Correction to: 3D Printing in Medicine (2023) 9:9
Following publication of the original article [1], errors were identified in Table 1. The spelling of the company name Synopsys has been corrected. In addition, software from this company with FDA clearance for 3 applications at the time of the initial publication has been corrected. The spelling of the Ricoh software name has been corrected, and their validated 3D printers have been corrected to add Stratasys F370. The Materialise software Mimics Enlight was added.
A corrected Table 1 is provided.
The original article [1] has been corrected.
References
Paxton NC. Navigating the intersection of 3D printing, software regulation and quality control for point-of-care manufacturing of personalized anatomical models. 3D Print Med. 2023;9:9. https://doi.org/10.1186/s41205-023-00175-x.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
The online version of the original article can be found at https://doi.org/10.1186/s41205-023-00175-x.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated in a credit line to the data.
About this article
Cite this article
Paxton, N.C. Correction: Navigating the intersection of 3D printing, software regulation and quality control for point-of-care manufacturing of personalized anatomical models. 3D Print Med 9, 31 (2023). https://doi.org/10.1186/s41205-023-00194-8
Published:
DOI: https://doi.org/10.1186/s41205-023-00194-8