Correction: 3D Printing in Medicine 8, 19 (2022)
https://doi.org/10.1186/s41205-022-00146-8
Following publication of the original article [1], the authors reported that there was an issue with figures overlapping in Table 1.
The correct Table 1 has been provided in this Correction.
The original article [1] has been corrected.
Reference
Roytman GR, Ramji AF, Beitler B, et al. Accuracy of guide wire placement for femoral neck stabilization using 3D printed drill guides. 3D Print Med. 2022;8:19. https://doi.org/10.1186/s41205-022-00146-8.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated in a credit line to the data.
About this article
Cite this article
Roytman, G.R., Ramji, A.F., Beitler, B. et al. Correction: Accuracy of guide wire placement for femoral neck stabilization using 3D printed drill guides. 3D Print Med 8, 26 (2022). https://doi.org/10.1186/s41205-022-00153-9
Published:
DOI: https://doi.org/10.1186/s41205-022-00153-9