it advantageous to SnTe, the Dirac cones of Bi-139 are located at surface high-symmetry points and are protected by time-reversal symmetry, thus Dirac cones must remain gapless even in the presence of weak disorder or impurities, much like in a strong TI. Even if the SnTe (111) surface states have the same nature as the Bi-139 (001) surface state, the time-reversal protection in SnTe is not as efficient as in Bi-139 because the Dirac cones lie very close to the bulk bands, due to the small direct bulk energy gap.
Given the outstanding properties of Bi and the wide range of applicability of TCIs in electronic and spintronics technologies and the excepcional properties of the Dirac cones at the Bi-139 (001) surface, this discovery opens the gate for future fundamental and experimental developments in band-gap engineering based devices.
Methods
Global structural prediction
To obtain the new crystal structure, we have used an implementation of the Minima Hopping Method to perform global structural prediction29,30. This approach has been successfully used in various applications37,38,39. The principles of the method are described in detail in the original refs 29, 30. In summary, this approach performs a systematic ab initio search for low-enthalpy phases of a given compound; the only input is the chemical composition and the number of atoms in the simulated unit cell. Short Rahman-Parrinello molecular dynamics simulation are used to escape from local minima and efficient local geometry relaxations were performed to identify stable configurations. The efficiency of the escape step was ensured by aligning the initial atomic velocities within the molecular dynamics along one of the soft mode Hessian vectors. The energy and stresses are obtained by interfacing the method with the code VASP40,41. To approximate the exchange-correlation functional we used the Perdew-Burke-Ernzerhof (PBE)33 generalized gradient approximation. After the potential structures are identified by the Minima Hopping Method, the minimal energy structures are tightly minimized by increasing the plane wave cutoff and the k mesh such that the calculation guarantees a numerical convergence of the total energy to less than 2 meV/atom.
Electronic structure calculations
The electronic structure calculations of both bulk and surface were performed using VASP with the PBE generalized gradient approximation for the exchange correlation potential33. The interaction between the ion cores and valence electrons was described by the projector augmented-wave method42; the d pseudocore was included as valence for all structure-related tasks. Relativistic effects, including spin-orbit coupling, were taken into account. A 27 × 27 × 18 -points mesh was used for bulk, while for surfaces we used 27 × 27 × 1. The energy cutoff was set to 400 eV. The slab width was 34 atomic layers, which is about 6 nm wide. For slab calculations with external strain the surface relaxation was omitted (the bulk was fully relaxed). To plot the bandstructures and Fermi surfaces the pyProcar program43 was employed.
Phonon calculations
Phonon calculations were performed with the density functional perturbation theory (DFPT)44 as implemented in VASP, using the PBE exchange-correlation functional33. The dynamical matrix obtained from DFPT was unfolded using the Phonopy code45 and the phonon dispersion curves were interpolated from the interatomic force constanst to a sufficient number of points. The calculations were performed including spin-orbit coupling.
Tight Binding Fit
The topological invariants were calculated by means of an ab-initio based tight binding model. The Slater-Koster46 tight binding parameters were fitted to the PBE bulk band structure without spin-orbit coupling included using a Monte Carlo47 method. Subsequently, the spin-orbit constant for the p bands was optimized to reproduce the spin-orbit gaps of the band structure calculation with spin-orbit coupling included. The results are shown in Fig. 7.
Topological Invariants
invariants were calculated by tracking the centers of maximally-localized Wannier functions along lines in the BZ34.
For mirror Chern numbers we used the same approach as for calculating spin Chern numbers48. For each wavevector in the cut of the BZ with the chosen mirror plane the Bloch states were divided into two sub-spaces according to their mirror eigenvalue ±i. For each sub-space the Chern number c±i was calculated as an integral of the Berry curvature49. The mirror Chern number is then given as
Additional Information
How to cite this article: Munoz, F. et al. Topological Crystalline Insulator in a New Bi Semiconducting Phase. Sci. Rep. 6, 21790; doi: 10.1038/srep21790 (2016).
References
Fu, L. Topological crystalline insulators. Phys. Rev. Lett. 106, 106802 (2011).
Teo, J. C. Y., Fu, L. & Kane, C. L. Surface states and topological invariants in three-dimensional topological insulators: Application to bi1−xsbx . Phys. Rev. B 78, 045426 (2008).
Hasan, M. Z. & Kane, C. L. Colloquium: Topological insulators. Rev. Mod. Phys. 82, 3045–3067 (2010).
Zhang, H. et al. Topological insulators in bi2se3, bi2te3 and sb2te3 with a single dirac cone on the surface. Nature Phys 5, 438–442 (2009).
Eremeev, S., Koroteev, Y. & Chulkov, E. Effect of the atomic composition of the surface on the electron surface states in topological insulators a2vb3vi. JETP Letters 91, 387–391 (2010).
Hsieh, T. H. et al. Topological crystalline insulators in the snte material class. Nat. Commun. 3, 982 (2012).
Tanaka, Y. et al. Experimental realization of a topological crystalline insulator in snte. Nature Phys. 8, 800–803 (2012).
Eremeev, S. V., Koroteev, Y. M., Nechaev, I. A. & Chulkov, E. V. Role of surface passivation in the formation of dirac states at polar surfaces of topological crystalline insulators: The case of snte(111). Phys. Rev. B 89, 165424 (2014).
Dziawa, P. et al. Topological crystalline insulator states in pb1-xsnxse. Nat. Mater. 11, 1023–1027 (2012).
Sun, Y. et al. Rocksalt sns and snse: Native topological crystalline insulators. Phys. Rev. B 88, 235122 (2013).
Barone, P. et al. Pressure-induced topological phase transitions in rocksalt chalcogenides. Phys. Rev. B 88, 045207 (2013).
Hsieh, T. H., Liu, J. & Fu, L. Topological crystalline insulators and dirac octets in antiperovskites. Phys. Rev. B 90, 081112 (2014).
Rauch, T., Flieger, M., Henk, J., Mertig, I. & Ernst, A. Dual topological character of chalcogenides: Theory for bi2te3 . Phys. Rev. Lett. 112, 016802 (2014).
Koroteev, Yu. M., Bihlmayer, G., Gayone, J. E., Chulkov, E. V., Blügel, S., Echenique, P. M. & Hofmann, Ph. Strong spin-orbit splitting on bi surfaces. Phys. Rev. Lett. 93, 046403 (2004).
Hofmann, P. The surfaces of bismuth: Structural and electronic properties. Prog. Surf. Sci. 81, 191–245 (2006).
Roy, S. et al. Tuning the dirac point position in bi2se3(0001) via surface carbon doping. Phys. Rev. Lett. 113, 116802 (2014).
Eremeev, S. V. et al. Atom-specific spin mapping and buried topological states in a homologous series of topological insulators. Nat. Commun. 3, 635 (2012).
Eremeev, S. V. et al. Ab initio electronic structure of thallium-based topological insulators. Phys. Rev. B 83, 205129 (2011).
Silkin, I. et al. Natural sulfur-containing minerals as topological insulators with a wide band gap. JETP Letters 96, 322–325 (2012).
Menshchikova, T. V. et al. Band structure engineering in topological insulator based heterostructures. Nano Letters 13, 6064–6069 (2013). PMID: 24274792.
Wada, M., Murakami, S., Freimuth, F. & Bihlmayer, G. Localized edge states in two-dimensional topological insulators: Ultrathin bi films. Phys. Rev. B 83, 121310 (2011).
Drozdov, I. K. et al. One-dimensional topological edge states of bismuth bilayers. Nature Phys. 10, 664–669 (2014).
Wells, J. W. et al. Nondegenerate metallic states on bi(114): A one-dimensional topological metal. Phys. Rev. Lett. 102, 096802 (2009).
Ohtsubo, Y. et al. Non-trivial surface-band dispersion on bi(111). New J. Phys. 15, 033041 (2013).
Aguilera, I., Friedrich, C. & Blügel, S. Electronic phase transitions of bismuth under strain from relativistic self-consistent gw calculations. Phys. Rev. B 91, 125129 (2015).
Hahn, T. The 230 space groups. In Hahn, T. (ed.) International Tables for Crystallography Volume A: Space-group symmetry, vol. A of International Tables for Crystallography, chap. 7, 112–717 (Springer Netherlands, 2002).
Akselrud, L., Hanflandm, M. & Schwarz, U. Refinement of the crystal structure of bi-ii, at 2.54 gpa. Z. Krist-New Cryst. St. 218, 447–448 (2003).
Hsu, C.-H. et al. First-principles study of atomic structures and electronic properties of ultrathin bi films on ge (111). Surf. Sci. 626, 68–75 (2014).
Goedecker, S. Minima hopping: An efficient search method for the global minimum of the potential energy surface of complex molecular systems. J. Chem. Phys. 120, 9911 (2004).
Amsler, M. & Goedecker, S. Crystal structure prediction using the minima hopping method. J. Chem. Phys. 133, 224104 (2010).
Nagao, T. et al. Nanofilm allotrope and phase transformation of ultrathin bi film on si(111)−7 × 7. Phys. Rev. Lett. 93, 105501 (2004).
Koroteev, Y. M., Bihlmayer, G., Chulkov, E. V. & Blügel, S. First-principles investigation of structural and electronic properties of ultrathin bi films. Phys. Rev. B 77, 045428 (2008).
Perdew, J. P., Burke, K. & Ernzerhof, M. Generalized gradient approximation made simple. Phys. Rev. Lett. 77, 3865–3868 (1996).
Yu, R., Qi, X. L., Bernevig, A., Fang, Z. & Dai, X. Equivalent expression of Z2 topological invariant for band insulators using the non-Abelian Berry connection. Physical Review B 84, 1–12 (2011).
Drüppel, M., Krüger, P. & Rohlfing, M. Strain tuning of dirac states at the snte (001) surface. Phys. Rev. B 90, 155312 (2014).
Qian, X., Fu, L. & Li, J. Topological crystalline insulator nanomembrane with strain-tunable band gap. Nano Research 8, 967–979 (2015).
Amsler, M. et al. Novel structural motifs in low energy phases of lialh4 . Phys. Rev. Lett. 108, 205505 (2012).
Flores-Livas, J. A. et al. High-pressure structures of disilane and their superconducting properties. Phys. Rev. Lett. 108, 117004 (2012).
Vergniory, M. G. et al. Comment on “topological insulators in ternary compounds with a honeycomb lattice”. Phys. Rev. Lett. 110, 129701 (2013).
Kresse, G. & Hafner, J. Ab initio molecular dynamics for open-shell transition metals. Phys. Rev. B 48, 13115–13118 (1993).
Kresse, G. & Furthmüler, J. Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set. Computational Materials Science 6, 15–50 (1996).
Kresse, G. & Joubert, D. From ultrasoft pseudopotentials to the projector augmented-wave method. Phys. Rev. B 59, 1758–1775 (1999).
Munoz, F. & Romero, A. Pyprocar (2014).
Gonze, X. & Lee, C. Dynamical matrices, born effective charges, dielectric permittivity tensors and interatomic force constants from density-functional perturbation theory. Phys. Rev. B 55, 10355–10368 (1997).
Togo, A., Oba, F. & Tanaka, I. First-principles calculations of the ferroelastic transition between rutile-type and cacl2-type sio2 at high pressures. Phys. Rev. B 78, 134106 (2008).
Slater, J. C. & Koster, G. F. Simplified lcao method for the periodic potential problem. Phys. Rev. 94, 1498–1524 (1954).
Metropolis, N., Rosenbluth, A. W., Rosenbluth, M. N., Teller, A. H. & Teller, E. Equation of State Calculations by Fast Computing Machines. The Journal of Chemical Physics 21, 1087 (1953).
Prodan, E. Robustness of the spin-chern number. Phys. Rev. B 80, 125327 (2009).
Thouless, D. J., Kohmoto, M., Nightingale, M. P. & den Nijs, M. Quantized hall conductance in a two-dimensional periodic potential. Phys. Rev. Lett. 49, 405–408 (1982).
Acknowledgements
We thank Ivo Souza for interesting and helpful discussions. We acknowledge the computational support from the Extreme Science and Engineering Discovery Environment (XSEDE), which is supported by National Science Foundation Grant No. ACI-1053575. MGV and EVC acknowledge partial support from the Basque Country Government, Departamento de Educación, Universidades e Investigación (Grant No. IT-756-13), the Spanish Ministerio de Economía e Innovación (Grant No. FIS2010-19609-C02-01 and FIS2013-48286-C2-1-P), the FEDER funding, Saint Petersburg State University (Project No. 15.61.202.2015) and the Tomsk State University Competitiveness Improvement Program. FM thanks ‘Financiamiento Basal para Centros Cientificos y Tecnologicos de Excelencia FB 0807’ and Fondecyt grant 1150806. AHR acknowledge the support of DMREF-NSF 1434897 and the Donors of the American Chemical Society Petroleum Research Fund for partial support of this research under contract 54075-ND10. This work was supported by SPP 1666 of the Deutsche Forschungsgemeinschaft (DFG).
Author information
Authors and Affiliations
Contributions
F.M. and M.G.V. made the main calculations and analysis and also wrote the main manuscript text. T.R., J.H. and I.M. calculated the topological integers and helped with the discussion. E.V.C. proposed the idea and leaded the discussion. S.B., M.A.L.M. and A.H.R. made the structural prediction. All authors reviewed the manuscript.
Ethics declarations
Competing interests
The authors declare no competing financial interests.
Electronic supplementary material
Rights and permissions
This work is licensed under a Creative Commons Attribution 4.0 International License. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder to reproduce the material. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/
About this article
Cite this article
Munoz, F., Vergniory, M., Rauch, T. et al. Topological Crystalline Insulator in a New Bi Semiconducting Phase. Sci Rep 6, 21790 (2016). https://doi.org/10.1038/srep21790
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/srep21790
- Springer Nature Limited